Top 18 American Drill Bushings

 

American Drill Bushing 23052 Safety Engineered Swivel Hoist Ring Alloy Steel w Black Oxide finish G Thread Size 516-18 800 lbs Working Load Limit 2-2132 Height 1732 Thread Length

American Drill Bushing 23052 Safety Engineered Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 5/16″-18, 800 lbs Working Load Limit, 2-21/32″ Height, 17/32″ Thread Length

American Drill Bushing 23052 Safety Engineered Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 5/16″-18, 800 lbs Working Load Limit, 2-21/32″ Height, 17/32″ Thread Length - Hoist rings are magnetic particle inspected in accordance with astm e 1444. The surface finish is black oxide per mil-dtl-13924b. Adb safety engineered hoist rings are designed with a design factor of five times the rated capacity cased in any lifting direction. They are designed to exceed the following military specifications and astm standards mil-std-1365, general design criteria for handling equipment associated with weapons systems mil-std-209c, slinging and tie down provisions for lifting and tying down military equipment asme b30. The material type c4-4140 used in adb safety engineered hoist ring components conform to the chemical requirements of mil-s-5626, ams-2301, astm a-331, astm a-322. However, the user is reminded that it should not be used to lift loads that exceed the rated capacity. Rings are neat treated to 36-48 rc per mil-h-6875. Cranes, derricts, hosts, hooks, lacks and slings. They are not exposed to any equipment or material known or suspected of having mercury or polychlorinated biphenyls. 26, safety standards for cableways.

 

American Drill Bushing SHR-34214 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring Heavy Duty Style

American Drill Bushing SHR-34214 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring, Heavy Duty Style

American Drill Bushing SHR-34214 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring, Heavy Duty Style - Metric dimensions are shown in millimeters. Metric bolt kits are available as special order. 8mm. This heavy duty style is made from forged one, piece steel. Standard tolerance for inch is +/-. Made from alloy steel (certified heat treatment). 030. The replacement bolt kits are designed exclusively for the corresponding american drill bushing hoist rings listed below. Standard tolerance for metric is +/-0. The replacement bolt kits contain bolt and retaining ring. Please call for price and delivery.

 

All American Type H Head Press Fit Drill Bushing H 516 ID x 12 OD x 34 L DR Made in USA

All American Type H Head Press Fit Drill Bushing, H 5/16 ID x 1/2 OD x 3/4″ L DR Made in USA

All American Type H Head Press Fit Drill Bushing, H 5/16 ID x 1/2 OD x 3/4″ L DR Made in USA - Concentricity is held at 0 to. A blended radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. I. 0003 t. Our standard bushings are made of c1144 and heat treated to rockwell c62-64. 0005 t. I. All of our products are free of conflict materials of any kind and conform to reach. All american drill bushing are made in the usa from steel obtained from a domestic steel foundry. R maximum for id sizes of 1/8 to ½ and 0 to. R max for any other size.

 

American Drill Bushing 23301 Safety Engineered Swivel Hoist Ring Alloy Steel w Black Oxide finish G Thread Size 12-13 2500 lbs Working Load Limit 3-4964 Height 1-116 Thread Length

American Drill Bushing 23301 Safety Engineered Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 1/2″-13, 2500 lbs Working Load Limit, 3-49/64″ Height, 1-1/16″ Thread Length

American Drill Bushing 23301 Safety Engineered Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 1/2″-13, 2500 lbs Working Load Limit, 3-49/64″ Height, 1-1/16″ Thread Length - Cranes, derricts, hosts, hooks, lacks and slings. Hoist rings are magnetic particle inspected in accordance with astm e 1444. However, the user is reminded that it should not be used to lift loads that exceed the rated capacity. 26, safety standards for cableways. Rings are neat treated to 36-48 rc per mil-h-6875. The material type c4-4140 used in adb safety engineered hoist ring components conform to the chemical requirements of mil-s-5626, ams-2301, astm a-331, astm a-322. They are designed to exceed the following military specifications and astm standards mil-std-1365, general design criteria for handling equipment associated with weapons systems mil-std-209c, slinging and tie down provisions for lifting and tying down military equipment asme b30. The surface finish is black oxide per mil-dtl-13924b. Adb safety engineered hoist rings are designed with a design factor of five times the rated capacity cased in any lifting direction. They are not exposed to any equipment or material known or suspected of having mercury or polychlorinated biphenyls.

 

American Drill Bushing SHR-33314 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring Heavy Duty Style

American Drill Bushing SHR-33314 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring, Heavy Duty Style

American Drill Bushing SHR-33314 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring, Heavy Duty Style - The replacement bolt kits contain bolt and retaining ring. Standard tolerance for inch is +/-. Please call for price and delivery. 8mm. 030. Made from alloy steel (certified heat treatment). Standard tolerance for metric is +/-0. Metric bolt kits are available as special order. The replacement bolt kits are designed exclusively for the corresponding american drill bushing hoist rings listed below. Metric dimensions are shown in millimeters. This heavy duty style is made from forged one, piece steel.

 

American Drill Bushing SHR-34314 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring Heavy Duty Style

American Drill Bushing SHR-34314 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring, Heavy Duty Style

American Drill Bushing SHR-34314 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring, Heavy Duty Style - Meets osha standards. Meets military specification no mil-std 1365 (11) or mil-std 209c. Range of movement, 180«m,1[degree]» pivot, 360«m,1[degree]» swivel. Safety factor = 51. 100% magnetic particle inspected.

 

American Drill Bushing 33512 Heavy Duty Swivel Hoist Ring Alloy Steel w Black Oxide finish G Thread Size 12-13 2500 lbs Working Load Limit 5-1964 Height 34 Thread Length

American Drill Bushing 33512 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 1/2″-13, 2500 lbs Working Load Limit, 5-19/64″ Height, 3/4″ Thread Length

American Drill Bushing 33512 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 1/2″-13, 2500 lbs Working Load Limit, 5-19/64″ Height, 3/4″ Thread Length - 26, safety standards for cableways. Adb safety engineered hoist rings are designed with a design factor of five times the rated capacity cased in any lifting direction. Cranes, derricts, hosts, hooks, lacks and slings. However, the user is reminded that it should not be used to lift loads that exceed the rated capacity. Rings are neat treated to 36-48 rc per mil-h-6875. Meets military specification no. They are designed to exceed the following military specifications and astm standards mil-std-1365, general design criteria for handling equipment associated with weapons systems mil-std-209c, slinging and tie down provisions for lifting and tying down military equipment asme b30. Heavy duty hoist rings are specified and used in nuclear energy equipment. The material type c4-4140 used in adb safety engineered hoist ring components conform to the chemical requirements of mil-s-5626, ams-2301, astm a-331, astm a-322. Hoist rings are magnetic particle inspected in accordance with astm e 1444. 26. Mil-std 209, meets ansi/asme b30. The surface finish is black oxide per mil-dtl-13924b. They are not exposed to any equipment or material known or suspected of having mercury or polychlorinated biphenyls.

 

American Drill Bushing 33103 Heavy Duty Swivel Hoist Ring Alloy Steel w Black Oxide finish G Thread Size 34-10 7000 lbs Working Load Limit 7-2364 Height 1-716 Thread Length

American Drill Bushing 33103 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 3/4″-10, 7000 lbs Working Load Limit, 7-23/64″ Height, 1-7/16″ Thread Length

American Drill Bushing 33103 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 3/4″-10, 7000 lbs Working Load Limit, 7-23/64″ Height, 1-7/16″ Thread Length - They are not exposed to any equipment or material known or suspected of having mercury or polychlorinated biphenyls. However, the user is reminded that it should not be used to lift loads that exceed the rated capacity. Adb safety engineered hoist rings are designed with a design factor of five times the rated capacity cased in any lifting direction. 26, safety standards for cableways. Hoist rings are magnetic particle inspected in accordance with astm e 1444. Heavy duty hoist rings are specified and used in nuclear energy equipment. Meets military specification no. 26. They are designed to exceed the following military specifications and astm standards mil-std-1365, general design criteria for handling equipment associated with weapons systems mil-std-209c, slinging and tie down provisions for lifting and tying down military equipment asme b30. Cranes, derricts, hosts, hooks, lacks and slings. The material type c4-4140 used in adb safety engineered hoist ring components conform to the chemical requirements of mil-s-5626, ams-2301, astm a-331, astm a-322. Rings are neat treated to 36-48 rc per mil-h-6875. The surface finish is black oxide per mil-dtl-13924b. Mil-std 209, meets ansi/asme b30.

 

All American Type P Bushing 764 ID x 14 OD x 38 L Drill Bushing C1144 Steel Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P Bushing, 7/64 ID x 1/4 OD x 3/8″ L, Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P Bushing, 7/64 ID x 1/4 OD x 3/8″ L, Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA - All american drill bushing are made in the usa from steel obtained from a domestic steel foundry. All of our products are free of conflict materials of any kind and conform to reach. 0003 t. Our standard bushings are made of c1144 and heat treated to rockwell c62-64. Concentricity is held at 0 to. 0005 t. A blended radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. I. R max for any other size. R maximum for id sizes of 1/8 to ½ and 0 to. I.

 

American Drill Bushing 33314 Heavy Duty Swivel Hoist Ring Alloy Steel w Black Oxide finish G Thread Size 38-16 1000 lbs Working Load Limit 3-732 Height 1-364 Thread Length

American Drill Bushing 33314 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 3/8″-16, 1000 lbs Working Load Limit, 3-7/32″ Height, 1-3/64″ Thread Length

American Drill Bushing 33314 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 3/8″-16, 1000 lbs Working Load Limit, 3-7/32″ Height, 1-3/64″ Thread Length - Mil-std 209, meets ansi/asme b30. Rings are neat treated to 36-48 rc per mil-h-6875. Adb safety engineered hoist rings are designed with a design factor of five times the rated capacity cased in any lifting direction. Cranes, derricts, hosts, hooks, lacks and slings. Hoist rings are magnetic particle inspected in accordance with astm e 1444. 26. 26, safety standards for cableways. Meets military specification no. However, the user is reminded that it should not be used to lift loads that exceed the rated capacity. They are not exposed to any equipment or material known or suspected of having mercury or polychlorinated biphenyls. Heavy duty hoist rings are specified and used in nuclear energy equipment. The material type c4-4140 used in adb safety engineered hoist ring components conform to the chemical requirements of mil-s-5626, ams-2301, astm a-331, astm a-322. The surface finish is black oxide per mil-dtl-13924b. They are designed to exceed the following military specifications and astm standards mil-std-1365, general design criteria for handling equipment associated with weapons systems mil-std-209c, slinging and tie down provisions for lifting and tying down military equipment asme b30.

 

American Drill Bushing 33515 Heavy Duty Swivel Hoist Ring Alloy Steel w Black Oxide finish G Thread Size 12-13 2500 lbs Working Load Limit 5-1964 Height 1 Thread Length

American Drill Bushing 33515 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 1/2″-13, 2500 lbs Working Load Limit, 5-19/64″ Height, 1″ Thread Length

American Drill Bushing 33515 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 1/2″-13, 2500 lbs Working Load Limit, 5-19/64″ Height, 1″ Thread Length - Meets military specification no. Rings are neat treated to 36-48 rc per mil-h-6875. Cranes, derricts, hosts, hooks, lacks and slings. They are designed to exceed the following military specifications and astm standards mil-std-1365, general design criteria for handling equipment associated with weapons systems mil-std-209c, slinging and tie down provisions for lifting and tying down military equipment asme b30. The material type c4-4140 used in adb safety engineered hoist ring components conform to the chemical requirements of mil-s-5626, ams-2301, astm a-331, astm a-322. 26, safety standards for cableways. The surface finish is black oxide per mil-dtl-13924b. 26. However, the user is reminded that it should not be used to lift loads that exceed the rated capacity. Heavy duty hoist rings are specified and used in nuclear energy equipment. Adb safety engineered hoist rings are designed with a design factor of five times the rated capacity cased in any lifting direction. Mil-std 209, meets ansi/asme b30. They are not exposed to any equipment or material known or suspected of having mercury or polychlorinated biphenyls. Hoist rings are magnetic particle inspected in accordance with astm e 1444.

 

American Drill Bushing 33112 Heavy Duty Swivel Hoist Ring Alloy Steel w Black Oxide finish G Thread Size 14-20 550 lbs Working Load Limit 3-732 Height 3564 Thread Length

American Drill Bushing 33112 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 1/4″-20, 550 lbs Working Load Limit, 3-7/32″ Height, 35/64″ Thread Length

American Drill Bushing 33112 Heavy Duty Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 1/4″-20, 550 lbs Working Load Limit, 3-7/32″ Height, 35/64″ Thread Length - 26. They are designed to exceed the following military specifications and astm standards mil-std-1365, general design criteria for handling equipment associated with weapons systems mil-std-209c, slinging and tie down provisions for lifting and tying down military equipment asme b30. However, the user is reminded that it should not be used to lift loads that exceed the rated capacity. Cranes, derricts, hosts, hooks, lacks and slings. Meets military specification no. The surface finish is black oxide per mil-dtl-13924b. Heavy duty hoist rings are specified and used in nuclear energy equipment. Adb safety engineered hoist rings are designed with a design factor of five times the rated capacity cased in any lifting direction. Hoist rings are magnetic particle inspected in accordance with astm e 1444. They are not exposed to any equipment or material known or suspected of having mercury or polychlorinated biphenyls. 26, safety standards for cableways. The material type c4-4140 used in adb safety engineered hoist ring components conform to the chemical requirements of mil-s-5626, ams-2301, astm a-331, astm a-322. Rings are neat treated to 36-48 rc per mil-h-6875. Mil-std 209, meets ansi/asme b30.

 

AMERICAN DRILL BUSHING HRS Shackle Hoist Ring 36540

AMERICAN DRILL BUSHING HRS Shackle Hoist Ring (36540)

AMERICAN DRILL BUSHING HRS Shackle Hoist Ring (36540) - Id tolerance of +0001/0005. Concentricity of 0 to 0003 total indicator reading maximum. Heat treated to rockwell c62 to 64. No counterbored.

 

American Drill Bushing SHR-33516 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring Heavy Duty Style

American Drill Bushing SHR-33516 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring, Heavy Duty Style

American Drill Bushing SHR-33516 Heavy-Duty Swivel Hoist Ring ADB Hoist Ring, Heavy Duty Style - Standard tolerance for inch is +/-. Please call for price and delivery. Metric bolt kits are available as special order. The replacement bolt kits are designed exclusively for the corresponding american drill bushing hoist rings listed below. Made from alloy steel (certified heat treatment). 8mm. 030. This heavy duty style is made from forged one, piece steel. Standard tolerance for metric is +/-0. The replacement bolt kits contain bolt and retaining ring. Metric dimensions are shown in millimeters.

 

American Drill Bushing SHRS-2 Stationary Hoist Ring High-Strength SHCS ADB Hoist Ring High Strength Screw

American Drill Bushing SHRS-2 Stationary Hoist Ring High-Strength SHCS ADB Hoist Ring, High Strength Screw

American Drill Bushing SHRS-2 Stationary Hoist Ring High-Strength SHCS ADB Hoist Ring, High Strength Screw - Never exceed maximum load rating. Heat treated forged alloy steel. The eye pivots 180 degrees and lays flat when not in use. Provides safe handling of heavy equipment and parts. Shr-34045 and shr-34050 have four mounting holes. To meet maximum load capacities, high strength screws must be used. Screws are not included with hoist ring and must be ordered separately. Black oxide finish. Safety factor = 61. Engineered to provide maximum load capacities regardless of pull.

 

American Drill Bushing 33616 Heavy Duty Long Bar Swivel Hoist Ring Alloy Steel w Black Oxide finish G Thread Size 58-11 4000 lbs Working Load Limit 6-5564 Height 1-14 Thread Length

American Drill Bushing 33616 Heavy Duty Long Bar Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 5/8″-11, 4000 lbs Working Load Limit, 6-55/64″ Height, 1-1/4″ Thread Length

American Drill Bushing 33616 Heavy Duty Long Bar Swivel Hoist Ring, Alloy Steel w/ Black Oxide finish, G Thread Size 5/8″-11, 4000 lbs Working Load Limit, 6-55/64″ Height, 1-1/4″ Thread Length - They are designed to exceed the following military specifications and astm standards mil-std-1365, general design criteria for handling equipment associated with weapons systems mil-std-209c, slinging and tie down provisions for lifting and tying down military equipment asme b30. 26. 26, safety standards for cableways. Hoist rings are magnetic particle inspected in accordance with astm e 1444. They are not exposed to any equipment or material known or suspected of having mercury or polychlorinated biphenyls. Adb safety engineered hoist rings are designed with a design factor of five times the rated capacity cased in any lifting direction. Meets military specification no. The surface finish is black oxide per mil-dtl-13924b. Heavy duty hoist rings are specified and used in nuclear energy equipment. Mil-std 209, meets ansi/asme b30. Rings are neat treated to 36-48 rc per mil-h-6875. However, the user is reminded that it should not be used to lift loads that exceed the rated capacity. Cranes, derricts, hosts, hooks, lacks and slings. The material type c4-4140 used in adb safety engineered hoist ring components conform to the chemical requirements of mil-s-5626, ams-2301, astm a-331, astm a-322.

 

AMERICAN DRILL BUSHING Weld Mount Pivot Load 5803025

AMERICAN DRILL BUSHING Weld Mount Pivot Load (5803025)

AMERICAN DRILL BUSHING Weld Mount Pivot Load (5803025) - 61 design factor. Made of forged chrome moly steel with tensile strength of parent material should be above 80000 psi to achieve full load rating. Rings and bodies are magnetic particle inspected per astm 1444. 180 degrees pivot under load. Black oxide finish for corrosion resistance.

 

All American Type P Bushing 58 ID x 1 OD x 1 L Drill Bushing C1144 Steel Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P Bushing, 5/8 ID x 1 OD x 1″ L, Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA

All American Type P Bushing, 5/8 ID x 1 OD x 1″ L, Drill Bushing C1144 Steel, Heat Treated to Rockwell C62 to 64 Made in USA - All american drill bushing are made in the usa from steel obtained from a domestic steel foundry. I. I. R max for any other size. Our standard bushings are made of c1144 and heat treated to rockwell c62-64. A blended radius on the drill entrance improves drill entry and alignment which prevents tool wear and breakage. R maximum for id sizes of 1/8 to ½ and 0 to. Concentricity is held at 0 to. 0005 t. All of our products are free of conflict materials of any kind and conform to reach. 0003 t.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.