Top 24 Best Laboratory Hoods

 

Labconco 100500000 Protector Premier Laboratory Hood 115V 60 Hz 317 Depth 59 Height 60 Wide Lime

Labconco 100500000 Protector Premier Laboratory Hood, 115V, 60 Hz, 31.7″ Depth, 59″ Height, 60″ Wide, Lime

Labconco 100500000 Protector Premier Laboratory Hood, 115V, 60 Hz, 31.7″ Depth, 59″ Height, 60″ Wide, Lime - Like the protector xstream hoods, protector premier hoods incorporate many containment-enhancing features including clean-sweep technology and the eco-foil air foil. Without seams, the interior has fewer points of deterioration for longer life. Protector premier laboratory hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of labconco’s leading line of fume hoods since 1961. These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere. Features and benefits unique to protector premier laboratory hoods are described below. Testing confirms the protector premier hood meets the sefa-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up.

 

Labconco 2832600 Cold Water Standard Service Fixture Kit for Basic and Fiberglass 30 Laboratory Hoods Green KnobConnector Color 40 psi

Labconco 2832600 Cold Water Standard Service Fixture Kit for Basic and Fiberglass 30 Laboratory Hoods, Green Knob/Connector Color, 40 psi

Labconco 2832600 Cold Water Standard Service Fixture Kit for Basic and Fiberglass 30 Laboratory Hoods, Green Knob/Connector Color, 40 psi - For mounting on the right side fixture panel. Each kit includes one remotely-controlled service fixture with 0. 25″ diameter valve and tubing, color-coded fixture knob and color-coded hose connector.

 

Labconco 100400040 Protector Premier Laboratory Hood 4 Nominal Width Built-in Exhaust Blower 100-115 Volts 60 Hz 10 Amps

Labconco 100400040 Protector Premier Laboratory Hood, 4′ Nominal Width, Built-in Exhaust Blower, 100-115 Volts, 60 Hz, 10 Amps

Labconco 100400040 Protector Premier Laboratory Hood, 4′ Nominal Width, Built-in Exhaust Blower, 100-115 Volts, 60 Hz, 10 Amps - Corrosion-resistant glacier white powder-coated steel exterior. Incorporate many containment-enhancing features including clean-sweep technology and eco-foil air foil. Tempered safety glass vertical-rising sash with powder-coated sash handle. Specially formulated, fiberglass-reinforced polyester offers corrosion, fire resistance and easy clean up. Removable front and side panels, and front service access panels.

 

Labconco 100500002 Protector Premier Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex 115V 60 Hz 317 Depth 60 Width 59 Height

Labconco 100500002 Protector Premier Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex, 115V, 60 Hz, 31.7″ Depth, 60″ Width, 59″ Height

Labconco 100500002 Protector Premier Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex, 115V, 60 Hz, 31.7″ Depth, 60″ Width, 59″ Height - Protector premier laboratory hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of labconco’s leading line of fume hoods since 1961. Without seams, the interior has fewer points of deterioration for longer life. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Testing confirms the protector premier hood meets the sefa-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. Like the protector xstream hoods, protector premier hoods incorporate many containment-enhancing features including clean-sweep technology and the eco-foil air foil. These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere. Features and benefits unique to protector premier laboratory hoods are described below.

 

Labconco 100600021 Protector Premier Laboratory Hood with 2 Service Fixtures 230V 5060 Hz 317 Depth 59 Height 72 Wide Lime

Labconco 100600021 Protector Premier Laboratory Hood with 2 Service Fixtures, 230V, 50/60 Hz, 31.7″ Depth, 59″ Height, 72″ Wide, Lime

Labconco 100600021 Protector Premier Laboratory Hood with 2 Service Fixtures, 230V, 50/60 Hz, 31.7″ Depth, 59″ Height, 72″ Wide, Lime - Testing confirms the protector premier hood meets the sefa-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. Like the protector xstream hoods, protector premier hoods incorporate many containment-enhancing features including clean-sweep technology and the eco-foil air foil. Without seams, the interior has fewer points of deterioration for longer life. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Protector premier laboratory hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of labconco’s leading line of fume hoods since 1961. These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere. Features and benefits unique to protector premier laboratory hoods are described below.

 

Labconco 100400061 Protector Premier Laboratory Hood 4 Nominal Width Built-in Exhaust Blower Explosion-Proof 100-115 volts 60 Hz 10 Amps

Labconco 100400061 Protector Premier Laboratory Hood, 4′ Nominal Width, Built-in Exhaust Blower, Explosion-Proof, 100-115 volts, 60 Hz, 10 Amps

Labconco 100400061 Protector Premier Laboratory Hood, 4′ Nominal Width, Built-in Exhaust Blower, Explosion-Proof, 100-115 volts, 60 Hz, 10 Amps - Specially formulated, fiberglass-reinforced polyester offers corrosion, fire resistance and easy clean up. Removable front and side panels, and front service access panels. Incorporate many containment-enhancing features including clean-sweep technology and eco-foil air foil. Corrosion-resistant glacier white powder-coated steel exterior. Tempered safety glass vertical-rising sash with powder-coated sash handle.

 

LABCONCOBUCHLER 2832605 Gas Standard Service Fixture Kit for Fiberglass 30 Compact Laboratory Hood

LABCONCO/BUCHLER 2832605 Gas Standard Service Fixture Kit for Fiberglass 30 Compact Laboratory Hood

LABCONCO/BUCHLER 2832605 Gas Standard Service Fixture Kit for Fiberglass 30 Compact Laboratory Hood - Each kit includes one remotely-controlled service fixture with 0. For mounting on the right side fixture panel. 25 inch diameter valve and tubing, color-coded fixture knob and color-coded hose connector.

 

Labconco 2247301 Basic 47 Laboratory Hood with Vapor-Proof Lamp and 12 HP Blower Module Fully Assembled 220V 50Hz

Labconco 2247301 Basic 47 Laboratory Hood with Vapor-Proof Lamp and 1/2 HP Blower Module, Fully Assembled, 220V, 50Hz

Labconco 2247301 Basic 47 Laboratory Hood with Vapor-Proof Lamp and 1/2 HP Blower Module, Fully Assembled, 220V, 50Hz - Choose from 4 and 6-foot widths. Basic laboratory hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, basic hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

 

Labconco 100600002 Protector Premier Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex 115V 60 Hz 317 Depth 59 Height 72 Width

Labconco 100600002 Protector Premier Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex, 115V, 60 Hz, 31.7″ Depth, 59″ Height, 72″ Width

Labconco 100600002 Protector Premier Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex, 115V, 60 Hz, 31.7″ Depth, 59″ Height, 72″ Width - Testing confirms the protector premier hood meets the sefa-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. Features and benefits unique to protector premier laboratory hoods are described below. Without seams, the interior has fewer points of deterioration for longer life. Like the protector xstream hoods, protector premier hoods incorporate many containment-enhancing features including clean-sweep technology and the eco-foil air foil. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere. Protector premier laboratory hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of labconco’s leading line of fume hoods since 1961.

 

Labconco 100800002 Protector Premier Laboratory Hood with 2 Service Fixtures and 2 Electrical Duplexes 115V 60 Hz 317 Depth 96 Width 59 Height

Labconco 100800002 Protector Premier Laboratory Hood with 2 Service Fixtures and 2 Electrical Duplexes, 115V, 60 Hz, 31.7″ Depth, 96″ Width, 59″ Height

Labconco 100800002 Protector Premier Laboratory Hood with 2 Service Fixtures and 2 Electrical Duplexes, 115V, 60 Hz, 31.7″ Depth, 96″ Width, 59″ Height - Without seams, the interior has fewer points of deterioration for longer life. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere. Protector premier laboratory hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of labconco’s leading line of fume hoods since 1961. Like the protector xstream hoods, protector premier hoods incorporate many containment-enhancing features including clean-sweep technology and the eco-foil air foil. Features and benefits unique to protector premier laboratory hoods are described below. Testing confirms the protector premier hood meets the sefa-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm.

 

Labconco 2246600 Basic 47 Laboratory Hood with Vapor-Proof Lamp without Blower Module Unassembled 115V 60Hz

Labconco 2246600 Basic 47 Laboratory Hood with Vapor-Proof Lamp, without Blower Module, Unassembled, 115V, 60Hz

Labconco 2246600 Basic 47 Laboratory Hood with Vapor-Proof Lamp, without Blower Module, Unassembled, 115V, 60Hz - Constructed of epoxy-coated steel, basic hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles. Basic laboratory hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Choose from 4 and 6-foot widths.

 

Labconco 110610002 Protector XStream Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex 115V 60Hz 377 Depth

Labconco 110610002 Protector XStream Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex, 115V, 60Hz, 37.7″ Depth

Labconco 110610002 Protector XStream Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex, 115V, 60Hz, 37.7″ Depth - For even greater savings, the protector stream may be factory-prepared to accommodate a variable air volume system without the need for by-pass modifications. The innovative and aerodynamic designs of the sash handle, air foil, upper dilution air supply and rear down flow baffle work in concert to produce horizontal airflow patterns that significantly reduce concentrations of chemical contaminants throughout the work area, particularly near the operator’s breathing zone and at the work surface. 05 ppm leak rate when tested at 4. The protector stream hood provides an excellent economic payback when compared to traditional by-pass hoods operated at 80 or 100 fpm. Testing shows the protector stream easily meets containment per sefa-1 low velocity hood standards when subjected to the ashrae 110 test protocol with results of less than 0. Operating a 6′ protector stream hood at 60 fpm face velocity, with the sash in its fully open position, requires only 690 cfm. The newly redesigned, patented protector stream laboratory hood was engineered to be the best containing fume hood possible. Using the concepts of fluid dynamics, laconic engineers designed the protector stream laboratory hood to produce horizontal airflow, which reduces the tendencies for turbulence. Depending on sash position, tendencies for air turbulence, overtaxing and “the roll” frequently observed during traditional fume hood smoke tests are virtually eliminated. Safety is foremost, but energy savings is equally impressive. 0 lap at osha-recognized 60 fpm face velocity. Energy savings translates to dollar savings. Regardless of your desired operating face velocity, the protector stream yields the lowest required cfm.

 

Labconco 2247401 Basic 47 Laboratory Hood with Vapor-Proof Lamp without Blower Module Fully Assembled 220V 50Hz

Labconco 2247401 Basic 47 Laboratory Hood with Vapor-Proof Lamp, without Blower Module, Fully Assembled, 220V, 50Hz

Labconco 2247401 Basic 47 Laboratory Hood with Vapor-Proof Lamp, without Blower Module, Fully Assembled, 220V, 50Hz - Constructed of epoxy-coated steel, basic hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles. Basic laboratory hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Choose from 4 and 6-foot widths.

 

Labconco 100500060 Protector Premier Laboratory Hood with Built-in Exhaust Blower 230V 60 Hz 317 Depth 66 Height 60 Wide Orange

Labconco 100500060 Protector Premier Laboratory Hood with Built-in Exhaust Blower, 230V, 60 Hz, 31.7″ Depth, 66″ Height, 60″ Wide, Orange

Labconco 100500060 Protector Premier Laboratory Hood with Built-in Exhaust Blower, 230V, 60 Hz, 31.7″ Depth, 66″ Height, 60″ Wide, Orange - Like the protector xstream hoods, protector premier hoods incorporate many containment-enhancing features including clean-sweep technology and the eco-foil air foil. These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere. Without seams, the interior has fewer points of deterioration for longer life. Testing confirms the protector premier hood meets the sefa-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. Features and benefits unique to protector premier laboratory hoods are described below. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Protector premier laboratory hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of labconco’s leading line of fume hoods since 1961.

 

Labconco 110410002 Protector XStream Laboratory Hood 4 Nominal Width 2 Service Fixtures and 1 Electrical Duplex

Labconco 110410002 Protector XStream Laboratory Hood, 4′ Nominal Width, 2 Service Fixtures and 1 Electrical Duplex

Labconco 110410002 Protector XStream Laboratory Hood, 4′ Nominal Width, 2 Service Fixtures and 1 Electrical Duplex - Ergonomic eco-foil air foil that reduces energy consumption from 7-10%. Opti-zone baffle decreases typical face velocity variations found with other baffles. Upper dilution air supply bathes the sash interior with room air to eliminate chemical fumes along the sash plane near breathing zone. Clean-sweep sash handle slots bleed air into the hood chamber and directs fume concentrations away from breathing zone. Dry powder-coated steel exterior.

 

Labconco 100400061 Protector Premier Laboratory Hood 4 Nominal Width Built-in Exhaust Blower and 2 service fixtures 208-230 Volts 60 Hz 5 Amps

Labconco 100400061 Protector Premier Laboratory Hood, 4′ Nominal Width, Built-in Exhaust Blower and 2 service fixtures, 208-230 Volts, 60 Hz, 5 Amps

Labconco 100400061 Protector Premier Laboratory Hood, 4′ Nominal Width, Built-in Exhaust Blower and 2 service fixtures, 208-230 Volts, 60 Hz, 5 Amps - Removable front and side panels, and front service access panels. Tempered safety glass vertical-rising sash with powder-coated sash handle. Corrosion-resistant glacier white powder-coated steel exterior. Incorporate many containment-enhancing features including clean-sweep technology and eco-foil air foil. Specially formulated, fiberglass-reinforced polyester offers corrosion, fire resistance and easy clean up.

 

Labconco 9743208 Guardian Jr Airflow Monitor for Basic Laboratory Hoods 115V 60 Hz

Labconco 9743208 Guardian Jr. Airflow Monitor for Basic Laboratory Hoods, 115V, 60 Hz

Labconco 9743208 Guardian Jr. Airflow Monitor for Basic Laboratory Hoods, 115V, 60 Hz - The test reset switch, when pressed, mutes the alarm. Guardian jr. From the monitor’s face plate, the user can easily select and calibrate a set point between 30 and 250 fpm using a velocity meter and screwdriver. If the hood’s face velocity falls below the set point for more than 6 seconds, an audible alarm sounds and the alert indicator glows red. Airflow monitor senses and alerts the operator to low airflow conditions. Includes face plate with circuit board, electrical power pack, vinyl tubing and airflow tube adapter.

 

LABCONCOBUCHLER 6970601 Protector ClassMate Laboratory Hood 6 Nominal Width 2 Electrical Duplexes 115V 60 Hz 15 Amps 72 W x 3225 D x 59 H

LABCONCO/BUCHLER 6970601 Protector ClassMate Laboratory Hood, 6′ Nominal Width, 2 Electrical Duplexes, 115V, 60 Hz, 15 Amps, 72″ W x 32.25″ D x 59″ H

LABCONCO/BUCHLER 6970601 Protector ClassMate Laboratory Hood, 6′ Nominal Width, 2 Electrical Duplexes, 115V, 60 Hz, 15 Amps, 72″ W x 32.25″ D x 59″ H - 8m (6′) hoods also include horizontal-sliding panels. 5m (5′) and 1. The low-profile spill trough is 3. Baffles direct airflow to the rear of the interior. “) Copper tubing. “. Com for more details. Vwrcatalystâ” offers customer on-site validation, testing & -certification services including face velocity profile test, smoke generation test, tracer gas test, iq, oq, and pq. The upper left fixture is a mounted rigid gooseneck faucet for cold water. ” Classmateâ” laboratory hoods are designed to meet the needs of instructional laboratories. 5, ada, ul 3101-1. All hoods feature bypass airflow design. The remaining two service fixtures are for air and vacuum. Clear tempered safety glass provides excellent visibility even when hoods are placed back to back. A pivoting air foil creates a constant contaminant barrier. 2cm (1″) thick, and at a 5° angle. The hood frame, spill trough, and standard hood air foil are constructed of white dry-powder epoxy-coated steel and aluminum. All hoods conform to the following regulations and standards sefa #1, nfpa #45, astm-e-84, ashrae 110-95, ansi standard z9. Com/equip_services. Six hoods feature the hopec iv design, which adds energy-saving and ergonomic benefits. The vertical-rising sash of the hopec iv 1. You can also visit https//vwr. Etl and etl-c listed. Please call 888-793-2300 or email [email protected]

 

Labconco 2832604 Air Standard Service Fixture Kit for Basic and Fiberglass 30 Laboratory Hoods Orange KnobConnector Color 40 psi

Labconco 2832604 Air Standard Service Fixture Kit for Basic and Fiberglass 30 Laboratory Hoods, Orange Knob/Connector Color, 40 psi

Labconco 2832604 Air Standard Service Fixture Kit for Basic and Fiberglass 30 Laboratory Hoods, Orange Knob/Connector Color, 40 psi - For mounting on the right side fixture panel. Each kit includes one remotely-controlled service fixture with 0. 25″ diameter valve and tubing, color-coded fixture knob and color-coded hose connector.

 

Labconco 2246603 Basic 47 Laboratory Hood with Vapor-Proof Lamp and 13 HP Blower Module Unassembled 115V 60Hz

Labconco 2246603 Basic 47 Laboratory Hood with Vapor-Proof Lamp and 1/3 HP Blower Module, Unassembled, 115V, 60Hz

Labconco 2246603 Basic 47 Laboratory Hood with Vapor-Proof Lamp and 1/3 HP Blower Module, Unassembled, 115V, 60Hz - Constructed of epoxy-coated steel, basic hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles. Choose from 4 and 6-foot widths. Basic laboratory hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required.

 

Labconco 100500040 Protector Premier Laboratory Hood with Built-in Exhaust Blower 115V 60 Hz 317 Depth 66 Height 60 Width

Labconco 100500040 Protector Premier Laboratory Hood with Built-in Exhaust Blower, 115V, 60 Hz, 31.7″ Depth, 66″ Height, 60″ Width

Labconco 100500040 Protector Premier Laboratory Hood with Built-in Exhaust Blower, 115V, 60 Hz, 31.7″ Depth, 66″ Height, 60″ Width - Protector premier laboratory hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of labconco’s leading line of fume hoods since 1961. Like the protector xstream hoods, protector premier hoods incorporate many containment-enhancing features including clean-sweep technology and the eco-foil air foil. Without seams, the interior has fewer points of deterioration for longer life. Testing confirms the protector premier hood meets the sefa-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Features and benefits unique to protector premier laboratory hoods are described below. These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere.

 

Labconco 100600061 Protector Premier Laboratory Hood with Built-in Exhaust Blower and 2 Service Fixtures 230V 60 Hz 317 Depth 66 Height 72 Width

Labconco 100600061 Protector Premier Laboratory Hood with Built-in Exhaust Blower and 2 Service Fixtures, 230V, 60 Hz, 31.7″ Depth, 66″ Height, 72″ Width

Labconco 100600061 Protector Premier Laboratory Hood with Built-in Exhaust Blower and 2 Service Fixtures, 230V, 60 Hz, 31.7″ Depth, 66″ Height, 72″ Width - These hoods are offered for use with a remotely-located blower or with a built-in blower — the only high performance hood with built-in blower available anywhere. Like the protector xstream hoods, protector premier hoods incorporate many containment-enhancing features including clean-sweep technology and the eco-foil air foil. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Testing confirms the protector premier hood meets the sefa-1 standard of a low velocity, high performance hood and may be operated as low as 60 fpm. Without seams, the interior has fewer points of deterioration for longer life. Features and benefits unique to protector premier laboratory hoods are described below. Protector premier laboratory hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of labconco’s leading line of fume hoods since 1961.

 

Labconco 110510002 Protector XStream Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex 115V 60 Hz 377 Depth 59 Height 60 Wide

Labconco 110510002 Protector XStream Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex, 115V, 60 Hz, 37.7″ Depth, 59″ Height, 60″ Wide

Labconco 110510002 Protector XStream Laboratory Hood with 2 Service Fixtures and 1 Electrical Duplex, 115V, 60 Hz, 37.7″ Depth, 59″ Height, 60″ Wide - For even greater savings, the protector xstream may be factory-prepared to accommodate a variable air volume system without the need for by-pass modifications. 05 ppm leak rate when tested at 4. 0 lpm at osha-recognized 60 fpm face velocity. The protector xstream hood provides an excellent economic payback when compared to traditional by-pass hoods operated at 80 or 100 fpm. Energy savings translates to dollar savings. Depending on sash position, tendencies for air turbulence, vortexing and “the roll” frequently observed during traditional fume hood smoke tests are virtually eliminated. Operating a 6′ protector xstream hood at 60 fpm face velocity, with the sash in its fully open position, requires only 690 cfm. The newly redesigned, patented protector xstream laboratory hood was engineered to be the best containing fume hood possible. Safety is foremost, but energy savings is equally impressive. Regardless of your desired operating face velocity, the protector xstream yields the lowest required cfm. Using the concepts of fluid dynamics, labconco engineers designed the protector xstream laboratory hood to produce horizontal airflow, which reduces the tendencies for turbulence. The innovative and aerodynamic designs of the sash handle, air foil, upper dilution air supply and rear down flow baffle work in concert to produce horizontal airflow patterns that significantly reduce concentrations of chemical contaminants throughout the work area, particularly near the operator’s breathing zone and at the work surface. Testing shows the protector xstream easily meets containment per sefa-1 low velocity hood standards when subjected to the ashrae 110 test protocol with results of less than 0.

 

Labconco 9743209 Guardian Digital Airflow Monitor for Basic Laboratory Hoods 230 volts 50 Hz

Labconco 9743209 Guardian Digital Airflow Monitor for Basic Laboratory Hoods, 230 volts, 50 Hz

Labconco 9743209 Guardian Digital Airflow Monitor for Basic Laboratory Hoods, 230 volts, 50 Hz - Each monitor includes a face plate with circuit board, electrical power pack, vinyl tubing, side wall flow tube adapter and wiring instructions. Guardian digital airflow monitor senses and alerts the operator to low airflow conditions. An lcd displays actual face velocity. Purge switch, when configured and pressed, can be used to activate a relay to open a hood damper (not included). The emerg. The test reset switch, when pressed, mutes the audible alarm. From the monitor’s face plate, the user can easily select and calibrate a setpoint between 50 and 250 fpm using a velocity meter. If the hood’s face velocity falls below the programmable set point, an audible alarm sounds and the low indicator glows red.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.