Top 15 Tap Collets

 

Techniks 14 ER32 Quick-Change Rigid Tap Collet

Techniks 1/4″ ER32 Quick-Change Rigid Tap Collet

Techniks 1/4″ ER32 Quick-Change Rigid Tap Collet - Reduced clearance requirements. Locking feature prevents spinning the tap. Our part# tec-05808-255. It can alsobe used with an axial compensating tapping head or with a cnc machining center with rigid tapping use techniks �powercoat� nut for extra holding power in the collet pocket. Quick-change taps in seconds.

 

Techniks M11 ER32 Rigid Tap Collet

Techniks M11 ER32 Rigid Tap Collet

Techniks M11 ER32 Rigid Tap Collet - Reduced clearance requirements. Special design locks square in slots. Our part# tec-05600-jis. The special square design locks flat-sided tap shanks into collet, preventing the tap from spinning inside the collet use techniks��power coat��nut for extra holding power in the collet pocket. Replaces expensive tap holders.

 

Lyndex NT05-028 Positive Drive Tap Collet 1 System 716 Tap Size 118 Top Diameter 075 Bottom Diameter

Lyndex NT05-028 Positive Drive Tap Collet, #1 System, 7/16″ Tap Size, 1.18″ Top Diameter, 0.75″ Bottom Diameter

Lyndex NT05-028 Positive Drive Tap Collet, #1 System, 7/16″ Tap Size, 1.18″ Top Diameter, 0.75″ Bottom Diameter - 1. Lyndex positive drive tap collets, us standard. 75-inches bottom diameter. 7/16-inches tap size. 323-inches tap shank. 18-inches top diameter, 0. Standard collets are used for standard and coolant-thru tap holders, maximum 750 psi. #1 system. 242-inches drive square.

 

Techniks 38 ER32 Rigid Tap Collet

Techniks 3/8″ ER32 Rigid Tap Collet

Techniks 3/8″ ER32 Rigid Tap Collet - Our part # tec-05570-381. The special square design locks flat-sided tap shanks into collet, preventing the tap from spinning inside the collet use techniks��power coat��nut for extra holding power in the collet pocket. Reduced clearance requirements. Replaces expensive tap holders. Special design locks square in slots.

 

Lyndex NT05-024 Positive Drive Tap Collet 1 System 38 Tap Size 118 Top Diameter 075 Bottom Diameter

Lyndex NT05-024 Positive Drive Tap Collet, #1 System, 3/8″ Tap Size, 1.18″ Top Diameter, 0.75″ Bottom Diameter

Lyndex NT05-024 Positive Drive Tap Collet, #1 System, 3/8″ Tap Size, 1.18″ Top Diameter, 0.75″ Bottom Diameter - 3/8-inches tap size. 75-inches bottom diameter. Lyndex positive drive tap collets, us standard. 1. 18-inches top diameter, 0. 286-inches drive square. 381-inches tap shank. #1 system. Standard collets are used for standard and coolant-thru tap holders, maximum 750 psi.

 

Lyndex NT10-048 Positive Drive Tap Collet 2 System 34 Tap Size 198 Top Diameter 122 Bottom Diameter

Lyndex NT10-048 Positive Drive Tap Collet, #2 System, 3/4″ Tap Size, 1.98″ Top Diameter, 1.22″ Bottom Diameter

Lyndex NT10-048 Positive Drive Tap Collet, #2 System, 3/4″ Tap Size, 1.98″ Top Diameter, 1.22″ Bottom Diameter - Standard collets are used for standard and coolant-thru tap holders, maximum 750 psi. 98-inches top diameter, 1. 442-inches drive square. #2 system. 3/4-inches tap size. 590-inches tap shank. Lyndex positive drive tap collets, us standard. 1. 22-inches bottom diameter.

 

Lyndex NT05-008 Positive Drive Tap Collet 1 System 8 Tap Size 118 Top Diameter 075 Bottom Diameter

Lyndex NT05-008 Positive Drive Tap Collet, #1 System, #8 Tap Size, 1.18″ Top Diameter, 0.75″ Bottom Diameter

Lyndex NT05-008 Positive Drive Tap Collet, #1 System, #8 Tap Size, 1.18″ Top Diameter, 0.75″ Bottom Diameter - #1 system. 18-inches top diameter, 0. 131-inches drive square. Lyndex positive drive tap collets, us standard. #8 tap size. 75-inches bottom diameter. 168-inches tap shank. 1. Standard collets are used for standard and coolant-thru tap holders, maximum 750 psi.

 

Lyndex-Nikken T05-006 Torque Control Tap Collet 1 System 0-6 Size 0141 Shank Diameter 0110 Drive Square

Lyndex-Nikken T05-006 Torque Control Tap Collet, #1 System, #0-6 Size, 0.141″ Shank Diameter, 0.110″ Drive Square

Lyndex-Nikken T05-006 Torque Control Tap Collet, #1 System, #0-6 Size, 0.141″ Shank Diameter, 0.110″ Drive Square - Standard collets are used for standard and coolant-thru tap holders, maximum 750 psi.

 

Lyndex NT10-032 Positive Drive Tap Collet 2 System 12 Tap Size 198 Top Diameter 122 Bottom Diameter

Lyndex NT10-032 Positive Drive Tap Collet, #2 System, 1/2″ Tap Size, 1.98″ Top Diameter, 1.22″ Bottom Diameter

Lyndex NT10-032 Positive Drive Tap Collet, #2 System, 1/2″ Tap Size, 1.98″ Top Diameter, 1.22″ Bottom Diameter - 98-inches top diameter, 1. 22-inches bottom diameter. 275-inches drive square. 367-inches tap shank. Lyndex positive drive tap collets, us standard. 1. #2 system. Standard collets are used for standard and coolant-thru tap holders, maximum 750 psi. 1/2-inches tap size.

 

Techniks M5M6 ER20 Rigid Tap Collet

Techniks M5/M6 ER20 Rigid Tap Collet

Techniks M5/M6 ER20 Rigid Tap Collet - Special design locks square in slots. Our part # tec-05434-din. Compatible with er, dr, rd, esx, br or din 6499 collet pockets. Replaces expensive tap holders. Reduce tapping clearance requirements.

 

Techniks 8 Pc ER20 Quick-Change Rigid Tap Collet Set

Techniks 8 Pc. ER20 Quick-Change Rigid Tap Collet Set

Techniks 8 Pc. ER20 Quick-Change Rigid Tap Collet Set - Complete set with wood block. Locking feature prevents spinning the tap. Reduced clearance requirements. Quick-change taps in seconds. Out part # tec-05804-8is.

 

Techniks 516 ER32 Quick-Change Tap Collet

Techniks 5/16″ ER32 Quick-Change Tap Collet

Techniks 5/16″ ER32 Quick-Change Tap Collet - Locking feature prevents spinning the tap. Reduced clearance requirements. Our part# tec-05808-318. It can alsobe used with an axial compensating tapping head or with a cnc machining center with rigid tapping use techniks �powercoat� nut for extra holding power in the collet pocket. Quick-change taps in seconds.

 

Pioneer TER20D-040 ER Rigid Tap Collets 3 mm Square

Pioneer TER20D-040 ER Rigid Tap Collets, 3 mm Square

Pioneer TER20D-040 ER Rigid Tap Collets, 3 mm Square - Special design locks tap flats into the collet slots preventing the tap from spinning inside the collet. Din shank and square standard.

 

Techniks 85mm ER16 M8 Rigid Tap Collet

Techniks 8.5mm ER16 M8 Rigid Tap Collet

Techniks 8.5mm ER16 M8 Rigid Tap Collet - The special square design locks flat-sided tap shanks into collet, preventing the tap from spinning inside the collet use techniks��power coat��nut for extra holding power in the collet pocket. Reduced clearance requirements. Our part# tec-05352. Replaces expensive tap holders. Special design locks square in slots.

 

Techniks 532 8 ER32 Quick-Change Rigid Tap Collet

Techniks 5/32″ (#8) ER32 Quick-Change Rigid Tap Collet

Techniks 5/32″ (#8) ER32 Quick-Change Rigid Tap Collet - Reduced clearance requirements. It can alsobe used with an axial compensating tapping head or with a cnc machining center with rigid tapping use techniks �powercoat� nut for extra holding power in the collet pocket. Locking feature prevents spinning the tap. Quick-change taps in seconds. Our part# tec-05808-168.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.