Top 15 Compression Tube Fittings

 

Beduan 304 Stainless Steel Air Compression Fitting Ferrule 38 Tube OD x 12 NPT Male Straight Adapter Connect with Double Ferrules

Beduan 304 Stainless Steel Air Compression Fitting Ferrule, 3/8″ Tube OD x 1/2″ NPT Male, Straight Adapter Connect with Double Ferrules

Beduan 304 Stainless Steel Air Compression Fitting Ferrule, 3/8″ Tube OD x 1/2″ NPT Male, Straight Adapter Connect with Double Ferrules - Adapter for connecting pipes or fittings of different types. High qunatity this fitting is made of chemically hardened type 309 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel. Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. One side fit connects to tubing and the other side has an npt male connector. Tube od 3/8″ male dia npt1/2″ ferrule mini inner dia 3/8″ body 304 stainless steel.

 

Parker A-Lok 6BLEN6-316 316 Stainless Steel Compression Tube Fitting Cap 38 Tube OD

Parker A-Lok 6BLEN6-316 316 Stainless Steel Compression Tube Fitting, Cap, 3/8″ Tube OD

Parker A-Lok 6BLEN6-316 316 Stainless Steel Compression Tube Fitting, Cap, 3/8″ Tube OD - Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications. Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel. Cap for closing the end of a tube or fitting. For use with stainless steel tubing. Connects to tubing.

 

Anderson Metals 50069 Brass Compression Tube Fitting 90 Degree Elbow 12 Tube OD x 12 NPT Male Pipe

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2″ Tube OD x 1/2″ NPT Male Pipe

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1/2″ Tube OD x 1/2″ NPT Male Pipe - Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts. Primary uses water, gasoline, oil and vacuum lines. Easy to disassemble no flaring tool required. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories.

 

Parker A-Lok 8SC8-316 316 Stainless Steel Compression Tube Fitting Union 12 Tube OD

Parker A-Lok 8SC8-316 316 Stainless Steel Compression Tube Fitting, Union, 1/2″ Tube OD

Parker A-Lok 8SC8-316 316 Stainless Steel Compression Tube Fitting, Union, 1/2″ Tube OD - Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. Fitting connects to tubing on both ends. Union for connecting and disconnecting two pipes more easily than couplings. Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing. Hex nut construction for tighter, leak-free connections.

 

Beduan 304 Stainless Steel Air Compression Tube Fitting 6mm Tube OD x 6mm Tube OD Equal Straight Connect for Tubing Pipe Line Pack of 2

Beduan 304 Stainless Steel Air Compression Tube Fitting, 6mm Tube OD x 6mm Tube OD, Equal Straight Connect for Tubing Pipe Line (Pack of 2)

Beduan 304 Stainless Steel Air Compression Tube Fitting, 6mm Tube OD x 6mm Tube OD, Equal Straight Connect for Tubing Pipe Line (Pack of 2) - 304 stainless steel. Coupler ferrule mini inner dia 6 mm. Adapter for connecting pipes or fittings of different types. Double ferrule fitting reduces possibility of leakage. High qunatity this fitting is made of chemically hardened type 304 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel.

 

Brass Compression Tube Fitting Union 516 OD x 516 OD 5pcs

Brass Compression Tube Fitting, Union, 5/16″ OD x 5/16″ OD, 5pcs

Brass Compression Tube Fitting, Union, 5/16″ OD x 5/16″ OD, 5pcs - Three piece construction, nut, sleeve and body with attached inserteasy to disassemble no flaring tool required. Size 5/16″ tube od x 5/16″ tube od. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Use with copper, brass, aluminum, or plastic tubing -65 degree f to +250 degree f temperature range standard fittings use short nuts. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories.

 

Vis Brass Compression Tube Fitting Union 18 OD x 18 OD Pack of 5

Vis Brass Compression Tube Fitting, Union, 1/8″ OD x 1/8″ OD (Pack of 5)

Vis Brass Compression Tube Fitting, Union, 1/8″ OD x 1/8″ OD (Pack of 5) - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees f. Three piece construction, nut, sleeve and body. Union for connecting and disconnecting two tubes more easily than with a coupling. Compression tube connections on both ends.

 

Legines 316 OD Brass Compression Sleeve Ferrules Tube Fitting 50 pcs

Legines 3/16″ OD Brass Compression Sleeve Ferrules Tube Fitting (50 pcs)

Legines 3/16″ OD Brass Compression Sleeve Ferrules Tube Fitting (50 pcs) - Connects to copper, brass, aluminum, or plastic tubing. Sleeve for a tube compression fitting. No flaring tool required for assembly,these fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Operating temperature range of -65 to +250 degrees f. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

 

Metalwork Metric Nickel Plated Brass Compression Tube Fitting Union Double Sleeve Straight Connector 10mm OD x 10mm OD Pack of 2

Metalwork Metric Nickel Plated Brass Compression Tube Fitting, Union, Double Sleeve Straight Connector (10mm OD x 10mm OD, Pack of 2)

Metalwork Metric Nickel Plated Brass Compression Tube Fitting, Union, Double Sleeve Straight Connector (10mm OD x 10mm OD, Pack of 2) - High pressure resistance, temperature resistance. Three piece construction, nut, sleeve and body with attached insert use with copper, brass, aluminum, or plastic tubing. Seal ability and good repeatability, easy to disassemble no flaring tool required. Installation and maintenance convenient. Safe and reliable, nickel plated brass construction.

 

Parker A-Lok 2MSC2N-B Brass Compression Tube Fitting Adapter 18 Tube OD x 18 NPT Male

Parker A-Lok 2MSC2N-B Brass Compression Tube Fitting, Adapter, 1/8″ Tube OD x 1/8″ NPT Male

Parker A-Lok 2MSC2N-B Brass Compression Tube Fitting, Adapter, 1/8″ Tube OD x 1/8″ NPT Male - Adapter for connecting pipes or fittings of different types. For use with copper pipe and tubing. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Fitting connects to tubing on one end and has an npt male connector on the other.

 

Parker A-Lok 4BC4-B Brass Compression Tube Fitting Bulkhead Union 14 Tube OD

Parker A-Lok 4BC4-B Brass Compression Tube Fitting, Bulkhead Union, 1/4″ Tube OD

Parker A-Lok 4BC4-B Brass Compression Tube Fitting, Bulkhead Union, 1/4″ Tube OD - Compatible with stainless steel, copper, rigid and semi-rigid plastic tubing. Hex nut construction for tighter, leak-free connections. Bulkhead union mounts on a wall or bulkhead to allow connections on either side of barrier. Fitting connects to tubing on either side of a bulkhead. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

 

Parker A-Lok 4FSC4N-316 316 Stainless Steel Compression Tube Fitting Adapter 14 Tube OD x 14 NPT Female

Parker A-Lok 4FSC4N-316 316 Stainless Steel Compression Tube Fitting, Adapter, 1/4″ Tube OD x 1/4″ NPT Female

Parker A-Lok 4FSC4N-316 316 Stainless Steel Compression Tube Fitting, Adapter, 1/4″ Tube OD x 1/4″ NPT Female - Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel. Adapter for connecting pipes or fittings of different types. Fitting connects to tubing on one end and has an npt female connector on the other. Twin ferrule compression fitting for a leak-resistant seal in high-pressure applications. For use with stainless steel pipe and tubing.

 

Parker CPI 6-4 FBZ-SS 316 Stainless Steel Compression Tube Fitting Adapter 38 Tube OD x 14 NPT Male

Parker CPI 6-4 FBZ-SS 316 Stainless Steel Compression Tube Fitting, Adapter, 3/8″ Tube OD x 1/4″ NPT Male

Parker CPI 6-4 FBZ-SS 316 Stainless Steel Compression Tube Fitting, Adapter, 3/8″ Tube OD x 1/4″ NPT Male - Adapter for connecting pipes or fittings of different types. Fitting connects to tubing on one end and has an npt male connector on the other. Single ferrule compression fitting has fewer possible leak paths than twin ferrule fittings. For use with stainless steel pipe and tubing. Chemically hardened type 316 stainless steel for higher strength and greater corrosion resistance than untreated stainless steel.

 

Beduan 304 Stainless Steel Compression Tube Fitting 58 x 58 Tube OD Straight Connect Double-Ferrule Adapter

Beduan 304 Stainless Steel Compression Tube Fitting, 5/8″ x 5/8″ Tube OD, Straight Connect, Double-Ferrule Adapter

Beduan 304 Stainless Steel Compression Tube Fitting, 5/8″ x 5/8″ Tube OD, Straight Connect, Double-Ferrule Adapter - Coupler ferrule mini inner dia 5/8″. 304 stainless steel. High qunatity this fitting is made of chemically hardened type 304 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel. Double ferrule fitting reduces possibility of leakage. Adapter for connecting pipes or fittings of different types.

 

Anderson Metals Brass Compression Tube Fitting Half-Union 58 Flare Tube OD x 38 Male Pipe

Anderson Metals Brass Compression Tube Fitting, Half-Union, 5/8″ Flare Tube O.D. x 3/8″ Male Pipe

Anderson Metals Brass Compression Tube Fitting, Half-Union, 5/8″ Flare Tube O.D. x 3/8″ Male Pipe - Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. 45-degree flare head tube connection on one side and a male npt connection on the other. Half union for connecting and disconnecting two tubes more easily than with a coupling. Resists mechanical pullout for a more secure connection. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Operating temperature range of -65 to +250 degrees f.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.