Top 24 Steel Square Nose End Mills

 

Niagara Cutter N33824 High Speed Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Finishing Cutting 37-Degree 3-Flute 375 OAL 0313 Cut Diameter 0375 Shank Diameter #ad

Niagara Cutter N33824 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Finishing Cutting, 37-Degree, 3-Flute, 3.75″ OAL, 0.313″ Cut Diameter, 0.375″ Shank Diameter

Niagara Cutter N33824 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Finishing Cutting, 37-Degree, 3-Flute, 3.75″ OAL, 0.313″ Cut Diameter, 0.375″ Shank Diameter #ad - Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Three flutes provide a finer finish than two flutes, reducing the need for a second finishing cut in some applications. Rounded area behind the cutting edge (cylindrical land) stabilizes the tool in the cut and leaves a smooth finish on the workpiece. 37-degree helix provides efficient chip evacuation required to machine aluminum and other nonferrous materials. Low surface-roughness on the cutting edge reduces friction and prevents chips from sticking to the tool.

 

Union Butterfield 5270030 Cobalt Steel Square Nose End Mill Inch Weldon Shank TiCN Finish Roughing Cut 4 Flutes 25 Overall Length 38 Cutting Diameter 38 Shank Diameter #ad

Union Butterfield 5270030 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 4 Flutes, 2.5″ Overall Length, 3/8″ Cutting Diameter, 3/8″ Shank Diameter

Union Butterfield 5270030 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Roughing Cut, 4 Flutes, 2.5″ Overall Length, 3/8″ Cutting Diameter, 3/8″ Shank Diameter #ad - Roughing end mills (also called rougher) have chip-breaking cutting edges that remove material in less time than conventional end mills. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than tin coating. Square nose end mills (also called square end) create sharp, unrounded cuts. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.

 

YG-1 E2031 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Non-Center Cutting 30 Deg Helix 4 Flutes 3625 Overall Length 065625 Cutting Diameter 05 Shank Diameter #ad

YG-1 E2031 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 3.625″ Overall Length, 0.65625″ Cutting Diameter, 0.5″ Shank Diameter

YG-1 E2031 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 3.625″ Overall Length, 0.65625″ Cutting Diameter, 0.5″ Shank Diameter #ad - Four flutes produce a better finish than fewer flutes. Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Non-center-cutting design is suitable for peripheral milling and allows end to be resharpened. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

YG-1 E2002 Cobalt Steel Square Nose End Mill Double End Uncoated Bright Finish 30 Deg Helix 4 Flutes 2 Overall Length 01875 Cutting Diameter 01875 Shank Diameter #ad

YG-1 E2002 Cobalt Steel Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 2″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter

YG-1 E2002 Cobalt Steel Square Nose End Mill, Double End, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 2″ Overall Length, 0.1875″ Cutting Diameter, 0.1875″ Shank Diameter #ad - Miniature end mills have small cutting and shank diameters for better control than larger tools when creating precise details and contours. Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life. Stub length increases the strength of the tool, making it less likely to break in the workpiece. Suitable for finishing precision components on steel, stainless steel, titanium, titanium alloys, hard brass and bronze, copper, plastic, wood, aluminum, and aluminum alloys. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.

 

Niagara Cutter N20182 High Speed Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish RoughingFinishing Cut 30-Degree 2-Flute 3125 OAL 0563 Cut Diameter 0500 Shank Diameter #ad

Niagara Cutter N20182 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 3.125″ OAL, 0.563″ Cut Diameter, 0.500″ Shank Diameter

Niagara Cutter N20182 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 3.125″ OAL, 0.563″ Cut Diameter, 0.500″ Shank Diameter #ad - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Square nose end mills (also called square end) create sharp, unrounded cuts. High-speed steel (hss) is compatible with a variety of materials. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

 

Melin Tool A Cobalt Steel Square Nose End Mill Weldon Shank TiCN Monolayer Finish 30 Deg Helix 2 Flutes 36250 Overall Length 08125 Cutting Diameter 0625 Shank Diameter #ad

Melin Tool A Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Monolayer Finish, 30 Deg Helix, 2 Flutes, 3.6250″ Overall Length, 0.8125″ Cutting Diameter, 0.625″ Shank Diameter

Melin Tool A Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Monolayer Finish, 30 Deg Helix, 2 Flutes, 3.6250″ Overall Length, 0.8125″ Cutting Diameter, 0.625″ Shank Diameter #ad - 30 degree helix angle. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. General purpose milling in most materials of medium and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc. Titanium carbonitride coatings are harder and more wear-resistant than tin for improved tool life and faster cutting speeds. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

Melin Tool ERP Cobalt Steel Square Nose End Mill Uncoated Bright Finish Roughing Cut 35 Deg Helix 3 Flutes 26875 Overall Length 04375 Cutting Diameter 03750 Shank Diameter #ad

Melin Tool ERP Cobalt Steel Square Nose End Mill, Uncoated (Bright) Finish, Roughing Cut, 35 Deg Helix, 3 Flutes, 2.6875″ Overall Length, 0.4375″ Cutting Diameter, 0.3750″ Shank Diameter

Melin Tool ERP Cobalt Steel Square Nose End Mill, Uncoated (Bright) Finish, Roughing Cut, 35 Deg Helix, 3 Flutes, 2.6875″ Overall Length, 0.4375″ Cutting Diameter, 0.3750″ Shank Diameter #ad - A rough finish is produced which will require a finishing pass. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Designed to machine soft materials such as aluminum, plastic, zinc alloys. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

Niagara Cutter N88416 Cobalt Steel Square Nose End Mill Weldon Shank TiCN Finish Roughing Cutting Non-Center Cutting 30-Degree 6-Flute 45 OAL 1250 Cut Diameter 1250 Shank Diameter #ad

Niagara Cutter N88416 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing Cutting, Non-Center Cutting, 30-Degree, 6-Flute, 4.5″ OAL, 1.250″ Cut Diameter, 1.250″ Shank Diameter

Niagara Cutter N88416 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing Cutting, Non-Center Cutting, 30-Degree, 6-Flute, 4.5″ OAL, 1.250″ Cut Diameter, 1.250″ Shank Diameter #ad - Titanium carbonitride(ticn) allows for optimal end mill and machine tool performance with it’s ability to increase material removal rates 3 to 5 times that of uncoated tools. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Cobalt roughing end mill for working on all types of materials and high temperature alloys especially slotting and profiling. 6 flute design allows for this end mill to be fed 3 times faster that similar 2 flute end mills.

 

Niagara Cutter N88621 Cobalt Steel Square Nose End Mill Inch Weldon Shank TiCN Finish Finishing Cut 30 Degree Helix 4 Flutes 325 Overall Length 0500 Cutting Diameter 0500 Shank Diameter #ad

Niagara Cutter N88621 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter

Niagara Cutter N88621 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, TiCN Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.25″ Overall Length, 0.500″ Cutting Diameter, 0.500″ Shank Diameter #ad - Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than tin coating. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.

 

Melin Tool CC Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish 30 Deg Helix 4 Flutes 33750 Overall Length 06250 Cutting Diameter 05 Shank Diameter #ad

Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750″ Overall Length, 0.6250″ Cutting Diameter, 0.5″ Shank Diameter

Melin Tool CC Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3.3750″ Overall Length, 0.6250″ Cutting Diameter, 0.5″ Shank Diameter #ad - Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc. 30 degree helix angle. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.

 

Niagara Cutter N88393 Cobalt Steel Square Nose End Mill Weldon Shank TiCN Finish Roughing Cutting Non-Center Cutting 30-Degree 4-Flute 25 OAL 0375 Cut Diameter 0375 Shank Diameter #ad

Niagara Cutter N88393 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing Cutting, Non-Center Cutting, 30-Degree, 4-Flute, 2.5″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter

Niagara Cutter N88393 Cobalt Steel Square Nose End Mill, Weldon Shank, TiCN Finish, Roughing Cutting, Non-Center Cutting, 30-Degree, 4-Flute, 2.5″ OAL, 0.375″ Cut Diameter, 0.375″ Shank Diameter #ad - Number of flutes varies by diameter for optimum feed and cut rate. Fine-pitch tooth design is suitable for machining high-temperature alloys. Titanium carbon nitride (ticn) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than tin coating. Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills. Square end creates sharp, unrounded cuts and has a corner chamfer to strengthen the cutting edges.

 

Wokesi Pack of 7Pcs15 3 5 7 9 11 13mm Blade DiameterHigh Speed SteelSquare Nose End Mill Cutter CNC Router Bits1535791113mm 4Flute HSS #ad

Wokesi Pack of 7Pcs,1.5 3 5 7 9 11 13mm Blade Diameter,High Speed Steel,Square Nose End Mill Cutter CNC Router Bits(1.5+3+5+7+9+11+13mm 4Flute HSS)

Wokesi Pack of 7Pcs,1.5 3 5 7 9 11 13mm Blade Diameter,High Speed Steel,Square Nose End Mill Cutter CNC Router Bits(1.5+3+5+7+9+11+13mm 4Flute HSS) #ad - Materialm2ai,high speed steel,long tool life. 4flute,full grinded,high abrasion resistance,obtain accuracy and fine finish. Suitable for aluminium,cast iron,copper,magnesium alioy,plastics,wood etc. Contains 7pcs square nose endmills15+3+5+7+9+11+13mm inch blade diameter. Package7pcs×cutter.

 

Niagara Cutter N52206 Cobalt Steel Square Nose End Mill Inch Weldon Shank Uncoated Bright Finish Finishing Cut 30 Degree Helix 4 Flutes 3625 Overall Length 0750 Cutting Diameter 0500 Shank Diameter #ad

Niagara Cutter N52206 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.625″ Overall Length, 0.750″ Cutting Diameter, 0.500″ Shank Diameter

Niagara Cutter N52206 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.625″ Overall Length, 0.750″ Cutting Diameter, 0.500″ Shank Diameter #ad - Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Number of flutes varies fewer flutes have more chip-carrying capacity and more flutes produce a finer finish. Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

 

Niagara Cutter N20466 High Speed Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish RoughingFinishing Cut 30-Degree 2-Flute 4125 OAL 1438 Cut Diameter 1 Shank Diameter #ad

Niagara Cutter N20466 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 4.125″ OAL, 1.438″ Cut Diameter, 1″ Shank Diameter

Niagara Cutter N20466 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 4.125″ OAL, 1.438″ Cut Diameter, 1″ Shank Diameter #ad - Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. High-speed steel (hss) is compatible with a variety of materials. Square nose end mills (also called square end) create sharp, unrounded cuts. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material.

 

Niagara Cutter N20446 High Speed Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish RoughingFinishing Cut 30-Degree 2-Flute 4125 OAL 1375 Cut Diameter 1 Shank Diameter #ad

Niagara Cutter N20446 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 4.125″ OAL, 1.375″ Cut Diameter, 1″ Shank Diameter

Niagara Cutter N20446 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 4.125″ OAL, 1.375″ Cut Diameter, 1″ Shank Diameter #ad - Square nose end mills (also called square end) create sharp, unrounded cuts. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. High-speed steel (hss) is compatible with a variety of materials.

 

YG-1 E2170 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Roughing Cut Non-Center Cutting 30 Deg Helix 4 Flutes 25 Overall Length 0375 Cutting Diameter 0375 Shank Diameter #ad

YG-1 E2170 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

YG-1 E2170 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Roughing Cut, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 2.5″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter #ad - Coarse-pitch tooth design and tool geometry are suitable for machining cutting-steel grades and many nonferrous materials. Number of flutes varies by diameter for optimum feed and cut rate. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Roughing end mills have chip-breaking cutting edges that remove material in less time than conventional end mills. Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials.

 

Melin Tool CS-A Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Non-Center Cutting 30 Deg Helix 6 Flutes 3 Overall Length 12500 Cutting Diameter 075 Shank Diameter #ad

Melin Tool CS-A Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 6 Flutes, 3″ Overall Length, 1.2500″ Cutting Diameter, 0.75″ Shank Diameter

Melin Tool CS-A Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 6 Flutes, 3″ Overall Length, 1.2500″ Cutting Diameter, 0.75″ Shank Diameter #ad - Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Not to be used for plunge cutting. Can be used in profiling, keyways, and pockets. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys.

 

Melin Tool C Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Non-Center Cutting 30 Deg Helix 4 Flutes 41250 Overall Length 1 Cutting Diameter 075 Shank Diameter #ad

Melin Tool C Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 4.1250″ Overall Length, 1″ Cutting Diameter, 0.75″ Shank Diameter

Melin Tool C Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 4 Flutes, 4.1250″ Overall Length, 1″ Cutting Diameter, 0.75″ Shank Diameter #ad - Can be used in profiling, keyways, and pockets. Not to be used for plunge cutting. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment.

 

Melin Tool A-M Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish 30 Deg Helix 2 Flutes 27500 Overall Length 02188 Cutting Diameter 03750 Shank Diameter #ad

Melin Tool A-M Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.7500″ Overall Length, 0.2188″ Cutting Diameter, 0.3750″ Shank Diameter

Melin Tool A-M Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 2 Flutes, 2.7500″ Overall Length, 0.2188″ Cutting Diameter, 0.3750″ Shank Diameter #ad - Medium-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Uncoated (bright) tools have no additional surface treatment or coating for use on a range of materials. Suitable for general-purpose machining on most medium-hardness and tough materials, including stainless steel, nickel-based alloys, brass, and iron.

 

Niagara Cutter N72869 Cobalt Steel Square Nose End Mill Metric Weldon Shank Uncoated Bright Finish Finishing Cut 30 Degree Helix 4 Flutes 3375 Overall Length 14mm Cutting Diameter 0500 Shank Diameter #ad

Niagara Cutter N72869 Cobalt Steel Square Nose End Mill, Metric, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.375″ Overall Length, 14mm Cutting Diameter, 0.500″ Shank Diameter

Niagara Cutter N72869 Cobalt Steel Square Nose End Mill, Metric, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 4 Flutes, 3.375″ Overall Length, 14mm Cutting Diameter, 0.500″ Shank Diameter #ad - Four flutes produce a better finish than fewer flutes. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Square nose end mills (also called square end) create sharp, unrounded cuts.

 

Niagara Cutter N22607 High Speed Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish RoughingFinishing Cut 30-Degree 2-Flute 475 OAL 1875 Cut Diameter 1250 Shank Diameter #ad

Niagara Cutter N22607 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 4.75″ OAL, 1.875″ Cut Diameter, 1.250″ Shank Diameter

Niagara Cutter N22607 High Speed Steel Square Nose End Mill, Weldon Shank, Uncoated Bright Finish, Roughing/Finishing Cut, 30-Degree, 2-Flute, 4.75″ OAL, 1.875″ Cut Diameter, 1.250″ Shank Diameter #ad - Square nose end mills (also called square end) create sharp, unrounded cuts. High-speed steel (hss) is compatible with a variety of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material.

 

YG-1 E2160 Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish 30 Deg Helix 3 Flutes 134375 Overall Length 01875 Cutting Diameter 025 Shank Diameter #ad

YG-1 E2160 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 1.34375″ Overall Length, 0.1875″ Cutting Diameter, 0.25″ Shank Diameter

YG-1 E2160 Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, 30 Deg Helix, 3 Flutes, 1.34375″ Overall Length, 0.1875″ Cutting Diameter, 0.25″ Shank Diameter #ad - Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications. Uncoated (bright) tools have no additional surface treatment or coating for a range of materials. Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling. Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel. Stub length increases the strength of the tool, making it less likely to break in the workpiece.

 

YG-1 E1071 High Speed Steel HSS Square Nose End Mill Long Reach Weldon Shank Uncoated Bright Finish 42 Deg Helix 2 Flutes 325 Overall Length 0375 Cutting Diameter 0375 Shank Diameter #ad

YG-1 E1071 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.25″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter

YG-1 E1071 High Speed Steel (HSS) Square Nose End Mill, Long Reach, Weldon Shank, Uncoated (Bright) Finish, 42 Deg Helix, 2 Flutes, 3.25″ Overall Length, 0.375″ Cutting Diameter, 0.375″ Shank Diameter #ad - Suitable for machining on aluminum and other nonferrous materials. Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool’s ability to remove material. 42-degree helix provides increased cutting action compared to end mills with lower helix angles. Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills. High-speed steel for general-purpose cutting.

 

Melin Tool C Cobalt Steel Square Nose End Mill Weldon Shank Uncoated Bright Finish Non-Center Cutting 30 Deg Helix 6 Flutes 42500 Overall Length 18750 Cutting Diameter 075 Shank Diameter #ad

Melin Tool C Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 6 Flutes, 4.2500″ Overall Length, 1.8750″ Cutting Diameter, 0.75″ Shank Diameter

Melin Tool C Cobalt Steel Square Nose End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 30 Deg Helix, 6 Flutes, 4.2500″ Overall Length, 1.8750″ Cutting Diameter, 0.75″ Shank Diameter #ad - Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. Not to be used for plunge cutting. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys. Can be used in profiling, keyways, and pockets. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.