Coolest 25 Filter Supports

 

Pacific KIT-FILTER SUPPORT

Pacific KIT-FILTER & SUPPORT

Pacific KIT-FILTER & SUPPORT - Mh tt75a. Pacific floor care parts. Primary.

 

Kimble 953755-0000 Vacuum Microfiltration Assembly with Utlra-Ware Fritted Glass Support 47mm Filter Size

Kimble 953755-0000 Vacuum Microfiltration Assembly with Utlra-Ware Fritted Glass Support, 47mm Filter Size

Kimble 953755-0000 Vacuum Microfiltration Assembly with Utlra-Ware Fritted Glass Support, 47mm Filter Size - Required accessories are a side arm filtration flask or filtration manifold, a vacuum source and ¼” id vacuum tubing. Kontes brand filtration assemblies with fritted glass supports are designed as membrane filter supports for vacuum filtration analysis of liquids from particulate or biological contamination. These assemblies are not recommended for producing ultra-clean filtrates since the fritted glass of the filter support base is difficult to clean thoroughly and may contribute contaminates from previous filtrations.

 

Wilmad BP-1826-000 Support Base for All-Glass Filter Apparatus 47 mm Size 4035 Joint

Wilmad BP-1826-000 Support Base for All-Glass Filter Apparatus, 47 mm Size, 40/35 Joint

Wilmad BP-1826-000 Support Base for All-Glass Filter Apparatus, 47 mm Size, 40/35 Joint - Use for hplc mobile phase filtration, analysis of particulate or bacterial contamination, or for general laboratory microfiltration. Note components of 47mm apparatus are interchangeable with the corresponding components of other manufacturer’s items and can be used with filtering manifolds. Choose from 47mm or 90mm microfiltration filterware all-borosilicate glass filter apparatus consisting of a graduated funnel, a standard taper 40/35 glass joint connecting the coarse fritted filter support base to the filter flask, and an aluminum clamp (bp-1753).

 

Lift Intake Filter Support

Lift Intake Filter Support

Lift Intake Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

Wheaton Science Products 419337 Stainless Steel Filter Support Screen for 25 mm Glass Filter Holder Assembly

Wheaton Science Products 419337 Stainless Steel Filter Support Screen for 25 mm Glass Filter Holder Assembly

Wheaton Science Products 419337 Stainless Steel Filter Support Screen for 25 mm Glass Filter Holder Assembly - Wheaton 419337 stainless steel filter support screen for 25mm glass filter holder assembly.

 

Fuel Filter Support

Fuel Filter Support

Fuel Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

Bunn 071760000 Filter Support Basket Sst

Bunn 07176.0000 Filter Support Basket, Sst

Bunn 07176.0000 Filter Support Basket, Sst - Genuine oem replacement part. Use genuine oem parts for safety reliability and performance. Bunn offers profitable, reliable beverage equipment and outstanding post-purchase support wherever customers are served.

 

Filter Support

Filter Support

Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

Lift Intake Filter Support

Lift Intake Filter Support

Lift Intake Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

Oil Cooler Filter Support

Oil Cooler & Filter Support

Oil Cooler & Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

Lift Intake Filter Support

Lift Intake Filter Support

Lift Intake Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

GRINDMASTER CECILWARE PARTS 01300L FILTER SUPPORT RUBBER ESP220V 01300L

GRINDMASTER CECILWARE PARTS 01300L FILTER SUPPORT RUBBER ESP220V (01300L)

GRINDMASTER CECILWARE PARTS 01300L FILTER SUPPORT RUBBER ESP220V (01300L) - 01300l. Filter support rubber esp220v.

 

Oil Filter Support

Oil Filter Support

Oil Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

KOHLER OEM PART 12354-18963 1003 Filter Support Bracket KH-12354-18963 12354-18963

KOHLER OEM PART 12354-18963 1003 Filter Support Bracket KH-12354-18963 12354-18963

KOHLER OEM PART 12354-18963 1003 Filter Support Bracket KH-12354-18963 12354-18963 - Kohler genuine parts are built for the long haul and designed to give you peace of mind. Kohler genuine parts are performance-engineered as part of the engine system. Kohler genuine parts are tested and guaranteed to fit kohler engines. Kohler genuine parts undergo strict quality control to meet kohler standards. This is a kohler genuine part designed specifically for kohler engines.

 

Filter Support Pads Cellulosic 25mm

Filter, Support Pads, Cellulosic, 25mm,

Filter, Support Pads, Cellulosic, 25mm, - Filter, support pads, cellulosic, 25mm, 40. 0m, 100/pk.

 

Filter Support

Filter Support

Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

Fuel Filter Support

Fuel Filter Support

Fuel Filter Support - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

BUNN 7175 Filter Support Basket for Beverage Dispenser

BUNN 7175 Filter Support Basket for Beverage Dispenser

BUNN 7175 Filter Support Basket for Beverage Dispenser - Model &num 7175. This bunn filter support basket is made out of stainless steel and is to be used with bunn sru&solu3 beverage dispensers. Please verify your model and serial number before ordering any replacement part, contact customer service at 1&dash866&dash634&dash8927 for assistance. 0000 581009.

 

Chemglass CG-1959-F200  Series CG-1959 Complete Filter Support Assembly without Filter 200 mm Diameter

Chemglass CG-1959-F200 Series CG-1959 Complete Filter Support Assembly without Filter, 200 mm Diameter

Chemglass CG-1959-F200 Series CG-1959 Complete Filter Support Assembly without Filter, 200 mm Diameter - Chemglass cg-1959-f200 series cg-1959 complete filter support assembly without filter, 200 mm diameter, filter support assemblies for filter reactors. , complete, without filter, 200mm diameter.

 

Frame Filter Support Replaces Bloomfield 8707-4

Frame Filter Support, Replaces Bloomfield 8707-4

Frame Filter Support, Replaces Bloomfield 8707-4 - 08 lb type 1 5/8″ opening part reference info bloomfield 2v70116, 8707-4 star mfg 2v-70116(bloomfield), 2v70116(bloomfield) vollrath 8707-4 model reference info bloomfield models 1016bvm, 8718, 8738, 8783mcd. Specifications outer diameter 5 3/16″, 132 mm material stainless steel weight.

 

GE Whatman 1961-054 Glass Vacuum Membrane Filter Holder with Glass Frit Filter Support and Rubber Stopper Connection 300mL Funnel Capacity Fits 47 Membrane Filters

GE Whatman 1961-054 Glass Vacuum Membrane Filter Holder with Glass Frit Filter Support and Rubber Stopper Connection, 300mL Funnel Capacity, Fits 4.7 Membrane Filters

GE Whatman 1961-054 Glass Vacuum Membrane Filter Holder with Glass Frit Filter Support and Rubber Stopper Connection, 300mL Funnel Capacity, Fits 4.7 Membrane Filters - Material borosilicate glass. Suitable for aqueous and organic solvent filtration. This vacuum type membrane holder is produced from borosilicate glass and is available with a choice of support screen. The funnel seal ensures that the sample does not bypass the membrane and that particulates are retained on the surface of the membrane.

 

Generac - FUEL FILTER SUPPORT - 77470

Generac – FUEL FILTER SUPPORT – 77470

Generac – FUEL FILTER SUPPORT – 77470 - Accessories for biosart 100 monitors. 8707-4. Stainless steel. Wire rack. High quality.

 

Filter Support Spacer

Filter Support Spacer

Filter Support Spacer - Pictures shown are representational only and do not necessarily reflect the actual part you will receive.

 

STAR MFG FILTER SUPPORT FRAME 2V-70116

STAR MFG FILTER SUPPORT FRAME 2V-70116

STAR MFG FILTER SUPPORT FRAME 2V-70116 - Specifications outer diameter 5 3/16″, 132 mm material stainless steel weight. 08 lb type 1 5/8″ opening part reference info bloomfield 2v70116, 8707-4 star mfg 2v-70116(bloomfield), 2v70116(bloomfield) vollrath 8707-4 model reference info bloomfield models 1016bvm, 8718, 8738, 8783mcd.

 

Wilmad BP-1826-090 Support Base for All-Glass Filter Apparatus 90 mm Size 4035 Joint

Wilmad BP-1826-090 Support Base for All-Glass Filter Apparatus, 90 mm Size, 40/35 Joint

Wilmad BP-1826-090 Support Base for All-Glass Filter Apparatus, 90 mm Size, 40/35 Joint - Use for hplc mobile phase filtration, analysis of particulate or bacterial contamination, or for general laboratory microfiltration. Choose from 47mm or 90mm microfiltration filterware all-borosilicate glass filter apparatus consisting of a graduated funnel, a standard taper 40/35 glass joint connecting the coarse fritted filter support base to the filter flask, and an aluminum clamp (bp-1753). Note components of 47mm apparatus are interchangeable with the corresponding components of other manufacturer’s items and can be used with filtering manifolds.