Top 21 Esd Mats

 

ACL Staticide 8285RBM2460 Dualmat ESD Table Mat 60 Length x 24 Width Royal Blue

ACL Staticide 8285RBM2460 Dualmat ESD Table Mat, 60″ Length x 24″ Width, Royal Blue

ACL Staticide 8285RBM2460 Dualmat ESD Table Mat, 60″ Length x 24″ Width, Royal Blue - Low out gassing and voc are ideal for clean-rooms and other controlled environments. Measures 60-inches length by 24-inches width. Hardness 85 +/-5 shore a per astm d-2240. The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. Durable surface withstands high temperatures, solder, flux, and harsh chemicals. This material was developed to conform to the most stringent esd and lead-free requirements. 05 second decay time ensures rapid, safe static drain. No vinyl monomers or dop ensures conformity to personal and environmental safety standards. Because it is inherently cross-linked the material will not delaminate and is volume conductive. It is suitable for use with constant monitor systems. Temperature resistance withstands soldering iron contact at 250 degree f (121 degree c) can withstand environmental temperatures up to 600 degree f (315 degree c). Embossed finish reduces glare and prevents parts from slipping. Acl staticide dualmat esd mat is a static dissipative industrial-grade elastomer designed for use on tables and other grounded work bench surfaces. Ground cords sold separately. Dualmat is a chemically cross-linked material with different electrical resistances on each side. Uv additivesprovide color stability and prevent fading. Unlike the competition’s surface dissipative mats, the electrical properties of the dualmat are volume dissipative. 1 to 100 megohms, ohms per cm for rtt, rtg, and vol r meets industry electrical specifications in all humidities. 080-inches (2mm) thickness allows mat to remain flat and prevents curled edges. The layers are permanently dissipative with polymers that will not lose electrical properties, will not exudates and more importantly will not outgas and contaminate clean room environments.

 

StaticTech Smooth ESD Table Mat Kit with Adjustable Wrist Strap 4mm Snap 6 Coil Cord 38 10mm Female Snap 24 x 48 Gray

StaticTech Smooth ESD Table Mat Kit with Adjustable Wrist Strap (4mm Snap, 6′ Coil Cord) & 3/8″ (10mm) Female Snap… (24″ x 48″, Gray)

StaticTech Smooth ESD Table Mat Kit with Adjustable Wrist Strap (4mm Snap, 6′ Coil Cord) & 3/8″ (10mm) Female Snap… (24″ x 48″, Gray) - Dual-layer esd bench mats defuse static electricity on tables or grounded workbench surfaces via a conductive backing layer and a static dissipative top layer. Adjustable elastic wrist strap meets eia-625, mil-std-1686, and mil-hdbk-263 requirements. Surface resistance measures greater than 1×106 ohms to 1×109 ohms. Set includes esd table mat, adjustable wrist strap with 4mm snaps, 6′ coil cord & female snap 10mm.

 

ESD Mat Kit with a Wrist Strap and Grounding Cord Dual Bench Grounding Three Layer Vinyl 24 X 48 2 Wide x 4 Long x 0125 Thick Blue

ESD Mat Kit with a Wrist Strap and Grounding Cord, Dual Bench Grounding, Three Layer Vinyl, 24″ X 48″ (2′ Wide x 4′ Long x 0.125″ Thick), Blue

ESD Mat Kit with a Wrist Strap and Grounding Cord, Dual Bench Grounding, Three Layer Vinyl, 24″ X 48″ (2′ Wide x 4′ Long x 0.125″ Thick), Blue - Feature a three layer design, 0125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide it is compatible for use with continuous monitors meets the esd work surface. Construction heat fused vinyl composite,thickness 0125″ (32mm) , hardness 45 shore “a”, per astm-d412. Abrasion resistance greater than 750 cycles, per tabor-cs17 , heat resistance -20°f to 140°f continuous. Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines. Tensile strength greater than 300 psi, per astm-d412, tear strength greater than 80 lbs/inch, per astm-d624.

 

Swwip ESD mat Package is 1 matBagSize is 24x27524inchesx275 inches it Offers an Excellent Resistance to Oil Grease and Most solvents and are Lighter Than Our Single and Three Layer mats

Swwip ESD mat Package is 1 mat/Bag,Size is 24”x27.5”(24inchesx27.5 inches) it Offers an Excellent Resistance to Oil, Grease and Most solvents, and are Lighter Than Our Single and Three Layer mats.

Swwip ESD mat Package is 1 mat/Bag,Size is 24”x27.5”(24inchesx27.5 inches) it Offers an Excellent Resistance to Oil, Grease and Most solvents, and are Lighter Than Our Single and Three Layer mats. - 1) 2-layers mat -top layer static dissipative nbr resistivity of top layer 10^8-9/sq -bottom layer conductive nbr resistivity of bottom layer 10^4-5 /sq. 5) applicatin it is useful for semiconductor,computer & electronic parts factories, electronic exchange or oa machinery rooms,and chemical laboratories, will not peel, chip, or curl. 2) colors blue. 4) tensile strength (mpa) 279 elongation(%) 295 resistance to group less than 107 /sq chemical resistance solvent, acidic, alkali, oil, aromatics non chemical resistance d o p ketone 5kv decay time < 001sec. 3) thickness (2mm).

 

Rubber ESD Anti-Static HIGH Temperature Soldering MAT-36 X 72 3 x 6 - 008 Thick- with Ground Cable-Blue

Rubber ESD Anti-Static HIGH Temperature Soldering MAT-36″ X 72″ (3′ x 6′) – 0.08″ Thick- with Ground Cable-Blue

Rubber ESD Anti-Static HIGH Temperature Soldering MAT-36″ X 72″ (3′ x 6′) – 0.08″ Thick- with Ground Cable-Blue - Bottom layer conductive layer (15mm thickness). Durable and high quality esd mat have superior heat-, chemical-, and wear-resistance. Top layer static-“dissipative layer” ( 05mm thickness ). Resistance rtt38 x 10^6 to 1 x 10^8, rtg24 x 10^7 to 1x 10^8, surface. Heat resistance (600of, 10 sec no smell, no melt).

 

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30 X 60 25 x 5 - 008 Thick- with Dual Point and Wrist Strap-Green

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30″ X 60″ (2.5′ x 5′) – 0.08″ Thick- with Dual Point and Wrist Strap-Green

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30″ X 60″ (2.5′ x 5′) – 0.08″ Thick- with Dual Point and Wrist Strap-Green - Resistance rtt38 x 10^6 to 1 x 10^8, rtg24 x 10^7 to 1x 10^8, surface. Durable and high quality esd mat have superior heat-, chemical-, and wear-resistance. Top layer static-“dissipative layer” ( 05mm thickness ). Bottom layer conductive layer (15mm thickness). Heat resistance (600of, 10 sec no smell, no melt).

 

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24 X 36 2x 3 - 008 Thick- with Dual Bench and Wrist Strap-Blue

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24″ X 36″ (2’x 3′) – 0.08″ Thick- with Dual Bench and Wrist Strap-Blue

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24″ X 36″ (2’x 3′) – 0.08″ Thick- with Dual Bench and Wrist Strap-Blue - Top layer static-“dissipative layer” ( 05mm thickness ). Resistance rtt38 x 10^6 to 1 x 10^8, rtg24 x 10^7 to 1x 10^8, surface. Durable and high quality esd mat have superior heat-, chemical-, and wear-resistance. Bottom layer conductive layer (15mm thickness). Heat resistance (600of, 10 sec no smell, no melt).

 

ACL Staticide 8285RBM2436 Dualmat ESD Table Mat 24 Length x 36 Width Royal Blue

ACL Staticide 8285RBM2436 Dualmat ESD Table Mat, 24″ Length x 36″ Width, Royal Blue

ACL Staticide 8285RBM2436 Dualmat ESD Table Mat, 24″ Length x 36″ Width, Royal Blue - It is suitable for use with constant monitor systems. Because it is inherently cross-linked the material will not delaminate and is volume conductive. The material is as durable as rigid laminates, and as comfortable and appealing as softer rubber or vinyl mats. 1 to 100 megohms, ohms per cm for rtt, rtg, and vol r meets industry electrical specifications in all humidities. Measures 24-inches length by 36-inches width. Embossed finish reduces glare and prevents parts from slipping. This material was developed to conform to the most stringent esd and lead-free requirements. 080-inches (2mm) thickness allows mat to remain flat and prevents curled edges. No vinyl monomers or dop ensures conformity to personal and environmental safety standards. Hardness 85 +/-5 shore a per astm d-2240. Unlike the competition’s surface dissipative mats, the electrical properties of the dualmat are volume dissipative. Acl staticide dualmat esd mat is a static dissipative industrial-grade elastomer designed for use on tables and other grounded work bench surfaces. The layers are permanently dissipative with polymers that will not lose electrical properties, will not exudates and more importantly will not outgas and contaminate clean room environments. Uv additivesprovide color stability and prevent fading. Ground cords sold separately. Temperature resistance withstands soldering iron contact at 250 degree f (121 degree c) can withstand environmental temperatures up to 600 degree f (315 degree c). Durable surface withstands high temperatures, solder, flux, and harsh chemicals. Low out gassing and voc are ideal for clean-rooms and other controlled environments. 05 second decay time ensures rapid, safe static drain. Dualmat is a chemically cross-linked material with different electrical resistances on each side.

 

Bertech ESD Mat Roll 3 Wide x 25 Long x 0093 Thick Blue Made in USA

Bertech ESD Mat Roll, 3′ Wide x 25′ Long x 0.093″ Thick, Blue (Made in USA)

Bertech ESD Mat Roll, 3′ Wide x 25′ Long x 0.093″ Thick, Blue (Made in USA) - Service temperature is -20 degrees to 160 degrees fahrenheit. Rohs compliant. Bertech esd mats are made of a single layer polymer mix. Surface resistivity is 10^9, 10^10 ohms. They are designed to provide a static safe work surface for static sensitive products. Made in usa. These esd mats are low cost, durable, easy to cut, and are reversible.

 

Bertech ESD High Temperature Rubber Mat Roll 3 Wide x 25 Long x 008 Thick Gray

Bertech ESD High Temperature Rubber Mat Roll, 3′ Wide x 25′ Long x 0.08″ Thick, Gray

Bertech ESD High Temperature Rubber Mat Roll, 3′ Wide x 25′ Long x 0.08″ Thick, Gray - Esd high temperature mats offer excellent resistance to oil, grease, and most common solvents. The top layer is a gray static dissipative rubber layer laminated to a black conductive rubber bottom layer. This mat is very light compared to our single layer and three layer mats. Rohs compliant. Bertech esd high temperature mat rolls are. Resistance to ground (bottom layer) is 8 x 10^6 -8 ohms and point-to-point resistance is 2 x 10^6 -8 ohms. 08 inches thick and have two layers.

 

DAOKI Green Desktop Anti Static ESD Mat 12 x 16 for Phone PC Tablet Repair

DAOKI Green Desktop Anti Static ESD Mat 12″ x 16″ for Phone PC Tablet Repair

DAOKI Green Desktop Anti Static ESD Mat 12″ x 16″ for Phone PC Tablet Repair - Great to use in production department and advanced lab in microelectronic industry such as electronic semiconductor components, computers, electronic communication devices and integrated circuits. Durable and easy to clean. Protect esd components during producing or repairing. Good acid proof, alkali proof and chemical solvents proof. Green desktop anti static mat.

 

Three Layer Dissipative Vinyl Anti-Static ESD Mat -30 X 96 25x 8 - 0125 Thick- with Dual Bench and Wrist Strap-Gray

Three Layer Dissipative Vinyl Anti-Static ESD Mat -30″ X 96″ (2.5’x 8′) – 0.125″ Thick- with Dual Bench and Wrist Strap-Gray

Three Layer Dissipative Vinyl Anti-Static ESD Mat -30″ X 96″ (2.5’x 8′) – 0.125″ Thick- with Dual Bench and Wrist Strap-Gray - Construction heat fused vinyl composite,thickness 0125″ (32mm) , hardness 45 shore “a”, per astm-d412. Tensile strength greater than 300 psi, per astm-d412, tear strength greater than 80 lbs/inch, per astm-d624. Feature a three layer design, 0125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide it is compatible for use with continuous monitors meets the esd work surface. Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines. Abrasion resistance greater than 750 cycles, per tabor-cs17 , heat resistance -20°f to 140°f continuous.

 

ESDELES ESD Desktop Lab Mat Kit Portable Anti-Static High Temperature Rubber Mat with a Wrist Strap and Grounding Cord Blue Blue 600X900mm

ESDELES ESD Desktop Lab Mat Kit Portable Anti-Static High Temperature Rubber Mat with a Wrist Strap and Grounding Cord Blue (Blue 600X900mm)

ESDELES ESD Desktop Lab Mat Kit Portable Anti-Static High Temperature Rubber Mat with a Wrist Strap and Grounding Cord Blue (Blue 600X900mm) - Esdeles esd mat you are worth it esd rubber mat or conductive ground mats should be laid out in the workshops and advanced laboratories for microelectronic industries such as electronic semi-conduct devices,electronic computer,electronic communication equipment and integrated circuits and etc, to eliminate damages by static electricity.

 

ESD High Temperature Mat Kit  16 x 24  Emerald Green  with 1 ESD Wrist Strap 1 ESD Grounding Cord 1 Bottle of Mat Cleaner

ESD High Temperature Mat Kit | 16″ x 24″ | Emerald Green | with (1) ESD Wrist Strap, (1) ESD Grounding Cord, (1) Bottle of Mat Cleaner

ESD High Temperature Mat Kit | 16″ x 24″ | Emerald Green | with (1) ESD Wrist Strap, (1) ESD Grounding Cord, (1) Bottle of Mat Cleaner - Complete esd anti-static kit comes with (1) 16″ x 24″ esd mat with two built-in grounding snaps, (1) 6 ft wrist strap band with metal underside and removable alligator clip, (1) 15 ft attachable grounding cord with removable alligator clip, (1) esd mat cleaner. Discharges electrostatic to protect your electronics the esd mat is 080″ (2mm) thick, dual sided, and made of a static dissipative, industrial grade elastomer the surface has been specially embossed to reduce light glare and prevent parts from slipping. Double layered & made in the usa a workstation pad that withstands high temperatures, soldering iron deformation, solvents, flux, and other harsh chemicals does not curl. Environmentally safe & rohs compliant material is free from lead, arsenic, barium, vinyl monomer, chromium, and other dangerous volatiles no rubber or chemical smell. Outstanding charge dissipation or your money back meets ansi/ esd s2020 & european iec 613450-5-1 standards for charge reduction which means low tribogeneration, and ultra-rapid (05 second) charge decay.

 

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24 X 36 2x 3 - 008 Thick- with Dual Point and Wrist Strap-Blue

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24″ X 36″ (2’x 3′) – 0.08″ Thick- with Dual Point and Wrist Strap-Blue

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-24″ X 36″ (2’x 3′) – 0.08″ Thick- with Dual Point and Wrist Strap-Blue - Heat resistance (600of, 10 sec no smell, no melt). Resistance rtt38 x 10^6 to 1 x 10^8, rtg24 x 10^7 to 1x 10^8, surface.

 

Bertech ESD Mat Roll 3 Wide x 10 Long x 0093 Thick Gray

Bertech ESD Mat Roll 3′ Wide x 10′ Long x 0.093″ Thick, Gray

Bertech ESD Mat Roll 3′ Wide x 10′ Long x 0.093″ Thick, Gray - Bertech esd mats are made of a single layer polymer mix. Made in usa. Rohs compliant. Service temperature is -20 degrees to 160 degrees fahrenheit. These esd mats are low cost, durable, easy to cut, and are reversible. They are designed to provide a static safe work surface for static sensitive products.

 

Staticide ESD Mat Cleaner 1 Gallon

Staticide ESD Mat Cleaner, 1 Gallon

Staticide ESD Mat Cleaner, 1 Gallon - Tensile strength greater than 300 psi, per astm-d412, tear strength greater than 80 lbs/inch, per astm-d624. Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines. Construction heat fused vinyl composite,thickness 0125″ (32mm) , hardness 45 shore “a”, per astm-d412. Feature a three layer design, 0125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide it is compatible for use with continuous monitors meets the esd work surface. Please read full description carefully before ordering.

 

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30 X 72 25x 6 - 008 Thick- with Dual Point and Wrist Strap-Blue

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30″ X 72″ (2.5’x 6′) – 0.08″ Thick- with Dual Point and Wrist Strap-Blue

Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-30″ X 72″ (2.5’x 6′) – 0.08″ Thick- with Dual Point and Wrist Strap-Blue - Top layer static-“dissipative layer” ( 05mm thickness ). Heat resistance (600of, 10 sec no smell, no melt). Resistance rtt38 x 10^6 to 1 x 10^8, rtg24 x 10^7 to 1x 10^8, surface. Durable and high quality esd mat have superior heat-, chemical-, and wear-resistance.

 

ESD Mat with a Grounding Cord Three Layer Vinyl 24 X 36 2 Wide x 3 Long x 0125 Thick Blue

ESD Mat with a Grounding Cord, Three Layer Vinyl, 24″ X 36″ (2′ Wide x 3′ Long x 0.125″ Thick), Blue

ESD Mat with a Grounding Cord, Three Layer Vinyl, 24″ X 36″ (2′ Wide x 3′ Long x 0.125″ Thick), Blue - Construction heat fused vinyl composite,thickness 0125″ (32mm) , hardness 45 shore “a”, per astm-d412. Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines. Tensile strength greater than 300 psi, per astm-d412, tear strength greater than 80 lbs/inch, per astm-d624. Feature a three layer design, 0125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide it is compatible for use with continuous monitors meets the esd work surface. Abrasion resistance greater than 750 cycles, per tabor-cs17 , heat resistance -20°f to 140°f continuous.

 

DissipativeConductive Anti Static ESD Rubber Floor Mat Grey Speckled 3 mil Thick- 36x 60 3 x 5

Dissipative,Conductive Anti Static ESD Rubber Floor Mat, Grey Speckled, 3 mil Thick- 36″x 60″ (3′ x 5′)

Dissipative,Conductive Anti Static ESD Rubber Floor Mat, Grey Speckled, 3 mil Thick- 36″x 60″ (3′ x 5′) - Common chemicals used in assembly areas will not harm electrical properties of the mat. Conductive bottom layer will drain the charge quickly to ground. Dissipative upper layer will drain a static charge to the conductive layer below. Heat and chemical resistant to hold-up against hot soldering irons, molten solder, and many common chemicals. Durable rubber material withstands pcb truck and cart traffic without peeling, chipping, or curling.

 

Three Layer Dissipative Vinyl Anti-Static ESD Mat -24 X 72 2x 6 - 0125 Thick- with Ground Cable-Gray

Three Layer Dissipative Vinyl Anti-Static ESD Mat -24″ X 72″ (2’x 6′) – 0.125″ Thick- with Ground Cable-Gray

Three Layer Dissipative Vinyl Anti-Static ESD Mat -24″ X 72″ (2’x 6′) – 0.125″ Thick- with Ground Cable-Gray - Feature a three layer design, 0125 inch thick,provide excellent electrical, and ergonomic comfort that only a foam back material can provide it is compatible for use with continuous monitors meets the esd work surface. Construction heat fused vinyl composite,thickness 0125″ (32mm) , hardness 45 shore “a”, per astm-d412. Tensile strength greater than 300 psi, per astm-d412, tear strength greater than 80 lbs/inch, per astm-d624. Abrasion resistance greater than 750 cycles, per tabor-cs17 , heat resistance -20°f to 140°f continuous. Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic hydrocarbons, mineral oil, aldehydes, and amines.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.