Top 21 Best Astm A276s

 

304 Stainless Steel Rectangular Bar Unpolished Mill Finish Annealed ASTM A276 516 Thick 1 Width 12 Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, ASTM A276, 5/16″ Thick, 1″ Width, 12″ Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, ASTM A276, 5/16″ Thick, 1″ Width, 12″ Length - The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. The 304 stainless steel rectangular bar has an unpolished (mill) surface, has been annealed, and meets american society for testing and materials international astm a276 specifications. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. Martensitic grades can be heat treated. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The material has been annealed to modify its properties after shaping. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. The material is typically nonmagnetic but may become slightly magnetic when cold worked. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. Magnetism characterizes how much the material is repelled by or attracted to a magnet. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel.

 

Stainless Steel 316 Square Bar Annealed Temper ASTM A276 18 Thick 18 Width 36 Length

Stainless Steel 316 Square Bar, Annealed Temper, ASTM A276, 1/8″ Thick, 1/8″ Width, 36″ Length

Stainless Steel 316 Square Bar, Annealed Temper, ASTM A276, 1/8″ Thick, 1/8″ Width, 36″ Length - Unpolished (mill) surface has no finish. Meets astm a276 specifications. Annealed after shaping to modify the metal’s properties. 304 stainless steel is the most commonly used grade of stainless steel due to its combination of corrosion resistance, weldability, and formability.

 

304 Stainless Steel Sheet Unpolished Mill Finish Precision Tolerance ASTM A276 05 Thickness 8 Width 12 Length

304 Stainless Steel Sheet, Unpolished (Mill) Finish, Precision Tolerance, ASTM A276, 0.5″ Thickness, 8″ Width, 12″ Length

304 Stainless Steel Sheet, Unpolished (Mill) Finish, Precision Tolerance, ASTM A276, 0.5″ Thickness, 8″ Width, 12″ Length - Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The material is typically nonmagentic but may become slightly magnetic when cold worked. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. The 304 stainless steel sheet has an unpolished (mill) surface, meets american society for testing and materials international astm a276 specifications, and has a precision tolerance. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. Magnetism characterizes how much the material is repelled by or attracted to a magnet. Martensitic grades can be heat treated. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Formability indicates how easily the material can be permanently shaped. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening.

 

316 Stainless Steel Rectangular Bar Unpolished Mill Finish Annealed ASTM A276 14 Thickness 14 Width 36 Length

316 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, ASTM A276, 1/4″ Thickness, 1/4″ Width, 36″ Length

316 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, ASTM A276, 1/4″ Thickness, 1/4″ Width, 36″ Length - Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The material has been annealed, a method of heating and cooling metal to modify its properties, such as increasing its formability and toughness or decreasing its strength, after it has been shaped. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. The 316 stainless steel rectangular bar has an unpolished (mill) surface, has been annealed, meets american society for testing and materials international astm a276 specifications, and has a standard tolerance. Magnetism characterizes how much the material is repelled by or attracted to a magnet. The 316 stainless steel grade provides better corrosion resistance than general-purpose 304 stainless steel, especially in marine environments, due to higher nickel content and the addition of molybdenum. An austenitic stainless steel, 316 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. Martensitic grades can be heat treated. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. Formability indicates how easily the material can be permanently shaped. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces.

 

440C Stainless Steel Round Rod Unpolished Mill Finish AnnealedCold Finished AMS 5630AMS QQ-S 763ASTM A276 Standard Tolerance 275 Diameter 12 Length

440C Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed/Cold Finished, AMS 5630/AMS QQ-S 763/ASTM A276, Standard Tolerance, 2.75″ Diameter, 12″ Length

440C Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed/Cold Finished, AMS 5630/AMS QQ-S 763/ASTM A276, Standard Tolerance, 2.75″ Diameter, 12″ Length - Standard tolerance. Annealed after shaping to modify the metal’s properties, and then cold finished to the specified dimensions. Meets ams 5630, ams qq-s-763, and astm a276 specifications. 440c stainless steel is wear resistant and can be heat treated to very high hardness ratings, surpassing the hardness of 440a and 440b stainless steel. Unpolished (mill) surface has no finish.

 

304 Stainless Steel Sheet Unpolished Mill Finish ASTM A276 1 Thickness 2 Width 6 Length

304 Stainless Steel Sheet, Unpolished (Mill) Finish, ASTM A276, 1″ Thickness, 2″ Width, 6″ Length

304 Stainless Steel Sheet, Unpolished (Mill) Finish, ASTM A276, 1″ Thickness, 2″ Width, 6″ Length - The material is typically nonmagentic but may become slightly magnetic when cold worked. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. Magnetism characterizes how much the material is repelled by or attracted to a magnet. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. The 304 stainless steel sheet has an unpolished (mill) surface, meets american society for testing and materials international astm a276 specifications, and has a standard tolerance. Martensitic grades can be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability.

 

316 Stainless Steel Angle Unpolished Mill Finish ASTM A276 Equal Leg Length Rounded Corners 1-12 Leg Lengths 0125 Wall Thickness 24 Length

316 Stainless Steel Angle, Unpolished (Mill) Finish, ASTM A276, Equal Leg Length, Rounded Corners, 1-1/2″ Leg Lengths, 0.125″ Wall Thickness, 24″ Length

316 Stainless Steel Angle, Unpolished (Mill) Finish, ASTM A276, Equal Leg Length, Rounded Corners, 1-1/2″ Leg Lengths, 0.125″ Wall Thickness, 24″ Length - Formability indicates how easily the material can be permanently shaped. An austenitic stainless steel, 316 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The 316 stainless steel angle has equal-length legs with rounded corners, an unpolished (mill) surface, and a precision tolerance and meets american society for testing and materials international astm a276 specifications. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. Martensitic grades can be heat treated. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. Magnetism characterizes how much the material is repelled by or attracted to a magnet. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. The 316 stainless steel grade provides better corrosion resistance than general-purpose 304 stainless steel, especially in marine environments, due to higher nickel content and the addition of molybdenum. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

 

304 Stainless Steel Rectangular Bar Unpolished Mill Finish Annealed 0 Annealed Temper ASTM A276 14 Thickness 12 Width 36 Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, ASTM A276, 1/4″ Thickness, 1/2″ Width, 36″ Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, ASTM A276, 1/4″ Thickness, 1/2″ Width, 36″ Length - Standard tolerance. Annealed after shaping to modify the metal’s properties. Meets astm a276 specifications. 304 stainless steel is the most commonly used grade of stainless steel due to its combination of corrosion resistance, weldability, and formability. Unpolished (mill) surface has no finish.

 

440C Stainless Steel Round Rod Unpolished Mill Finish ASTM A276 0437 Diameter 36 Length

440C Stainless Steel Round Rod, Unpolished (Mill) Finish, ASTM A276, 0.437″ Diameter, 36″ Length

440C Stainless Steel Round Rod, Unpolished (Mill) Finish, ASTM A276, 0.437″ Diameter, 36″ Length - Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. Magnetism characterizes how much the material is repelled by or attracted to a magnet. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. The 440c stainless steel grade is wear resistant, offers mild corrosion resistance, and can be heat treated to very high hardness. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Formability indicates how easily the material can be permanently shaped. It can attain higher hardness than 440a and 440b when in the hardened condition. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. Martensitic grades can be heat treated. A martensitic stainless steel, 440c is magnetic. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. The 440c stainless steel round rod has an unpolished (mill) surface, meets american society for testing and materials international astm a276 specifications, and has a standard tolerance.

 

Nitronic 60 Stainless Steel Round Rod Unpolished Mill Finish Annealed ASTM A276ASTM A479AMS 5848 175 Diameter 72 Length

Nitronic 60 Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed, ASTM A276/ASTM A479/AMS 5848, 1.75″ Diameter, 72″ Length

Nitronic 60 Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed, ASTM A276/ASTM A479/AMS 5848, 1.75″ Diameter, 72″ Length - Meets astm a276, astm a479, and ams 5848 specifications. Annealed after shaping to modify the metal’s properties. Standard tolerance. Unpolished (mill) surface has no finish. Nitronic 60 stainless steel is highly wear and gall resistant in both room and elevated temperatures, and offers general corrosion resistance similar to 304 stainless steel but with greater resistance to localized corrosion when exposed to chloride.

 

304 Stainless Steel Rectangular Bar Unpolished Mill Finish Cold-Finished Annealed ASTM A276 78 Thick 78 Width 12 Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Cold-Finished, Annealed, ASTM A276, 7/8″ Thick, 7/8″ Width, 12″ Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Cold-Finished, Annealed, ASTM A276, 7/8″ Thick, 7/8″ Width, 12″ Length - 304 stainless steel is the most commonly used grade of stainless steel due to its combination of corrosion resistance, weldability, and formability. Annealed after shaping to modify the metal’s properties. Meets astm a276 specifications. Unpolished (mill) surface has no finish. Cold finished to the specified dimensions.

 

304 Stainless Steel Angle Unpolished Mill Finish Annealed ASTM A276 Equal Leg Length Rounded Corners 1-12 Leg Lengths 18 Wall Thickness 48 Length

304 Stainless Steel Angle, Unpolished (Mill) Finish, Annealed, ASTM A276, Equal Leg Length, Rounded Corners, 1-1/2″ Leg Lengths, 1/8″ Wall Thickness, 48″ Length

304 Stainless Steel Angle, Unpolished (Mill) Finish, Annealed, ASTM A276, Equal Leg Length, Rounded Corners, 1-1/2″ Leg Lengths, 1/8″ Wall Thickness, 48″ Length - Unpolished (mill) surface has no finish. 304 stainless steel is the most commonly used grade of stainless steel due to its combination of corrosion resistance, weldability, and formability. Meets astm a276 specifications. Standard tolerance. Annealed after shaping to modify the metal’s properties.

 

304 Stainless Steel Hex Bar Unpolished Mill Finish Annealed 0 Annealed Temper Precision Tolerance ASTM A276 58 Across Flats 72 Length

304 Stainless Steel Hex Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, Precision Tolerance, ASTM A276 5/8″ Across Flats, 72″ Length

304 Stainless Steel Hex Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, Precision Tolerance, ASTM A276 5/8″ Across Flats, 72″ Length - Meets astm a276 specifications. Unpolished (mill) surface has no finish. Precision tolerance. Annealed after shaping to modify the metal’s properties. 304 stainless steel is the most commonly used grade of stainless steel due to its combination of corrosion resistance, weldability, and formability.

 

Nitronic 60 Stainless Steel Round Rod Unpolished Mill Finish Annealed ASTM A276ASTM A479AMS 5848 3 Diameter 36 Length

Nitronic 60 Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed, ASTM A276/ASTM A479/AMS 5848, 3″ Diameter, 36″ Length

Nitronic 60 Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed, ASTM A276/ASTM A479/AMS 5848, 3″ Diameter, 36″ Length - Nitronic 60 stainless steel is highly wear and gall resistant in both room and elevated temperatures, and offers general corrosion resistance similar to 304 stainless steel but with greater resistance to localized corrosion when exposed to chloride. Standard tolerance. Annealed after shaping to modify the metal’s properties. Meets astm a276, astm a479, and ams 5848 specifications. Unpolished (mill) surface has no finish.

 

Stainless Steel 304 Annealed Rectangular Bar ASTM A276 0625 Thick 1 Width 36 Length

Stainless Steel 304 Annealed Rectangular Bar, ASTM A276, 0.625″ Thick, 1″ Width, 36″ Length

Stainless Steel 304 Annealed Rectangular Bar, ASTM A276, 0.625″ Thick, 1″ Width, 36″ Length - An austenitic steel that welds and forms well in the annealed condition, annealed stainless steel 304 maintains good corrosion resistance up to 1500 degrees fahrenheit. Annealed stainless steel 304 can be used where corrosion resistance and good mechanical properties are important.

 

304 Stainless Steel Rectangular Bar Unpolished Mill Finish Annealed ASTM A276 1 Thickness 1 Width 48 Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, ASTM A276, 1″ Thickness, 1″ Width, 48″ Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, ASTM A276, 1″ Thickness, 1″ Width, 48″ Length - Annealed after shaping to modify the metal’s properties. Standard tolerance. Meets astm a276 specifications. Unpolished (mill) surface has no finish. 304 stainless steel is the most commonly used grade of stainless steel due to its combination of corrosion resistance, weldability, and formability.

 

304 Stainless Steel Rectangular Bar Unpolished Mill Finish Annealed ASTM A276 1-14 Thick 1-14 Width 12 Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, ASTM A276, 1-1/4″ Thick, 1-1/4″ Width, 12″ Length

304 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, ASTM A276, 1-1/4″ Thick, 1-1/4″ Width, 12″ Length - Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The material is typically nonmagnetic but may become slightly magnetic when cold worked. The 304 stainless steel grade is a general-purpose material that combines corrosion resistance, weldability, and formability, making it the most commonly used grade of stainless steel. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. The material has been annealed to modify its properties after shaping. The 304 stainless steel rectangular bar has an unpolished (mill) surface, has been annealed, and meets american society for testing and materials international astm a276 specifications. An austenitic stainless steel that is one of the 18-8 grades, 304 can be cold worked to increase its hardness and strength while maintaining most of its formability. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. Magnetism characterizes how much the material is repelled by or attracted to a magnet. Formability indicates how easily the material can be permanently shaped. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Martensitic grades can be heat treated.

 

Stainless Steel 316 Rectangular Bar Annealed Temper ASTM A276 1 Thick 4 Width 12 Length

Stainless Steel 316 Rectangular Bar, Annealed Temper, ASTM A276, 1″ Thick, 4″ Width, 12″ Length

Stainless Steel 316 Rectangular Bar, Annealed Temper, ASTM A276, 1″ Thick, 4″ Width, 12″ Length - Standard tolerance. Meets astm a276, astm a479, and ams 5848 specifications. Nitronic 60 stainless steel is highly wear and gall resistant in both room and elevated temperatures, and offers general corrosion resistance similar to 304 stainless steel but with greater resistance to localized corrosion when exposed to chloride. Unpolished (mill) surface has no finish. Annealed after shaping to modify the metal’s properties.

 

410 Stainless Steel Round Rod Unpolished Mill Finish ASTM A276 2000 Diameter 3 Length

410 Stainless Steel Round Rod, Unpolished (Mill) Finish, ASTM A276, 2.000″ Diameter, 3″ Length

410 Stainless Steel Round Rod, Unpolished (Mill) Finish, ASTM A276, 2.000″ Diameter, 3″ Length - The 410 stainless steel round rod has an unpolished (mill) surface, meets american society for testing and materials international astm a276 specifications, and has a standard tolerance. Formability indicates how easily the material can be permanently shaped. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. Magnetism characterizes how much the material is repelled by or attracted to a magnet. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. A martensitic stainless steel, 410 withstands high stress, provides better toughness than 440a stainless steel, and resists the formation of scale that can lead to corrosion at elevated temperatures. Martensitic grades can be heat treated. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. The material is magnetic. The 410 stainless steel grade offers high strength and mild corrosion resistance. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated.

 

316 Stainless Steel Rectangular Bar Unpolished Mill Finish Annealed 0 Annealed Temper ASTM A276 18 Thickness 1 Width 36 Length

316 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, ASTM A276, 1/8″ Thickness, 1″ Width, 36″ Length

316 Stainless Steel Rectangular Bar, Unpolished (Mill) Finish, Annealed, 0 (Annealed) Temper, ASTM A276, 1/8″ Thickness, 1″ Width, 36″ Length - Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Duplex grades are heat treatable and roughly twice as strong as austenitic grades. Stainless steel is an iron alloy with resistance to staining and rusting in many environments where steel would typically degrade. The martensitic class includes some of the hardest and strongest stainless steel grades that also offer mild corrosion resistance, high hardness, and good formability. The austenitic class contains the most formable, weldable, and corrosion-resistant stainless steel grades, but they cannot be heat treated. The chemical composition of each grade creates a grain structure that falls into one of five classes austenitic, duplex, ferritic, martensitic, and precipitation hardening. Magnetism characterizes how much the material is repelled by or attracted to a magnet. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. An austenitic stainless steel, 316 is typically nonmagnetic and can be cold worked to increase its hardness and strength while maintaining most of its formability. The precipitation-hardening (ph) class can be heat treated after fabrication to achieve some of the highest hardness ratings in stainless steel. The duplex class offers high resistance to pitting and chloride stress corrosion cracking. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. The 316 stainless steel grade provides better corrosion resistance than general-purpose 304 stainless steel, especially in marine environments, due to higher nickel content and the addition of molybdenum. The ferritic class contains moderately formable and corrosion-resistant grades compared to other stainless steel classes, but they cannot be heat treated. Formability indicates how easily the material can be permanently shaped. The 316 stainless steel rectangular bar has an unpolished (mill) surface, meets american society for testing and materials international astm a276 specifications, and has a standard tolerance. Martensitic grades can be heat treated. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

 

Nitronic 60 Stainless Steel Round Rod Unpolished Mill Finish Annealed ASTM A276ASTM A479AMS 5848 15 Diameter 36 Length

Nitronic 60 Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed, ASTM A276/ASTM A479/AMS 5848, 1.5″ Diameter, 36″ Length

Nitronic 60 Stainless Steel Round Rod, Unpolished (Mill) Finish, Annealed, ASTM A276/ASTM A479/AMS 5848, 1.5″ Diameter, 36″ Length - Annealed after shaping to modify the metal’s properties. Meets astm a276, astm a479, and ams 5848 specifications. Nitronic 60 stainless steel is highly wear and gall resistant in both room and elevated temperatures, and offers general corrosion resistance similar to 304 stainless steel but with greater resistance to localized corrosion when exposed to chloride. Unpolished (mill) surface has no finish. Standard tolerance.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.