Top 20 Best Ptfe Sheets

 

PTFE Plastic Sheet - 132 Thick x 16 Wide x 16 Long

PTFE Plastic Sheet – 1/32″ Thick x 16″ Wide x 16″ Long

PTFE Plastic Sheet – 1/32″ Thick x 16″ Wide x 16″ Long - Usa sealing’s ptfe is noted for its chemical resistance and performance in extreme temperatures. It also has a slippery surface which makes it an ideal choice for parts that slide and roll, such as bearings and gears.

 

PTFE Virgin Teflon Sheet 332 094 x 24 x 24

PTFE Virgin Teflon Sheet 3/32″ .094″ x 24″ x 24″

PTFE Virgin Teflon Sheet 3/32″ .094″ x 24″ x 24″ - 009″. Polytetrafluoroethylene (ptfe) chemically inert, low coefficient of friction, excellent electrical insulator and wide temperature range -110f (-73c) to +500f (+260c) and is ul 94 vo flame retardant 3-a dairy, fda, reach and rohs compliant, ams 3667, astm d3308, astm d4894, astm d3294, width and length tolerance is +/- 1/8″, thickness tolerance +/-.

 

PTFE Sheet Stock Ultra Pure Virgin PTFE  116 Thick  12 x 24 Sheet

PTFE Sheet Stock (Ultra Pure Virgin PTFE) / 1/16″ Thick / (12″ x 24″ Sheet)

PTFE Sheet Stock (Ultra Pure Virgin PTFE) / 1/16″ Thick / (12″ x 24″ Sheet) -   easily bonded with #rbrs-32 rubber cement for semi-permanent and use #gsi-100 with #pp-50 polyprimer for permanent bonds. Manufactured in the united states.   Product meets fda 21 cfr177. These sheets are manufactured from non-stick virgin ptfe and are used as a top for work benches, industrial gaskets, wear surfaces, drainboards, sinks and shelf liners.   They are non-porous and non-absorbent and therefore will not retain odors.   The surface must be wiped down with the polyprimer.   Temperature rated to -350°f to +500°f. 1550, astmd3308, d3294.

 

Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper 48x16

Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper, 48×16″

Oil Slick Sheet Labratory Grade PTFE Roll Solvent Resistant Alternative to Parchment Paper, 48×16″ - A disposable alternative to parchment paper the slick sheet is a laboratory grade ptfe film slick sheet is 100% resistant to non-polar solvents and rated for direct, long term, solvent exposure slick sheet is an ideal liner for collection vessels and evaporation dishes and has excellent heat transfer up to 500°f. Drip mat for botanical extraction , other uses for slick sheet are packaging for sticky extracts, liner for various extraction apparatus, vacuum chamber inserts, non-stick sleeves for glass on glass joints, use whenever an ultra glossy appearance is desired. Helpful hints feel free to cut, fold, score and re-use the slick sheet however, repeated folding and creasing can wrinkle the surface and impact non-stick performance over time sharp tools are not recommended for use with the slick sheet for a pristine result, inspect your slick sheet for airborne debris before each use do not overheat heat in excess of 500°f may damage the slick sheet.

 

Teflon - PTFE Virgin Plastic Sheet Plate 0125 - 18 x 12 x 24

Teflon – PTFE Virgin Plastic Sheet Plate 0.125″ – 1/8″ x 12″ x 24″

Teflon – PTFE Virgin Plastic Sheet Plate 0.125″ – 1/8″ x 12″ x 24″ - The compressive strength at a certain predetermined compression value is one of the most significant mechanical characteristics of ptfe politef, in a wide range of service temperatures. 125 inch length 12 inches width 24 inches finish smooth product weight 3 lbs. Material ptfe teflon shape rod diameter. Its mechanical properties are low compared to other engineering plastics, but its properties remain at a useful level over a great temperature range (-400° to 500° f). Ptfe, teflon molded virgin sheet. Ptfe politef is one of the most versatile plastic materials known and can be used for applications where other materials can’t be used. 125″x12″x24″ ptfe is high molecular weight polymer composed by carbon and fluorine based on the polymeric chain -cf2=cf2-. This material is a soft, low friction fluoropolymer with outstanding chemical resistance and weathering resistance. Mechanical properties can be improved by adding fillers such as glass fibers, bronze, carbon, and graphite.

 

PTFE Virgin Teflon Sheet 18 125 x 24 x 48

PTFE Virgin Teflon Sheet 1/8″ .125″ x 24″ x 48″

PTFE Virgin Teflon Sheet 1/8″ .125″ x 24″ x 48″ - Polytetrafluoroethylene (ptfe) chemically inert, low coefficient of friction, excellent electrical insulator and wide temperature range -110f (-73c) to +500f (+260c) and is ul 94 vo flame retardant 3-a dairy, fda, reach and rohs compliant, ams 3667, astm d3308, astm d4894, astm d3294, width and length tolerance is +/- 1/8″, thickness tolerance +/-. 012″.

 

Sterling Seal Supply Expanded PTFE Sheet 18 Thick 6 x 6 White 1 sheet

Sterling Seal & Supply Expanded PTFE Sheet, 1/8″ Thick, 6″ x 6″, White (1 sheet)

Sterling Seal & Supply Expanded PTFE Sheet, 1/8″ Thick, 6″ x 6″, White (1 sheet) - Sss 24sh expanded ptfe supplied by sterling seal & supply will seal all aggressive chemicals over the entire 0-14 ph range, except for molten alkali metals and elemental fluorine. Sss 24sh expanded ptfe has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability ptfe is both high impact and tear resistant. Sss 24sh expanded ptfe supplied by sterling seal & supply is suitable for all types of flanges, nearly all media, a wide temperature range and for applications with the toughest demands on purity. 0-14 ph range temperature (minimum -450 f, maximum service 500 f) (short term max 600 f) / pressure vacuum up to 200 bar 2900 psi). Sss 24sh expanded ptfe supplied by sterling seal & supply is particularly recommended for applications in the food and beverage industry where high purity materials are required.

 

PTFE Virgin Teflon Sheet 14 250 x 12 x 48

PTFE Virgin Teflon Sheet 1/4″ .250″ x 12″ x 48″

PTFE Virgin Teflon Sheet 1/4″ .250″ x 12″ x 48″ - Polytetrafluoroethylene (ptfe) chemically inert, low coefficient of friction, excellent electrical insulator and wide temperature range -110f (-73c) to +500f (+260c) and is ul 94 vo flame retardant 3-a dairy, fda, reach and rohs compliant, ams 3667, astm d3308, astm d4894, astm d3294, width and length tolerance is +/- 1/8″, thickness tolerance +/-. 025″.

 

PTFE Teflon Sheets 1 Thick x 6 in Width x 6 in Length

PTFE (Teflon) Sheets, 1″ Thick x 6 in. Width x 6 in. Length

PTFE (Teflon) Sheets, 1″ Thick x 6 in. Width x 6 in. Length - This material shares many of the same properties as other fluoropolymers, but generally withstands higher temperatures than fep and etfe. Depending on their properties, certain plastic grades can be used as alternatives to metal, glass, and ceramic. Plastic refers to a group of synthetic or semi-synthetic materials that have been engineered to achieve specific properties. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Ptfe (teflon) (polytetrafluoroethylene) resists most chemicals, typically withstands high temperatures, and has a low-friction surface that does not bond readily with other materials, giving it a nonstick characteristic. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Impact resistance is the measure of a material’s ability to absorb a shock of energy before breaking. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The most notable characteristics of plastics are its low weight, machinability, corrosion resistance, and typically good thermal and electrical insulating properties. Certain plastic grades also offer optical transparency similar to glass, low-friction or self-lubricating surfaces, and exceptional impact resistance. The opaque white ptfe (teflon) sheet has a standard tolerance. Unlike metal, plastic may experience creep, which is deformation caused by longtime exposure to a constant load.

 

PTFE Virgin Teflon Sheet 132 031 x 24 x 24

PTFE Virgin Teflon Sheet 1/32″ .031″ x 24″ x 24″

PTFE Virgin Teflon Sheet 1/32″ .031″ x 24″ x 24″ - 003″. Polytetrafluoroethylene (ptfe) chemically inert, low coefficient of friction, excellent electrical insulator and wide temperature range -110f (-73c) to +500f (+260c) and is ul 94 vo flame retardant 3-a dairy, fda, reach and rohs compliant, ams 3667, astm d3308, astm d4894, astm d3294, width and length tolerance is +/- 1/8″, thickness tolerance +/-.

 

PTFE Virgin Teflon Sheet 14 250 x 12 x 12

PTFE Virgin Teflon Sheet 1/4″ .250″ x 12″ x 12″

PTFE Virgin Teflon Sheet 1/4″ .250″ x 12″ x 12″ - Polytetrafluoroethylene (ptfe) chemically inert, low coefficient of friction, excellent electrical insulator and wide temperature range -110f (-73c) to +500f (+260c) and is ul 94 vo flame retardant 3-a dairy, fda, reach and rohs compliant, ams 3667, astm d3308, astm d4894, astm d3294, width and length tolerance is +/- 1/8″, thickness tolerance +/-. 025″.

 

PTFE Polytetrafluoroethylene Sheet Opaque White Standard Tolerance AMS 3651C 12 Thickness 12 Width 12 Length

PTFE (Polytetrafluoroethylene) Sheet, Opaque White, Standard Tolerance, AMS 3651C, 1/2″ Thickness, 12″ Width, 12″ Length

PTFE (Polytetrafluoroethylene) Sheet, Opaque White, Standard Tolerance, AMS 3651C, 1/2″ Thickness, 12″ Width, 12″ Length - The most notable characteristics of plastics are its low weight, machinability, corrosion resistance, and typically good thermal and electrical insulating properties. The opaque white ptfe sheet has a standard tolerance and meets sae aerospace material specification ams 3651c. Ptfe (polytetrafluoroethylene) resists most chemicals, typically withstands high temperatures, and has a low-friction surface that does not bond readily with other materials, giving it a nonstick characteristic. Plastic refers to a group of synthetic or semi-synthetic materials that have been engineered to achieve specific properties. Depending on their properties, certain plastic grades can be used as alternatives to metal, glass, and ceramic. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Unlike metal, plastic may experience creep, which is deformation caused by longtime exposure to a constant load. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Impact resistance is the measure of a material’s ability to absorb a shock of energy before breaking. Certain plastic grades also offer optical transparency similar to glass, low-friction or self-lubricating surfaces, and exceptional impact resistance. This material shares many of the same properties as other fluoropolymers, but generally withstands higher temperatures than fep and etfe. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks.

 

PTFE Teflon Sheets 12 Thick x 6 in Width x 6 in Length

PTFE (Teflon) Sheets, 1/2″ Thick x 6 in. Width x 6 in. Length

PTFE (Teflon) Sheets, 1/2″ Thick x 6 in. Width x 6 in. Length - Unlike metal, plastic may experience creep, which is deformation caused by longtime exposure to a constant load. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The most notable characteristics of plastics are its low weight, machinability, corrosion resistance, and typically good thermal and electrical insulating properties. This material shares many of the same properties as other fluoropolymers, but generally withstands higher temperatures than fep and etfe. Certain plastic grades also offer optical transparency similar to glass, low-friction or self-lubricating surfaces, and exceptional impact resistance. Toughness describes the material’s ability to absorb energy before breaking, while hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Depending on their properties, certain plastic grades can be used as alternatives to metal, glass, and ceramic. Plastic refers to a group of synthetic or semi-synthetic materials that have been engineered to achieve specific properties. Impact resistance is the measure of a material’s ability to absorb a shock of energy before breaking. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. The opaque white ptfe (teflon) sheet has a standard tolerance. Ptfe (teflon) (polytetrafluoroethylene) resists most chemicals, typically withstands high temperatures, and has a low-friction surface that does not bond readily with other materials, giving it a nonstick characteristic. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces.

 

Sterling Seal 24SH512x6x4 24SH Expanded PTFE Sheet 05 mm Thick 12 x 6 White Pack of 4

Sterling Seal 24SH.512x6x4 24SH Expanded PTFE Sheet, 0.5 mm Thick, 12″ x 6″, White (Pack of 4)

Sterling Seal 24SH.512x6x4 24SH Expanded PTFE Sheet, 0.5 mm Thick, 12″ x 6″, White (Pack of 4) - 0-14 ph range temperature (minimum -450 f, maximum service 500 f) (short term max 600 f) / pressure vacuum up to 200 bar 2900 psi). Sss 24sh expanded ptfe supplied by sterling seal & supply is particularly recommended for applications in the food and beverage industry where high purity materials are required. Sss 24sh expanded ptfe supplied by sterling seal & supply will seal all aggressive chemicals over the entire 0-14 ph range, except for molten alkali metals and elemental fluorine. Sss 24sh expanded ptfe has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability ptfe is both high impact and tear resistant. Sss 24sh expanded ptfe supplied by sterling seal & supply is suitable for all types of flanges, nearly all media, a wide temperature range and for applications with the toughest demands on purity.

 

FidgetKute New 1pcs 3mm PTFE Sheet Plate White Engineering Plastic 150mmx150mmx3mm

FidgetKute New 1pcs 3mm PTFE Sheet Plate White Engineering Plastic 150mmx150mmx3mm

FidgetKute New 1pcs 3mm PTFE Sheet Plate White Engineering Plastic 150mmx150mmx3mm - Ptfe is unaffected by most corrosive liquids, vapors and gases, and conforms to both fda and ams specifications contact with food, beverages, cosmetic and pharmaceutical products are suitable. Do it your self (diy) material, this product is great for your home and workplace projects sands, drills, cuts with razor or saw & very machine able. Possible applications, arts & crafts projects, designer templates, spacers, bushings, coasters, furniture floor sliders, gasket creation, leveling objects, abrasion resistance, electric insulation. Use ptfe sheet for making seals, washers and insulators ptfe is very useful & durable as a low-friction dry bearing surface and is great as a drum bearing material for dryers. Sterling seal & supply 7530 has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability ptfe is both high impact and tearing resistant.

 

Sterling Seal 24SH512x6x2 24SH Expanded PTFE Sheet 05 mm Thick 12 x 6 White Pack of 2

Sterling Seal 24SH.512x6x2 24SH Expanded PTFE Sheet, 0.5 mm Thick, 12″ x 6″, White (Pack of 2)

Sterling Seal 24SH.512x6x2 24SH Expanded PTFE Sheet, 0.5 mm Thick, 12″ x 6″, White (Pack of 2) - Sss 24sh expanded ptfe supplied by sterling seal & supply is particularly recommended for applications in the food and beverage industry where high purity materials are required. 0-14 ph range temperature (minimum -450 f, maximum service 500 f) (short term max 600 f) / pressure vacuum up to 200 bar 2900 psi). Sss 24sh expanded ptfe has exceptional mechanical toughness with superior anti-stick, low frictional properties, and long term weather ability ptfe is both high impact and tear resistant. Sss 24sh expanded ptfe supplied by sterling seal & supply will seal all aggressive chemicals over the entire 0-14 ph range, except for molten alkali metals and elemental fluorine. Sss 24sh expanded ptfe supplied by sterling seal & supply is suitable for all types of flanges, nearly all media, a wide temperature range and for applications with the toughest demands on purity.

 

Teflon PTFE Film Sheet118 x 3937 Thickness 01mm Teflon Sheet High Temperature Resistant Teflon Coated

Teflon PTFE Film Sheet,11.8 x 39.37″ Thickness 0.1mm Teflon Sheet High Temperature Resistant Teflon Coated

Teflon PTFE Film Sheet,11.8 x 39.37″ Thickness 0.1mm Teflon Sheet High Temperature Resistant Teflon Coated - 【Weather resistant】temperature resistant rate is -196 ℃~250℃,the ptfe sheet protects your working surface while you are doing your heat press transfers projects. 【Reused and eco-friendly】simply put it on the htv and iron, it will resist heat and it is also easy to clean after use due to its non-stickcan be reused after cleaning,eco-friendly. 【corrosion resistance】resistance to most chemicals and solvents, showing inert, strong acid strong base resistance, water and various organic solvents. 【Quantity】 package comes with 1pc 118 x 3937″ thickness 01mm ptfe film sheet plate,and can be cut into proper size for convenient use. 【Excellent electrical performance】the teflon sheet is an ideal grade c insulation material, widely used in defense military industry, atomic energy, oil, radio, electric power machinery, chemical industry and other important sectors.

 

PTFE Teflon Sheet PTFE Film Roll for Heat Press Transfers Craft Heat Resistant Mat 100 Non Stick Protects Iron and Work Area 01mm Thickness×300 mmWidth×1000mmLength White

PTFE Teflon Sheet, PTFE Film Roll for Heat Press Transfers, Craft Heat Resistant Mat, 100% Non Stick Protects Iron and Work Area 0.1mm (Thickness)×300 mm(Width)×1000mm(Length), White

PTFE Teflon Sheet, PTFE Film Roll for Heat Press Transfers, Craft Heat Resistant Mat, 100% Non Stick Protects Iron and Work Area 0.1mm (Thickness)×300 mm(Width)×1000mm(Length), White - High & low temperature resistant — able to be used even if working temperature up to 250 ℃, protect your working surface, perfect for heat press good mechanical toughness, it also can keep 5% elongation even if the temperature drops to -196 ℃. Multi-purpose craft item — in craft, ptfe sheet can serving as barbecue grill mat, nonstick oven liners, iron clothes protector, heat press transfers, paints and other crafting projects, besides, it is widely used in other area such as military, chemical industry, etc. Durable — weather resistant, best aging life in plastic, it can maintain very good mechanical and chemical performance for much longer time compared to other plastic material. High lubrication and reusable — the lowest friction coefficient in solid materials, non, adhesion, is the smallest surface tension in a solid material, easy to clean and trim for convenient use and these craft sheets can be utilized many times both sides, just wipe paint, glue, wax, baking clay and more when finished. Corrosion resistance and insulation — resistant to most chemicals and solvents, showing inert, strong acid strong base resistance, water and various organic solvents besides, it features excellent electrical performance, it is an ideal grade c insulation material.

 

PTFE Plastic Sheet - 316 Thick x 12 Wide x 48 Long

PTFE Plastic Sheet – 3/16″ Thick x 12″ Wide x 48″ Long

PTFE Plastic Sheet – 3/16″ Thick x 12″ Wide x 48″ Long - It also has a slippery surface which makes it an ideal choice for parts that slide and roll, such as bearings and gears. Usa sealing’s ptfe is noted for its chemical resistance and performance in extreme temperatures.

 

PTFE Ultra Pure Virgin PTFE Sheet Stock  18 Thick  12 x 12 Sheet

PTFE (Ultra Pure Virgin PTFE) Sheet Stock / 1/8″ Thick / (12″ x 12″ Sheet)

PTFE (Ultra Pure Virgin PTFE) Sheet Stock / 1/8″ Thick / (12″ x 12″ Sheet) - These sheets are manufactured from non-stick virgin ptfe and are used as a top for work benches, industrial gaskets, wear surfaces, drainboards, sinks and shelf liners. 1550, astmd3308, d3294. Manufactured in the united states.   Easily bonded with #rbrs-32 rubber cement for semi-permanent and use #gsi-100 with #pp-50 polyprimer for permanent bonds.   Product meets fda 21 cfr177.   The surface must be wiped down with the polyprimer.   Temperature rated to -350°f to +500°f.   They are non-porous and non-absorbent and therefore will not retain odors.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.