Top 19 Best Bt 30s

 

Haimer 3064508 Shrink Chuck 8 mm Diameter Extra Short Version BT 30

Haimer 30.645.08 Shrink Chuck, 8 mm Diameter, Extra Short, Version BT 30

Haimer 30.645.08 Shrink Chuck, 8 mm Diameter, Extra Short, Version BT 30 - Precision at3 tolerance shank. Balanced to g25 at 25,000 rpm. All functional surfaces precision ground.

 

BT 30 x ER 16-120 Toolholder

BT 30 x ER 16-120 Toolholder

BT 30 x ER 16-120 Toolholder - I. Collets are available for drilling, milling, coolant thru, and high-speed applications. Special “dna” dead nuts accurate collets are used for small drills (6mm and smaller) to maintain t. Bt 30 x er 16-120 toolholder including powercoat nut. Er collet chucks handle a wide range of machining jobs without having to buy new tool holders. R. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a torque wrench and tightening fixure. At those sizes.

 

Haimer 3064020 Shrink Chuck 20 mm Diameter Short Version BT 30

Haimer 30.640.20 Shrink Chuck, 20 mm Diameter, Short, Version BT 30

Haimer 30.640.20 Shrink Chuck, 20 mm Diameter, Short, Version BT 30 - Balanced to g25 at 25,000 rpm. All functional surfaces precision ground. Precision at3 tolerance shank.

 

BT 30 x ER 40-80 Toolholder

BT 30 x ER 40-80 Toolholder

BT 30 x ER 40-80 Toolholder - Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a torque wrench and tightening fixure. Bt 30 x er 40-80 toolholder including powercoat nut. I. Special “dna” dead nuts accurate collets are used for small drills (6mm and smaller) to maintain t. Er collet chucks handle a wide range of machining jobs without having to buy new tool holders. At those sizes. Collets are available for drilling, milling, coolant thru, and high-speed applications. R.

 

Haimer 3064018 Shrink Chuck 18 mm Diameter Short Version BT 30

Haimer 30.640.18 Shrink Chuck, 18 mm Diameter, Short, Version BT 30

Haimer 30.640.18 Shrink Chuck, 18 mm Diameter, Short, Version BT 30 - Precision at3 tolerance shank. Balanced to g25 at 25,000 rpm. All functional surfaces precision ground.

 

Haimer 3064512 Shrink Chuck 12 mm Diameter Ultra Short Version BT 30

Haimer 30.645.12 Shrink Chuck, 12 mm Diameter, Ultra Short, Version BT 30

Haimer 30.645.12 Shrink Chuck, 12 mm Diameter, Ultra Short, Version BT 30 - Precision at3 tolerance shank. All functional surfaces precision ground. Balanced to g25 at 25,000 rpm.

 

Haimer 3064504 Shrink Chuck 4 mm Diameter Short Version BT 30

Haimer 30.645.04 Shrink Chuck, 4 mm Diameter, Short, Version BT 30

Haimer 30.645.04 Shrink Chuck, 4 mm Diameter, Short, Version BT 30 - Precision at3 tolerance shank. All functional surfaces precision ground. Balanced to g25 at 25,000 rpm.

 

Capri Tools BT-30 Heavy-Duty 30-Inch Bolt Cutter with Chrome-Molybdenum Blades

Capri Tools BT-30 Heavy-Duty 30-Inch Bolt Cutter with Chrome-Molybdenum Blades

Capri Tools BT-30 Heavy-Duty 30-Inch Bolt Cutter with Chrome-Molybdenum Blades - High fulcrum-point design provides incredible leverage to applied force. Features cushion grip handles for comfort and sure grip. This capri tools 30-inch bolt cutter features chrome-moly hardened steel jaws, that is designed to handle for more efficient strength applications. Cuts metal with hardness of up to hrc 42, 3/16-inch diameter and features adjustable blade clearance.

 

3M OhEsd Tr-614N Papr Assembly Std Battery Bt-30 Breath - 1 Each

3M Oh/Esd Tr-614N Papr Assembly Std Battery Bt-30 Breath – 1 Each

3M Oh/Esd Tr-614N Papr Assembly Std Battery Bt-30 Breath – 1 Each - Includes comfortable belt that fits close to the body. Easy to clean and fully submersible. Provides adjustable airflow options. Lightweight respirators have been designed to make breathing and working easier.

 

Greene BT-30 B-Series Height Adjustable Tubular Steel Leg for 30D Tops 355 Height 4 width 30 Length

Greene BT-30 B-Series Height Adjustable Tubular Steel Leg for 30″D Tops, 35.5″ Height, 4″ width, 30″ Length

Greene BT-30 B-Series Height Adjustable Tubular Steel Leg for 30″D Tops, 35.5″ Height, 4″ width, 30″ Length - Greene manufacturing, inc., Adjustable height tubular steel leg, 2” x 14 gauge steel tubing leg, all welded assembly, height adjusts from 27” to 35-1/2” on 1” centers.

 

BT-30 Tool Holder Tightening Fixture with Thumbscrew

BT-30 Tool Holder Tightening Fixture with Thumbscrew

BT-30 Tool Holder Tightening Fixture with Thumbscrew - Uses four #1/4-20 cap head screws for easy mounting to a table or bench. Made in the usa by blue ox solutions (chris laidlaw) holds the tool holder at three places at the top and side of the taper and by the thumb screw for a more stable and secure hold while tightening or loosening a tool. Bt-30 taper holder tool tightening fixture with thumbscrew.

 

Haimer 3064005 Shrink Chuck 5 mm Diameter Short Version BT 30

Haimer 30.640.05 Shrink Chuck, 5 mm Diameter, Short, Version BT 30

Haimer 30.640.05 Shrink Chuck, 5 mm Diameter, Short, Version BT 30 - Precision at3 tolerance shank. All functional surfaces precision ground. Balanced to g25 at 25,000 rpm.

 

Haimer 3064012 Shrink Chuck 12 mm Diameter Short Version BT 30

Haimer 30.640.12 Shrink Chuck, 12 mm Diameter, Short, Version BT 30

Haimer 30.640.12 Shrink Chuck, 12 mm Diameter, Short, Version BT 30 - All functional surfaces precision ground. Precision at3 tolerance shank. Balanced to g25 at 25,000 rpm.

 

Haimer 8096530 Zero Master Analog Sensor with Integrated Taper BT 30

Haimer 80.965.30 Zero Master Analog Sensor with Integrated Taper BT 30

Haimer 80.965.30 Zero Master Analog Sensor with Integrated Taper BT 30 - Measure work piece dimensions. No subtracting indicator tip diameter = no math. 1 short probe tip included w/ sensor. Measure surface flatness. 3-dimensional edge finder locates in x,y and z axis.

 

Vertex Tooling Sheath Rack BT CT and DIN 30 VTTR-BT-30 3405-120

Vertex, Tooling Sheath Rack, BT, CT and DIN 30, VTTR-BT-30, 3405-120

Vertex, Tooling Sheath Rack, BT, CT and DIN 30, VTTR-BT-30, 3405-120 - Vttr-bt-30 | ideal to put all your job tools in one place and take them with you to have it at your hands when you need them, or maybe to move them to the machine at once to load them in the atc carrousel. Vertex, milling, tooling sheath rack, bt, ct & din 30. | Specifications | height 225 mm(8 27/32in) | length 595 mm(23 27/64in) | tooling sheath capacity 8 pcs | weight 3. | Keep your tools organized and clean, an organized and clean shop is equal to a safer working environment and a better place to work, nothing speak better of you to a customer than look at a well organized and clean shop. 8 kg | width 143 mm(5 5/8in) | brand vertex | condition new | country of origin taiwan |. | This rack is good for tool holders with a taper of 30, no matter if it is bt or din.

 

BT 30 x ER 16-90 Toolholder

BT 30 x ER 16-90 Toolholder

BT 30 x ER 16-90 Toolholder - Er collet chucks handle a wide range of machining jobs without having to buy new tool holders. I. R. At those sizes. Bt 30 x er 16-90 toolholder including powercoat nut. Special “dna” dead nuts accurate collets are used for small drills (6mm and smaller) to maintain t. Collets are available for drilling, milling, coolant thru, and high-speed applications. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a torque wrench and tightening fixure.

 

Centaur 1614532 RD 32 BT 30 Collet Chuck with E Nut M12 Retention Knob Threading 70 mm Gage Length BT30 ER32

Centaur 1614532 RD 32 BT 30 Collet Chuck with E Nut, M12 Retention Knob Threading, 70 mm Gage Length, BT30 ER32

Centaur 1614532 RD 32 BT 30 Collet Chuck with E Nut, M12 Retention Knob Threading, 70 mm Gage Length, BT30 ER32 - Centaur offers collet chucks to accept rd/er, rdg/tg, rda/da, rdf/af and rda/da collet styles.

 

BT 30 x ER 16-70 Toolholder

BT 30 x ER 16-70 Toolholder

BT 30 x ER 16-70 Toolholder - Balanced to 25,000 rpm. Er16 and 20 toolders come with hex nut as standard. Taper ground to at3 accuracy or better. Tir 00001″ measured from taper to collet pocket. Powercoat nut is included with each holder techniks certified for accuracy and balance.

 

Haimer 8036530FHN Universal FH 3D Sensor with Integrated Taper BT 30 Neutral Model

Haimer 80.365.30.FHN Universal FH 3D Sensor with Integrated Taper BT 30, Neutral Model

Haimer 80.365.30.FHN Universal FH 3D Sensor with Integrated Taper BT 30, Neutral Model - Measure surface flatness. Measure work piece dimensions. 3-dimensional edge finder locates in x,y and z axis. 1 short probe tip included w/ sensor. No subtracting indicator tip diameter = no math.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.