Coolest 21 Fitting Sanitaries

 

Charlotte Pipe 1-12 Sanitary Tee Pipe Fitting - Schedule 40 PVC DWV Drain Waste and Vent Durable Easy to Install High Tensile and Sound Deadening for Home or Industrial Use Single Unit

Charlotte Pipe 1-1/2″ Sanitary Tee Pipe Fitting – Schedule 40 PVC DWV (Drain, Waste and Vent) Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit)

Charlotte Pipe 1-1/2″ Sanitary Tee Pipe Fitting – Schedule 40 PVC DWV (Drain, Waste and Vent) Durable, Easy to Install, High Tensile and Sound Deadening for Home or Industrial Use (Single Unit) - Not for pressure use they are used in gravity-fed waste elimination systems and are for non-pressure systems where temperatures will not exceed 140° f. Made in the usa for over a century, charlotte pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working americans all of our products are proudly made in the usa. Drain, waste, vent poly vinyl chloride (pvc) white pipe and fittings are used in sanitary drain, waste, and vent (dwv), sewer and storm drainage applications. Charlotte pipe pvc it is non-toxic and meets the most stringent standards in the industry nsf standard 14 astm d 1784 & astm d 2665 & astm d 3311. Easy to install pvc is lightweight, they require no special tools for cutting, and can be installed with solvent cementing, threading, flanging, and roll-grooved joining.

 

HONGLU Sanitary Female Threaded Pipe Fitting to 15 Inch TRI CLAMP OD 505mm Ferrule Pipe Size 12 NPT SUS 304

HONGLU Sanitary Female Threaded Pipe Fitting to 1.5 Inch TRI CLAMP (OD 50.5mm Ferrule) (Pipe Size: 1/2″ NPT) SUS 304

HONGLU Sanitary Female Threaded Pipe Fitting to 1.5 Inch TRI CLAMP (OD 50.5mm Ferrule) (Pipe Size: 1/2″ NPT) SUS 304 - Female threaded fitting fits to 15”tri clamp, clover, sanitary fitting two fittings are clamped together with a high temp silicone gasket in between. Sanitary fittings are used in the food, beverage, biotech, pharmaceutical, and other sanitary process industries. Ferrule size 505mm, fits 15″ tri-clamp, with 1/2″ npt female thread. High and low temperature resistance available for full range of liquids and gas, water, air and some corrosive liquid, high quality,advanced processand precision casting. Sanitary pipe fitting material high quality 304 stainless steel, oxidation resistance and does not corrode.

 

Spears P416 Series PVC DWV Pipe Fitting Sanitary Tee with Left Side Inlet 3 x 3 x 3 x 1-12 Hub

Spears P416 Series PVC DWV Pipe Fitting, Sanitary Tee with Left Side Inlet, 3″ x 3″ x 3″ x 1-1/2″ Hub

Spears P416 Series PVC DWV Pipe Fitting, Sanitary Tee with Left Side Inlet, 3″ x 3″ x 3″ x 1-1/2″ Hub - Complies with astm d2665 and astm d3311 and certified to nsf/ansi international standard 14 (nsf-dwv) and nsf international uniform plumbing code (nsf-up code). Pvc for corrosion resistance, high strength, and less weight than fittings made from metal. Operating temperature range of 73 to 140 degrees f (23 to 60 degrees c). Hub ends for connecting to male unthreaded pipes or fittings. Sanitary tee with four ends for connecting and branching three pipes with a left side inlet.

 

DERNORD Stainless Steel 304 Sanitary Fitting Long Weld Clamp Ferrule Fits Tri Clamp 2 Tube Outer Diameter

DERNORD Stainless Steel 304 Sanitary Fitting, Long Weld Clamp Ferrule Fits Tri Clamp 2″ Tube Outer Diameter

DERNORD Stainless Steel 304 Sanitary Fitting, Long Weld Clamp Ferrule Fits Tri Clamp 2″ Tube Outer Diameter - Pipe / tube od 51mm / 2″ ferrule od (flanged od) 64mm / 25″. Attaches to a fitting to help provide a leak-resistant seal on a tube or hose. Stainless steel 304 for resistance to corrosion and high temperatures. Ferrule fitting for providing a seal when compressed between two mating components. Total height 21mm / 083″ pipe / tube id 48mm / 19″.

 

Hyuduo Stainless Steel Weld Ferrule Clamp Sanitary Pipe Fittings 102mm 4inch End Cap Weld Ferrule Clamp Gasket

Hyuduo Stainless Steel Weld Ferrule Clamp Sanitary Pipe Fittings 102mm 4inch End Cap Weld Ferrule Clamp +Gasket

Hyuduo Stainless Steel Weld Ferrule Clamp Sanitary Pipe Fittings 102mm 4inch End Cap Weld Ferrule Clamp +Gasket - Quick-fit clamp connection, quick connection, easy installation, and bring convenience to the project. Good stability,easy to install, resistance to large temperature difference, and corrosion resistance mainly used in beer, pharmacy, dairy, food, beverage, daily chemical, machinery manufacturers and health large engineering fields. We strive to provide you with the highest quality product and the best customer experience, if you’re not entirely satisfied, please just feel free to contact us at any time. It is made of high quality stainless steel, sanitary,rust and corrosion resistantand with long service life. This product contains 1 pcs 102mm 4 end cap, 1pcs weld ferrule1 pcs clamp and 1 pcs silicone gasket,complete accessories to meet your needs.

 

Dixon B23BMP-G150 Stainless Steel 304 Sanitary Fitting Thermometer Cap 1-12 Tube OD x 34 NPT Female

Dixon B23BMP-G150 Stainless Steel 304 Sanitary Fitting, Thermometer Cap, 1-1/2″ Tube OD x 3/4″ NPT Female

Dixon B23BMP-G150 Stainless Steel 304 Sanitary Fitting, Thermometer Cap, 1-1/2″ Tube OD x 3/4″ NPT Female - Stainless steel 304 for resistance to corrosion and high temperatures. Clamp end connection for a non-permanent seal, providing access to lines. Maximum operating pressure rating of 250 psi at 70 degrees f ambient temperature. Cap for closing the end of a pipe or tube with a female npt opening for a thermometer (not included).

 

DERNORD Sanitary Fitting Reducer Fitting SUS304 Tri Clamp Ferrule Style 3 Tube OD to 2 Tube OD

DERNORD Sanitary Fitting Reducer Fitting SUS304 Tri Clamp Ferrule Style 3″ Tube OD to 2″ Tube OD

DERNORD Sanitary Fitting Reducer Fitting SUS304 Tri Clamp Ferrule Style 3″ Tube OD to 2″ Tube OD - Stainless steel 304 for resistance to corrosion and high temperatures. Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access. Concentric reducer fitting to connect two pipes of different diameters that are along the same pipe axis. Ferrule size(51mm end)64mm ferrule fits 2″ tri clamp. Ferrule size(76mm end)91mm ferrule fits 3″ tri clamp.

 

Dixon F32G-2656 Stainless Steel 304 Holedall Fitting Sanitary Crimp Ferrule 2-3864 to 2-4164 Hose OD 2 Hose ID

Dixon F32G-2656 Stainless Steel 304 Holedall Fitting, Sanitary Crimp Ferrule, 2-38/64″ to 2-41/64″ Hose OD, 2″ Hose ID

Dixon F32G-2656 Stainless Steel 304 Holedall Fitting, Sanitary Crimp Ferrule, 2-38/64″ to 2-41/64″ Hose OD, 2″ Hose ID - Use with dixon holedall fittings only. Attaches to a fitting to help provide a leak-resistant seal on a tube or hose. Maximum operating pressure rating of 250 psi at 70 degrees f ambient temperature. Stainless steel 304 for resistance to corrosion and high temperatures. Ferrule fitting for providing a seal when compressed between two mating components.

 

DERNORD Sanitary End Cap fits Tri-Clamp Ferrule Flange Stainless Steel 304 Fitting Clamp 2 51mm Tube OD 5 Pack

DERNORD Sanitary End Cap fits Tri-Clamp Ferrule Flange Stainless Steel 304 Fitting Clamp (2″ (51mm) Tube OD) (5 Pack)

DERNORD Sanitary End Cap fits Tri-Clamp Ferrule Flange Stainless Steel 304 Fitting Clamp (2″ (51mm) Tube OD) (5 Pack) - Fits end pipe from diameter 51 down to diameter 45, fits 2″ tri-clamp. Maximum operating pressure rating of 250 psi at 70 degrees f ambient temperature. End cap for closing the end of a pipe or tube. Stainless steel 304 for resistance to corrosion and high temperatures. Clamp end connection for a non-permanent seal, providing access to lines.

 

Dixon B2S-R150P Stainless Steel 316L Sanitary Fitting 90 Degree Polished Weld Long Elbow with Tangent 1-12 Tube OD

Dixon B2S-R150P Stainless Steel 316L Sanitary Fitting, 90 Degree Polished Weld Long Elbow with Tangent, 1-1/2″ Tube OD

Dixon B2S-R150P Stainless Steel 316L Sanitary Fitting, 90 Degree Polished Weld Long Elbow with Tangent, 1-1/2″ Tube OD - Sanitary fitting. Made of stainless steel 316l. 90 degree polished weld long elbow with tangent. 1-1/2″ tube od x 1-1/2″ tube od. 065″ nominal wall thickness.

 

DERNORD 2 Pcs Sanitary Male Threaded Ferrule Pipe Fittings  SUS304 Tri-clamp Tri-Clover Clamp  Viton Gasket Male Threaded Pipe Size12 Inch DN15

DERNORD 2 Pcs Sanitary Male Threaded Ferrule Pipe Fittings + SUS304 Tri-clamp (Tri-Clover Clamp) + Viton Gasket (Male Threaded Pipe Size:1/2 Inch DN15)

DERNORD 2 Pcs Sanitary Male Threaded Ferrule Pipe Fittings + SUS304 Tri-clamp (Tri-Clover Clamp) + Viton Gasket (Male Threaded Pipe Size:1/2 Inch DN15) - 1 x adjustable tri clamp, 2 x male threaded fitting, 1 x viton gasket304 stainless steel material. Easy tighten thumb screw. Male threaded pipe size1/2 inch dn15. Fit for all other homebrew stuff sanitary fittings. Clamp size 15″ tri clamp ferrule size 505mm pipe od.

 

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2 Tube OD to 1-12 Tube OD

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2″ Tube OD to 1-1/2″ Tube OD

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2″ Tube OD to 1-1/2″ Tube OD - Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access. Tri clamp size reducing 2″ tri clamp / clover / sanitary to 15″ tri clamp / clover / sanitary, (64mm to 51mm ferrule od). Reducer sanitary fitting can be used to connect two pipes of different diameters that are along the same pipe axis. Tube od reducing 2″ tube od to 15″ tube od, (51mm to 38mm tube od). High quality 304 stainless steel, having durable and long service life.

 

Diameter 76mm 3 45 Degree Sanitary Weld Elbow Pipe Fitting Stainless Steel 304

Diameter 76mm 3″ 45 Degree Sanitary Weld Elbow Pipe Fitting Stainless Steel 304

Diameter 76mm 3″ 45 Degree Sanitary Weld Elbow Pipe Fitting Stainless Steel 304 - Fitting welds to tubing on both ends to create a tight seal against leaks,low carbon content to ensure greater resistance to corr,low carbon content to ensure greater resistance to corr. Operating temperatures range from -425 to 1200 degrees f,meets specification astm a269 for quality assurance. Od 76mm 3″,wall thickness 2 mm, long radius 45-degree elbow for changing flow direction. High pressure durable,welded connections ensure tight seals and reduce the possibility of leakage. Made of stainless steel 304 for strength and greater ease in welding.

 

Dixon 16AMP-R50-75 Stainless Steel 316L Sanitary Fitting Clamp End Cap 12 to 34 Tube OD Range

Dixon 16AMP-R50-75 Stainless Steel 316L Sanitary Fitting, Clamp End Cap, 1/2″ to 3/4″ Tube OD Range

Dixon 16AMP-R50-75 Stainless Steel 316L Sanitary Fitting, Clamp End Cap, 1/2″ to 3/4″ Tube OD Range - Maximum operating pressure rating of 250 psi at 70 degrees f ambient temperature. Clamp end connection for a non-permanent seal, providing access to lines. Meets 3-a sanitary standards number 63-03 for sanitary fitting (authorization number 621). End cap for closing the end of a pipe or tube. Stainless steel 316l for strength and greater ease in welding than 304-grade steel.

 

DERNORD Eccentric Reducer Tri clamp Sanitary Fitting 2 inch x 15 inch SS304

DERNORD Eccentric Reducer Tri clamp Sanitary Fitting 2 inch x 1.5 inch SS304

DERNORD Eccentric Reducer Tri clamp Sanitary Fitting 2 inch x 1.5 inch SS304 - Concentric reducer fitting to connect two pipes of different diameters that are along the different pipe axis. Stainless steel 304 for resistance to corrosion and high temperature. Ferrule size(38mm end)51mm ferrule fits 15″ tri clamp. Ferrule size(51mm end)64mm ferrule fits 2″ tri clamp. Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access.

 

Beduan 15 Tri Clamp to 34 NPT Male Stainless Steel Sanitary Fitting Home Brew Connector Ferrule OD 505mm

Beduan 1.5″ Tri Clamp to 3/4″ NPT Male Stainless Steel Sanitary Fitting Home Brew Connector (Ferrule OD 50.5mm)

Beduan 1.5″ Tri Clamp to 3/4″ NPT Male Stainless Steel Sanitary Fitting Home Brew Connector (Ferrule OD 50.5mm) - Two fittings are clamped together with a high temp silicone gasket in between. Used for food, beverage, and dairy applications. Suitable for 15″ tri clamp / clover / sanitary. High quality 304 stainless steel, having durable and long service life. Pipe size 3/4″ npt thread.

 

Beduan Elbow 90 Degree 1-12 Tube OD Stainless Steel 15 Tri Clamp Sanitary Pipe Fitting Ferrule OD 505mm

Beduan Elbow 90 Degree 1-1/2″ Tube OD Stainless Steel 1.5″ Tri Clamp Sanitary Pipe Fitting (Ferrule OD 50.5mm)

Beduan Elbow 90 Degree 1-1/2″ Tube OD Stainless Steel 1.5″ Tri Clamp Sanitary Pipe Fitting (Ferrule OD 50.5mm) - Elbow 90 degree clamp for connecting two pipes or tubes at an angle. High pressure durable, stainless steel 304 for resistance to corrosion and high temperatures. Ferrule size 505mm fits to 15″ ferrule tri clamp. For tube od 38mm(15″). Clamps to tubing on two ends for a non-permanent seal, providing take-down access.

 

Dixon B23BMP-G300 Stainless Steel 304 Sanitary Fitting Thermometer Cap 3 Tube OD x 34 NPT Female

Dixon B23BMP-G300 Stainless Steel 304 Sanitary Fitting, Thermometer Cap, 3″ Tube OD x 3/4″ NPT Female

Dixon B23BMP-G300 Stainless Steel 304 Sanitary Fitting, Thermometer Cap, 3″ Tube OD x 3/4″ NPT Female - Maximum operating pressure rating of 250 psi at 70 degrees f ambient temperature. Stainless steel 304 for resistance to corrosion and high temperatures. Clamp end connection for a non-permanent seal, providing access to lines. Cap for closing the end of a pipe or tube with a female npt opening for a thermometer (not included).

 

DERNORD 2 Pcs Sanitary Female Threaded Ferrule Pipe Fittings  SUS304 Tri-clamp Tri-Clover Clamp  Slicone Gasket Female Threaded Pipe Size34 Inch DN20

DERNORD 2 Pcs Sanitary Female Threaded Ferrule Pipe Fittings + SUS304 Tri-clamp (Tri-Clover Clamp) + Slicone Gasket (Female Threaded Pipe Size:3/4 Inch DN20)

DERNORD 2 Pcs Sanitary Female Threaded Ferrule Pipe Fittings + SUS304 Tri-clamp (Tri-Clover Clamp) + Slicone Gasket (Female Threaded Pipe Size:3/4 Inch DN20) - Female threaded pipe size3/4 inch ( dn20 ). Clamp size 15″ tri clamp ferrule size 505mm pipe od. Fit for all other homebrew stuff sanitary fittings. Easy tighten thumb screw. 1 x adjustable tri clamp, 2 x female threaded fitting, 1 x silicone gasket304 stainless steel material.

 

15Tri Clamp to Ball Lock Post SS304 Sanitary Brewer Fitting 505mm OD Ferrule for SS conical fermenter Pressure Transfer Gas and Liquid

1.5″Tri Clamp to Ball Lock Post, SS304 Sanitary Brewer Fitting, 50.5mm OD Ferrule for SS conical fermenter Pressure Transfer (Gas and Liquid)

1.5″Tri Clamp to Ball Lock Post, SS304 Sanitary Brewer Fitting, 50.5mm OD Ferrule for SS conical fermenter Pressure Transfer (Gas and Liquid) - You can attach a liquid and gas ball lock disconnect to a 15″tc port. The ball lock post is removable from the tc side. Gas and liquid post set. The ball lock post is removable from the tc side and it is equipped with a poppit valve like all corny post. It is equipped with a poppit valve like all corny post.

 

DERNORD 2 Tri clamp Adapter to 2 inch MNPT Thread Ferrule Sanitary Pipe Fitting

DERNORD 2” Tri clamp Adapter to 2 inch MNPT Thread Ferrule Sanitary Pipe Fitting

DERNORD 2” Tri clamp Adapter to 2 inch MNPT Thread Ferrule Sanitary Pipe Fitting - The tri-clamp xmale npt adapter, which provides a secure, rust-resistant solution for simple conversions and hose adaptions. All tri-clamp x male npt adapters are composed of long-lasting stainless steel 304. Dernord pipe fittings are npt type. Dernord pipe fittings are npt type. Determining npt/nps size to distinguish between npt and nps is based on the nominal pipe diameter, not the outside diameter (od) of the threads. For example a 1/2″ npt male fitting has an outside thread diameter of approximately 3/4″, but as stated the correct npt size is 1/2″, including the counterpart female. While npt and nps threads may be joined together, their threads may not form a proper seal, or not be an optimal connection.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.