Top 15 Double Angle Collet Chucks

 

WIDIA Erickson NPA238Locknut for DA 08 Double-Angle Collet Chucks DA200 NOSEPIECE ASSYDP FL HL 094 Diameter #ad

WIDIA Erickson NPA238Locknut for DA 08 Double-Angle Collet Chucks, DA200 NOSEPIECE ASSY/DP FL HL, 0.94″ Diameter

WIDIA Erickson NPA238Locknut for DA 08 Double-Angle Collet Chucks, DA200 NOSEPIECE ASSY/DP FL HL, 0.94″ Diameter #ad - For series da 08 double-angle collet chucks. 094″ diameter. Sold in each.

 

WIDIA Erickson BT30DA188060MBT30 Shank Toolholder Double-Angle Collet Chuck 23622 Length DA180 Collet #ad

WIDIA Erickson BT30DA188060MBT30 Shank Toolholder, Double-Angle Collet Chuck, 2.3622″ Length, DA180 Collet

WIDIA Erickson BT30DA188060MBT30 Shank Toolholder, Double-Angle Collet Chuck, 2.3622″ Length, DA180 Collet #ad - Erickson v-flange bt taper tooling is manufactured from premium materials and meets or exceeds the latest jis b 6339 specification and iso-1947 taper accuracy of at3 specification standards. For any applications higher than 18,000 rpm, widia recommends that the complete toolholder assembly (toolholder, retention knobs, collets, hardware, and cutting tools) be balanced as one identity. The bt30 tools are either prebalanced to a high specification or balanced-by-design and will perform effectively up to 18,000 rpm.

 

WIDIA DV40DA204100MDV40 Shank Toolholder Double-Angle Collet Chuck 100 mm Length DA200 Collet #ad

WIDIA DV40DA204100MDV40 Shank Toolholder, Double-Angle Collet Chuck, 100 mm Length, DA200 Collet

WIDIA DV40DA204100MDV40 Shank Toolholder, Double-Angle Collet Chuck, 100 mm Length, DA200 Collet #ad - Da200 collet. Da collet chucks are intended for gripping straight shanks. Clamping range 08mm / 031 inch. Da collet chucks also offer flexibility for drilling. Supplied with locknut and stop screw stop screw coolant caps are available and must be ordered separately.

 

WIDIA DV40DA188150MDV40 Shank Toolholder Double-Angle Collet Chuck 5906 Length DA180 Collet #ad

WIDIA DV40DA188150MDV40 Shank Toolholder, Double-Angle Collet Chuck, 5.906″ Length, DA180 Collet

WIDIA DV40DA188150MDV40 Shank Toolholder, Double-Angle Collet Chuck, 5.906″ Length, DA180 Collet #ad - Dv40 tools are either prebalanced to a high specification or balanced-by-design and will perform effectively up to 15,000 rpm. Erickson v-flange dv taper tooling is manufactured from premium materials and meets or exceeds the latest din 69871 specification and iso-1947 taper accuracy of at3 specification standards. For any applications higher than 15,000 rpm, widia recommends that the complete tool holder assembly (tool holder, retention knobs, collets, hardware, and cutting tools) be balanced as one identity.

 

WIDIA DV50DA188070MDV50 Shank Toolholder Double-Angle Collet Chuck 2756 Length DA180 Collet #ad

WIDIA DV50DA188070MDV50 Shank Toolholder, Double-Angle Collet Chuck, 2.756″ Length, DA180 Collet

WIDIA DV50DA188070MDV50 Shank Toolholder, Double-Angle Collet Chuck, 2.756″ Length, DA180 Collet #ad - The dv50 tools are either prebalanced to a high specification or balanced-by-design and will perform effectively up to 12,000 rpm. Erickson v-flange dv taper tooling is manufactured from premium materials and meets or exceeds the latest din 69871 specification and iso-1947 taper accuracy of at3 specification standards.

 

WIDIA Erickson BT40DA188150MBT40 Shank Toolholder Double-Angle Collet Chuck 5906 Length DA180 Collet #ad

WIDIA Erickson BT40DA188150MBT40 Shank Toolholder, Double-Angle Collet Chuck, 5.906″ Length, DA180 Collet

WIDIA Erickson BT40DA188150MBT40 Shank Toolholder, Double-Angle Collet Chuck, 5.906″ Length, DA180 Collet #ad - The bt40 tools are either prebalanced to a high specification or balanced-by-design and will perform effectively up to 15,000 rpm. Erickson v-flange bt taper tooling is manufactured from premium materials and meets or exceeds the latest jis b 6339 specification and iso-1947 taper accuracy of at3 specification standards.

 

WIDIA Erickson BT40DA208070MBT40 Shank Toolholder Double-Angle Collet Chuck 2756 Length DA200 Collet #ad

WIDIA Erickson BT40DA208070MBT40 Shank Toolholder, Double-Angle Collet Chuck, 2.756″ Length, DA200 Collet

WIDIA Erickson BT40DA208070MBT40 Shank Toolholder, Double-Angle Collet Chuck, 2.756″ Length, DA200 Collet #ad - The bt40 tools are either prebalanced to a high specification or balanced-by-design and will perform effectively up to 15,000 rpm. Erickson v-flange bt taper tooling is manufactured from premium materials and meets or exceeds the latest jis b 6339 specification and iso-1947 taper accuracy of at3 specification standards.

 

WIDIA DV40DA204150MDV40 Shank Toolholder Double-Angle Collet Chuck 150 mm Length DA200 Collet #ad

WIDIA DV40DA204150MDV40 Shank Toolholder, Double-Angle Collet Chuck, 150 mm Length, DA200 Collet

WIDIA DV40DA204150MDV40 Shank Toolholder, Double-Angle Collet Chuck, 150 mm Length, DA200 Collet #ad - Supplied with locknut and stop screw stop screw coolant caps are available and must be ordered separately. Clamping range 08mm / 031 inch. Da collet chucks also offer flexibility for drilling. Da collet chucks are intended for gripping straight shanks. Da200 collet.

 

CAT 40 CT40 CT 40 KENNAMETAL CV40DA188300 TOOL HOLDER DOUBLE ANGLE COLLET CHUCK #ad

CAT 40 CT40 CT 40 KENNAMETAL CV40DA188300 TOOL HOLDER DOUBLE ANGLE COLLET CHUCK

CAT 40 CT40 CT 40 KENNAMETAL CV40DA188300 TOOL HOLDER DOUBLE ANGLE COLLET CHUCK #ad - To avoid destroying the tool holder, never overtighten tool holders or neglect surface damage. Uses da standard straight-bore collets and da non-pullout collets. The da collet system provides a 11 grip advantage. R8 chuck with da collet chuck will accept drills, reamers, boring tools and end milling.

 

WIDIA DV50DA188150MDV50 Shank Toolholder Double-Angle Collet Chuck 5906 Length DA180 Collet #ad

WIDIA DV50DA188150MDV50 Shank Toolholder, Double-Angle Collet Chuck, 5.906″ Length, DA180 Collet

WIDIA DV50DA188150MDV50 Shank Toolholder, Double-Angle Collet Chuck, 5.906″ Length, DA180 Collet #ad - Erickson v-flange dv taper tooling is manufactured from premium materials and meets or exceeds the latest din 69871 specification and iso-1947 taper accuracy of at3 specification standards. The dv50 tools are either prebalanced to a high specification or balanced-by-design and will perform effectively up to 12,000 rpm.

 

Caterpillar V-Flange Double Angle Collet Chucks Bison Series 654 CT50 18 - 34 Range  4 L  154 Hex D #ad

Caterpillar V-Flange Double Angle Collet Chucks (Bison Series 654) CT50 1/8 – 3/4″ Range / 4″ (L) / 1.54 Hex (D)

Caterpillar V-Flange Double Angle Collet Chucks (Bison Series 654) CT50 1/8 – 3/4″ Range / 4″ (L) / 1.54 Hex (D) #ad - I. Made of alloy forged steel for long, durable service life. Produced according to at3 specifications. Through spindle coolant capability. R. Suitable for use with all da180 collets. Hardened to rc 52-56 and ground to ensure maximum accuracy. Draw bar threads cat-40 5/8″, 11 cat-501″, 8. Collet seat taper t. Retention knobs are sold separately.

 

WIDIA Erickson NPA208Locknut for DA 08 Double-Angle Collet Chucks DA200 NOSEPIECE ASSY08HEX #ad

WIDIA Erickson NPA208Locknut for DA 08 Double-Angle Collet Chucks, DA200 NOSEPIECE ASSY/08/HEX

WIDIA Erickson NPA208Locknut for DA 08 Double-Angle Collet Chucks, DA200 NOSEPIECE ASSY/08/HEX #ad - For series da 08 double-angle collet chucks. Nosepiece assembly. Sold in each.

 

WIDIA DV50DA204100MDV50 Shank Toolholder Double-Angle Collet Chuck 100 mm Length DA200 Collet #ad

WIDIA DV50DA204100MDV50 Shank Toolholder, Double-Angle Collet Chuck, 100 mm Length, DA200 Collet

WIDIA DV50DA204100MDV50 Shank Toolholder, Double-Angle Collet Chuck, 100 mm Length, DA200 Collet #ad - Da collet chucks also offer flexibility for drilling. Da collet chucks are intended for gripping straight shanks. Supplied with locknut and stop screw stop screw coolant caps are available and must be ordered separately. Clamping range 08mm / 031 inch. Da200 collet.

 

WIDIA Erickson BT50DA188070MBT50 Shank Toolholder Double-Angle Collet Chuck 2756 Length DA180 Collet #ad

WIDIA Erickson BT50DA188070MBT50 Shank Toolholder, Double-Angle Collet Chuck, 2.756″ Length, DA180 Collet

WIDIA Erickson BT50DA188070MBT50 Shank Toolholder, Double-Angle Collet Chuck, 2.756″ Length, DA180 Collet #ad - The bt50 tools are either prebalanced to a high specification or balanced-by-design and will perform effectively up to 12,000 rpm. Erickson v-flange bt taper tooling is manufactured from premium materials and meets or exceeds the latest jis b 6339 specification and iso-1947 taper accuracy of at3 specification standards.

 

Caterpillar V-Flange Double Angle Collet Chucks Bison Series 654 CT50 18 - 34 Range  6 L  154 Hex D #ad

Caterpillar V-Flange Double Angle Collet Chucks (Bison Series 654) CT50 1/8 – 3/4″ Range / 6″ (L) / 1.54 Hex (D)

Caterpillar V-Flange Double Angle Collet Chucks (Bison Series 654) CT50 1/8 – 3/4″ Range / 6″ (L) / 1.54 Hex (D) #ad - I. Retention knobs are sold separately. Suitable for use with all da180 collets. Through spindle coolant capability. Draw bar threads cat-40 5/8″, 11 cat-501″, 8. Produced according to at3 specifications. Made of alloy forged steel for long, durable service life. Hardened to rc 52-56 and ground to ensure maximum accuracy. R. Collet seat taper t.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.