Coolest 24 Rfid Modules

 

PN532 NFC RFID module V3 NFC with Android phone extension of RFID provide Schematic and library

PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library

PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library - Is a remote read-write module of ic card using non-contact uhf technology. Response timeread less than 10ms per 8 bytes,write less than 20ms per byte. Sensitivity-102dbm , at least -98dbm. Effective range 50cm (the come-along rfid tags could be detect within 30cm, actual range would be affect with antenna tag and environment). Support baud rate9600192003840057600115200(bps).

 

HiLetgo NXP PN532 NFC RFID Module V3 Kit Near Field Communication to Smart Phone Android

HiLetgo NXP PN532 NFC RFID Module V3 Kit Near Field Communication to Smart Phone Android

HiLetgo NXP PN532 NFC RFID Module V3 Kit Near Field Communication to Smart Phone Android - This module is built around nxp pn532. You only need 2, the main pn532. Com/jmgjmg/pn532 arduino library for spi and i2c access to the pn532 rfid https//github. Com/techniq/node-pn532 packing included 1 pn532 nfc rfid module 1 nxp pn532 nfc rfid module v3 kit. Nxp pn532 is very popular in nfc area. Important before getting it start, you need to install a few libraries like don’s ndef library, pn532 library(seeed-studio’s version recommanded), both of them you can find on github or at below links arduino library for nfc shield based on nxp pn532 chip https//github. 2. Description 1. Overview near field communication (nfc) is a popular technology in recent years, it’s a set of standards for smart phones and similar devices to establish radio communication with each other by touching them together or bringing them into close proximity. 3. The pn532 is actually a bundle of 4 libraries pn532, pn532_hsu, pn532_i2c and pn532_spi. Various cards could be supported. Read/write rfid card, this module could read and write rfid card. Nfc with andriod phone/smart phones the basic communication stamp with andriod phone (nfc supported) is finished. Currently we could put an url to android phone and let it visit a webpage. The ndef library comes with several great example sketches that should get you going right away. 4. P2p communication, two peer pn532 modules could communicate with each other wirelessly. The hsu is for high speed communication, which you probably won’t need. H and either the i2c or spi depending on how you connect it. Com/adafruit/adafruit-pn532 driver for pn532 nfc chip https//github.

 

Escort Memory HF-0405-232-01 RFID Module

Escort Memory HF-0405-232-01 RFID Module

Escort Memory HF-0405-232-01 RFID Module - Pa692 rfid module. This item is used and in working condition. Accessory. Country of origin, taiwan.

 

ShineBear RC522 1356Mhz RFID Module and Raspberry pi

ShineBear RC522 13.56Mhz RFID Module and Raspberry pi

ShineBear RC522 13.56Mhz RFID Module and Raspberry pi - Kit. Rfid module global (all countries except usa item. Zebra ait.

 

SeeedStudio - 1356Mhz RFID Module - IOSIEC 14443 Type a - DIY Maker Open Source BOOOLE

SeeedStudio – 13.56Mhz RFID Module – IOS/IEC 14443 Type a – DIY Maker Open Source BOOOLE

SeeedStudio – 13.56Mhz RFID Module – IOS/IEC 14443 Type a – DIY Maker Open Source BOOOLE - 0019. 56mhz rfid module is an rfid reader capable support iso14443a, mifare series card over a serial line. 70 mm, wire80mm. 2072. The seeedstudio 13. Interface: ttl electrical level working temperature: -10 degree to 70 degree storage temperature: -20 degree to 80 degree board size: 39. 009. 00 mm(dip28) antenna size:54. It can easely be attached to an arduino to have rfid fun.

 

RFID module RF IC MFRC-522 RC522 Kits S50 1356 Mhz 6cm With Tags SPI Write Read for arduino uno 2560 Development Board DIY

RFID module RF IC MFRC-522 RC522 Kits S50 13.56 Mhz 6cm With Tags SPI Write & Read for arduino uno 2560 Development Board DIY

RFID module RF IC MFRC-522 RC522 Kits S50 13.56 Mhz 6cm With Tags SPI Write & Read for arduino uno 2560 Development Board DIY - Our arduino library currently only supports reading/writing tags. Rfid module rf ic mfrc-522 rc522 kits s50 1356 mhz 6cm with tags spi write & read for arduino uno 2560 development board diy. It can also work with any other nfc/rfid type 1 thru 4 tag (and of course all the other nxp mifare type tags). This shield is designed to use i2c or spi communication protocols, spi is the default. This chipset is very powerful, and can pretty much do read and write to tags and cards.

 

SeeedStudio - 125Khz RFID Module - UART TTL Interface EM4100 LED Buzzer - DIY Maker Open Source BOOOLE

SeeedStudio – 125Khz RFID Module – UART TTL Interface EM4100 LED Buzzer – DIY Maker Open Source BOOOLE

SeeedStudio – 125Khz RFID Module – UART TTL Interface EM4100 LED Buzzer – DIY Maker Open Source BOOOLE - 4) any issue please feel free to contact us by amazon message, boooletech(at)yahoocom, or visit booolecom for more information. 3) please kindly give us a chance,you are ensured the best experience of buying from us. 2) we are newcomer on amazon,but we are seasoned on open source hardware. 1) booole inc researches and develops electronic products and open source hardware with the aim of promoting maker space and diy practice it makes you believe innovation and invention are no more exclusive to scientific research institutes.

 

Dovewill Field Communication PN532 NFC RFID Module V3 Kit for Arduino 404x427mm

Dovewill Field Communication PN532 NFC RFID Module V3 Kit for Arduino 40.4×42.7mm

Dovewill Field Communication PN532 NFC RFID Module V3 Kit for Arduino 40.4×42.7mm - Gilt pcb and small dimension and easy to embed into your project. Support rfid reading and writing. Supportp2p communication with peers. Support i2c、spi and hsu (high speed uart), change between those modes. Support nfc with android phone.

 

AuBreey 5sets PN532 NFC RFID module V3 NFC with Android phone extension of RFID provide Schematic and library

AuBreey 5sets PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library

AuBreey 5sets PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library - Is a remote read-write module of ic card using non-contact uhf technology. Response timeread less than 10ms per 8 bytes,write less than 20ms per byte. Sensitivity-102dbm , at least -98dbm. Support baud rate9600192003840057600115200(bps). Effective range 50cm (the come-along rfid tags could be detect within 30cm, actual range would be affect with antenna tag and environment).

 

PN532 NFC RFID module V3 NFC with Android phone extension of RFID provide Schematic and library

PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library

PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library - Sensitivity-102dbm , at least -98dbm. Response timeread less than 10ms per 8 bytes,write less than 20ms per byte. Effective range 50cm (the come-along rfid tags could be detect within 30cm, actual range would be affect with antenna tag and environment). Is a remote read-write module of ic card using non-contact uhf technology. Support baud rate9600192003840057600115200(bps).

 

PN532 NFC RFID module V3 NFC with Android phone extension of RFID provide Schematic and library

PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library

PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library - Sensitivity-102dbm , at least -98dbm. Effective range 50cm (the come-along rfid tags could be detect within 30cm, actual range would be affect with antenna tag and environment). Support baud rate9600192003840057600115200(bps). Is a remote read-write module of ic card using non-contact uhf technology. Response timeread less than 10ms per 8 bytes,write less than 20ms per byte.

 

SenMod 10Mbit s SPI Rate Welded Bend Pin MFRC522 RFID Radio Module RC522 IC Card with S50 Fudan Card

SenMod 10Mbit /s SPI Rate Welded Bend Pin MFRC522 RFID Radio Module RC522 IC Card with S50 Fudan Card

SenMod 10Mbit /s SPI Rate Welded Bend Pin MFRC522 RFID Radio Module RC522 IC Card with S50 Fudan Card - 56mhz passive contactless communication methods and protocols. Mfrc522 support mifare series of high-speed non-contact communication, two-way data transmission rate up to 424kbit/s. In addition, support rapid crypto1 encryption algorithm, terminology validation mifare products. 3v, through the spi interface simple few lines directly with any user cpu motherboard connected communication can ensure that the module is stable and reliable work, distance card reader electrical parameters sleep current. Utilizes a voltage of 3. The mf rc522 use of advanced modulation and demodulation concept completely integrated in all types of 13. Description rc522 chip mf rc522 is applied to the highly integrated read and write 13. This module can be directly loaded into the various reader molds. Rfid module the mf522-an module the the original philips mfrc522 chip design circuit card reader, and applies to the user equipment development, the reader and the development of advanced applications, the need for the user rf card terminal design/production. The digital part of to handle the iso14443a frames and error detection. 14443a compatible transponder signals. 56mhz contactless communication card chip, non-contact card chip to read and write, smart meters and portable handheld devices developed better choice.

 

SuperiParts Smart Electronics RFID module RC522 Kits S50 1356 Mhz 6cm With Tags SPI Write Read for arduino Compatible with UNO MEGA 2560

SuperiParts Smart Electronics RFID module RC522 Kits S50 13.56 Mhz 6cm With Tags SPI Write & Read for arduino Compatible with UNO MEGA 2560

SuperiParts Smart Electronics RFID module RC522 Kits S50 13.56 Mhz 6cm With Tags SPI Write & Read for arduino Compatible with UNO MEGA 2560 - Superiparts smart electronics 2 channel 5v dc relay module solid state low level ssr avr dsp for arduino diy kitpackage includeplease refer to the picture and the product title.

 

MonkeyJack PN532 NFC RFID Module V3 Kit Reader Writer Extension Support for Arduino

MonkeyJack PN532 NFC RFID Module V3 Kit Reader Writer Extension Support for Arduino

MonkeyJack PN532 NFC RFID Module V3 Kit Reader Writer Extension Support for Arduino - Support nfc with android phone. Support i2c、spi and hsu (high speed uart), change between those modes. Gilt pcb and small dimension and easy to embed into your project. Supportp2p communication with peers. Support rfid reading and writing.

 

SeeedStudio - Mini 125Khz RFID Module - Pre-Soldered Antenna 35mm Reading Distance - DIY Maker Open Source BOOOLE

SeeedStudio – Mini 125Khz RFID Module – Pre-Soldered Antenna (35mm Reading Distance) – DIY Maker Open Source BOOOLE

SeeedStudio – Mini 125Khz RFID Module – Pre-Soldered Antenna (35mm Reading Distance) – DIY Maker Open Source BOOOLE - Features, small outline design- pre-soldered mini antenna- uart ttl interface- maximum effective distance up to 35mm- support em4100 compatible read only or read/write tagsspecification, working frequency 125khz- baud rate 9600- interface ttl or wiegand26- working voltage dc 3. 35mm- working temperature -10¡æ to +70¡æ- storage temperature -20¡æ to +80¡æ- humidity 0%, 95%- antenna diameter 15mm- antenna inductance 388uh- pcba dimension 18 x 13 x 3. 7mm- software- source code at github. It will notify whenever 125khz tag approaches, the tag serial number will be send via tx pin or wiegand pin. This rfid module is designed for reading code from 125khz card compatible read-only tags and read/write card. 3v, 5v- working current 19ma, 25ma- reading distance max. Super small size design, it is widely applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.

 

supershineTM RFID module RC522 Kits S50 1356 Mhz 6cm With Tags SPI Write Read for arduino uno 2560

supershine(TM) RFID module RC522 Kits S50 13.56 Mhz 6cm With Tags SPI Write & Read for arduino uno 2560

supershine(TM) RFID module RC522 Kits S50 13.56 Mhz 6cm With Tags SPI Write & Read for arduino uno 2560 - Product description rfid module rc522 kits s50 13. 56 mhz 6cm with tags spi write & read for arduino uno 2560.

 

In ZIYUN Tessel RFID ModuleInduction cardIdentification cardUsed for custom interaction

In ZIYUN Tessel RFID Module,Induction card,Identification card,Used for custom interaction

In ZIYUN Tessel RFID Module,Induction card,Identification card,Used for custom interaction - 56 mhz support charliecards, clippercards, and other metropolitan cards comes with an rfid card technical details dimensions 110mm 75mm 5. 3mm weight g. W 28g battery exclude pack list tessel rfid module1. Have your pet door automatically open when their rfid-tagged collar approaches, or connect to the unique ids of your and your friends’ public transit cards for customized interactions features 13.

 

AuBreey PN532 NFC RFID module V3 NFC with Android phone extension of RFID provide Schematic and library

AuBreey PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library

AuBreey PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library - 54mm spacing 4pin cable   1   mifare one s50 white card   1   mifare one s50 key card   1   12p bended male pins   1   . We’ve taken our popular pn532 breakout board and turned it into a shield, the perfect tool for any 13. This chipset is very powerful, and can pretty much do it all, such as read and write to tags and cards, communicate with phones (say for payment processing), and ‘act’ like a nfc tag. 56mhz rfid or nfc application. Various cards could be supported. While the controller has many capabilities items    quantity   pn532 nfc rfid module   1   2. The mini nfc shield uses the pn532 chip-set (the most popular nfc chip on the market) and is what is embedded in pretty much every phone or device that does nfc. Schematic diagram and datasheet are available as basic function, this module could read and write rfid card.

 

1PCS Serial port RFID module compatible send card and reference code

1PCS Serial port RFID module, compatible, send card and reference code

1PCS Serial port RFID module, compatible, send card and reference code - With the module with the hair, there is a line, two white card, there is a key cardfull serial control, powerful, ic card can write to read, it is suitable for playing , you do not have to control how rfid work, need to configure what, you only need to follow our simple order, you can get the desired resultsinstructions for use via the internet, as well as test instructions and code. If you need more details,please contact us.

 

Makerfocus MFRC522 RFID Module

Makerfocus MFRC522 RFID Module

Makerfocus MFRC522 RFID Module - How to use this module pls refer to this instruction video https//wwwyoutubecom/resultssearch_query=mfrc522+rfid+module. It is an contactless reader module based on the mfrc522 from nxp bv communication via serial makes it simple and easy-usingmfrc522 ic working voltage of 33v, the power to the module, do not mistake the input voltage. Operating distance in read/write mode up to 40 mmfifo buffer handles 64 byte send and receive. Support iso/iec 14443 a/mifaresupport mifare1 s50、mifare1 s70、mifare ultralight、mifare pro、mifare desfire. This module could be used in a variety of applications access management, tracking goods, tracking persons and animals, toll collection and contactless payment, machine readable travel documents, smartdust (for massively distributed sensor networks), tracking sports memorabilia to verify authenticity, airport baggage tracking logistics and etc.

 

SeeedStudio - Mini 125Khz RFID Module - External LEDBuzzer Port 70mm Reading Distance M

SeeedStudio – Mini 125Khz RFID Module – External LED/Buzzer Port (70mm Reading Distance) M

SeeedStudio – Mini 125Khz RFID Module – External LED/Buzzer Port (70mm Reading Distance) M - This rfid module is designed for reading code from 125khz card compatible read-only tags and read/write card. Featuressmall outline designpre-soldered antennauart ttl interfacemaximum effective distance up to 70mmsupport em4100 compatible read only or read/write tagsspecificationworking frequency 125khzbaud rate 9600interface ttl or wiegand26working voltage dc 3. Super small size design, it is widely applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. 3v, 5vworking current 19ma, 25mareading distance max. It will notify whenever 125khz tag approaches, the tag serial number will be send via tx pin or wiegand pin. 70mmworking temperature -10¡æ to +70¡æstorage temperature -20¡æ to +80¡æhumidity 0%, 95%antenna dimension 60 x 35 x 2. 7mmsoftware source code at github. 5mmantenna inductance 388uhpcba dimension 18 x 13 x 3.

 

SeeedStudio - Mini 125Khz RFID Module Presoldered Antenna 70mm Reading Distance

SeeedStudio – Mini 125Khz RFID Module Presoldered Antenna 70mm Reading Distance

SeeedStudio – Mini 125Khz RFID Module Presoldered Antenna 70mm Reading Distance - Gilt pcb and small dimension and easy to embed into your project. Support nfc with android phone. Support i2c、spi and hsu (high speed uart), change between those modes. Support rfid reading and writing. Supportp2p communication with peers.

 

PN532 NFC RFID module V3 NFC with Android phone extension of RFID provide Schematic and library

PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library

PN532 NFC RFID module V3, NFC with Android phone extension of RFID provide Schematic and library - Response timeread less than 10ms per 8 bytes,write less than 20ms per byte. Effective range 50cm (the come-along rfid tags could be detect within 30cm, actual range would be affect with antenna tag and environment). Sensitivity-102dbm , at least -98dbm. Is a remote read-write module of ic card using non-contact uhf technology. Support baud rate9600192003840057600115200(bps).

 

STMICROELECTRONICS STEVAL-TDR027V1 DEMO BOARD PD84008L-E 512MHZ RFID MODULE

STMICROELECTRONICS STEVAL-TDR027V1 DEMO BOARD, PD84008L-E 512MHZ RFID MODULE

STMICROELECTRONICS STEVAL-TDR027V1 DEMO BOARD, PD84008L-E 512MHZ RFID MODULE - Accessory. Pa692 rfid module. Country of origin, taiwan. Price for each silicon core number pd84008l-e kit application type wireless connectivity application sub type rfid core architecture (not available) core sub-architecture (not available).





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.