Coolest 17 Compression Fittings

 

Anderson Metals 50062 Brass Compression Tube Fitting Union 12 x 12 Tube OD #ad

Anderson Metals 50062 Brass Compression Tube Fitting, Union, 1/2″ x 1/2″ Tube OD

Anderson Metals 50062 Brass Compression Tube Fitting, Union, 1/2″ x 1/2″ Tube OD #ad - Primary uses water, gasoline, oil and vacuum lines. Use with copper, brass, aluminum, or plastic tubing. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Easy to disassemble no flaring tool required. Three piece construction, nut, sleeve and body with attached insert. Standard fittings use short nuts.

 

Dixon 68C-0604 Brass Compression Tube Fitting Connector 38 Tube OD x 14 NPT Male #ad

Dixon 68C-0604 Brass Compression Tube Fitting, Connector, 3/8″ Tube OD x 1/4″ NPT Male

Dixon 68C-0604 Brass Compression Tube Fitting, Connector, 3/8″ Tube OD x 1/4″ NPT Male #ad - Brass compression fitting. Underwriter’s laboratories listed for flammable liquid. Compression fittings meet functional requirements of sae j-512 and asa. No flaring, soldering or other preparation of tubing necessary to assemble. Manufactured for low and medium pressure tubing connection work where excessive vibration or tube movement is not involved.

 

Ham-Let 3001630 Stainless Steel 316 Let-Lok Compression Fitting Adapter 14 Tube OD x 18 Tube OD #ad

Ham-Let 3001630 Stainless Steel 316 Let-Lok Compression Fitting, Adapter, 1/4″ Tube OD x 1/8″ Tube OD

Ham-Let 3001630 Stainless Steel 316 Let-Lok Compression Fitting, Adapter, 1/4″ Tube OD x 1/8″ Tube OD #ad - Meets astm standards a213 and a269 for quality assurance. Operating temperatures range from -100 to 1000 degrees f. Union for connecting and disconnecting two pipes more easily than couplings. Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel. Fitting connects to tubing on both ends.

 

LASCO 15-8514P 58 710 OD Drip Tube Compression Fitting by Female Hose Swivel Tee #ad

LASCO 15-8514P 5/8 710 OD Drip Tube Compression Fitting by Female Hose Swivel Tee

LASCO 15-8514P 5/8 710 OD Drip Tube Compression Fitting by Female Hose Swivel Tee #ad - Lasco plumbing specialties 15-8514p 5/8 710 od drip tube compression fitting by female hose swivel tee. 5/8 710 od drip tube adapter tee. Works with toro blue strip tubing or any other 710 tubing. 710 tubing by female pipe thread swivel, connects 710 drip tubing together for leak proof joint.

 

Anderson Metals 50069 Brass Compression Tube Fitting 90 Degree Elbow 14 Tube OD x 18 NPT Male Pipe #ad

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4″ Tube OD x 1/8″ NPT Male Pipe

Anderson Metals 50069 Brass Compression Tube Fitting, 90 Degree Elbow, 1/4″ Tube OD x 1/8″ NPT Male Pipe #ad - Standard fittings use short nuts. Easy to disassemble no flaring tool required. Use with copper, brass, aluminum, or plastic tubing. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories. Three piece construction, nut, sleeve and body with attached insert. Primary uses water, gasoline, oil and vacuum lines.

 

Parker MB Series Stainless Steel 316 Ball Valve Inline 38 A-Lok Compression Fitting #ad

Parker MB Series Stainless Steel 316 Ball Valve, Inline, 3/8″ A-Lok Compression Fitting

Parker MB Series Stainless Steel 316 Ball Valve, Inline, 3/8″ A-Lok Compression Fitting #ad - Lever handle for manual on/off control. Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. A-lok compression ends for a leak-proof connection. Maximum pressure rating of 3000 psig for cwp working temperature range of -60 to 300 degrees fahrenheit. Pfa seat and packing design for tight sealing.

 

LASCO 19-5061 Union Compression Fitting with 14-Inch and 18-Inch OD Tube Nylon #ad

LASCO 19-5061 Union Compression Fitting with 1/4-Inch and 1/8-Inch OD Tube, Nylon

LASCO 19-5061 Union Compression Fitting with 1/4-Inch and 1/8-Inch OD Tube, Nylon #ad - Use for hot or cold water. No need to disassemble fitting, just loosen the nut, insert tubing, then tighten. 1/4-inch x 1/8-inch od tube union. Use on copper, pex, poly and aluminum tubing. Nylon compression fitting with integral sleeve nut.

 

Brass Compression Fitting Hardware Kit - Metal Tray Box #ad

Brass Compression Fitting Hardware Kit – Metal Tray Box

Brass Compression Fitting Hardware Kit – Metal Tray Box #ad - Assortment comes in a metal box measuring 13-3/8 by 9-1/4 by 2 inches. 24 items 144 pieces.

 

ESUMIC Compression For Connector Tool Cable Stripper RG6 Fitting With 20x F Compression connectors #ad

ESUMIC Compression For Connector Tool Cable Stripper RG6 Fitting With 20x F Compression connectors

ESUMIC Compression For Connector Tool Cable Stripper RG6 Fitting With 20x F Compression connectors #ad - Universal compression/crimping tool 3 in 1 works with rg-6, rg-59, rg-58, bnc, rca compression connectors pre-calibrated and easy to use compatible with almost all connectors, eg ppc, digicon, gilbert, holland, thomas and betts snap and seal, ultrease, stirling, lock and seal, etc. 20 compression f connectors premium quality connectors are designed to provide a professional, secure, waterproof connection for rg6 coaxial cable all metal construction, anti-corrosion nickel-plated for indoor/outdoor use for a tight weather sealed connection perfect for multiple coax applications such as antennas, catv, satellite, cctv, boadband cabling, etc. Heavy duty lightweight ergonomic design. Perfect for satellite tv, catv, home theater, and security. Rotary cable stripper fully adjustable 2 blade design can be used for rg-6, rg-6 quad, rg-59, rg-59 quad and rg-58 lightweight ergonomic design.

 

XSPC G14 to 716 ID 58 OD Compression Fitting Black Chrome V2 - 4 pack #ad

XSPC G1/4″ to 7/16″ ID, 5/8″ OD Compression Fitting Black Chrome V2 – 4 pack

XSPC G1/4″ to 7/16″ ID, 5/8″ OD Compression Fitting Black Chrome V2 – 4 pack #ad - Xspc 5060175585080 specificationsthese high quality compression fittings from xspc can be easily installed by putting a coin in their notch to screw them in., Black chrome finish- for 7/16″ id, 5/8″ od tubing (11. For use with 7/16″ id x 5/8″ od tubing only. 1mm id, 16mm od)- low profile design- g1/4″ thread- easy tool free coin installationpackage includes4, xspc g1/4″ to 7/16″ id, 5/8″ od compression fitting black chrome v2.

 

Parker Hannifin 68C-6-4 Brass Male Connector Compression Fitting 38 Compression Tube x 14 Male Thread #ad

Parker Hannifin 68C-6-4 Brass Male Connector Compression Fitting, 3/8″ Compression Tube x 1/4″ Male Thread

Parker Hannifin 68C-6-4 Brass Male Connector Compression Fitting, 3/8″ Compression Tube x 1/4″ Male Thread #ad - Compression fittings are especially useful in installations that may require occasional disassembly or partial removal for maintenance since the fitting can be broken and remade without affecting the integrity of the joint. Parker’s compression fittings are economical and offered in both extrusions and forgings. Compression fittings are also used in situations where a heat source, in particular a soldering torch, is prohibited. These compression fittings require no flaring, soldering, tube preparation or special tools to operate.

 

DIG Corporation 12 compression elbow drip irrigation fitting 700 OD Bag of 25 #ad

DIG Corporation 1/2″ compression elbow, drip irrigation fitting .700 OD, Bag of 25

DIG Corporation 1/2″ compression elbow, drip irrigation fitting .700 OD, Bag of 25 #ad - Uv-resistant. High impact plastic. Operating pressure 10 to 30 psi. Secure and easy installation without glues or clamps. Color coded.

 

25 Brass Compression Fitting Sleeves 316 #ad

25 Brass Compression Fitting Sleeves 3/16″

25 Brass Compression Fitting Sleeves 3/16″ #ad - Sleeve for a tube compression fitting. Operating temperature range of -65 to +250-degree f. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. No flaring tool required for assembly. Connects to 1/4″ copper, brass, aluminum, or plastic tubing.

 

Anderson Metals Brass Tube Fitting Coupling 12 Compression x 38 Female Pipe #ad

Anderson Metals Brass Tube Fitting, Coupling, 1/2″ Compression x 3/8″ Female Pipe

Anderson Metals Brass Tube Fitting, Coupling, 1/2″ Compression x 3/8″ Female Pipe #ad - Primary uses water, gasoline, oil and vacuum lines. Three piece construction, nut, sleeve and body with attached insert. Use with copper, brass, aluminum, or plastic tubing. Standard fittings use short nuts. Easy to disassemble no flaring tool required. These fittings contain lead and are not allowed by federal law to be installed for potable water use in the usa and its territories.

 

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting Thermocouple Adapter 14 NPT Male x Tube OD #ad

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Thermocouple, Adapter, 1/4″ NPT Male x Tube OD

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Thermocouple, Adapter, 1/4″ NPT Male x Tube OD #ad - Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304. Meets astm a213 and a269 standards for quality assurance. Maximum operating pressure rating of 10,000 psi at a temperature range of -100 to +1,000 degrees f. Adapter fitting to connect two tubes with different end types. Male npt connection on one end and tube connection on the other.

 

Lemoy Fridge Connection and Ice Maker Kit for Reverse Osmosis Water Systems 16 feet 14 inch Tubing with 14 inch Push-In and Compression Fittings blue #ad

Lemoy Fridge Connection and Ice Maker Kit for Reverse Osmosis Water Systems, 16 feet 1/4 inch Tubing with 1/4 inch Push-In and Compression Fittings (blue)

Lemoy Fridge Connection and Ice Maker Kit for Reverse Osmosis Water Systems, 16 feet 1/4 inch Tubing with 1/4 inch Push-In and Compression Fittings (blue) #ad - Assists in delivering crystal clear ice cubes and great tasting ro water to your fridge. Connects any ro system to an additional dispension location. Compatible with reverse osmosis systems and water filter systems with standard 1/4″ tubing. Push-in quick connect fittings offer easy diy installation with no tools required. Kit includes 16 feet 1/4″ tubing, a 1/4″ x 1/4″ x 1/4″ “t” valve,a 1/2 inch to 1/4 inch male/female quick connect, an inline 1/4″ x 1/4″ shut off valve, and a compression fitting set, tested by independent third-party to meet nsf/ansi standard.

 

Parker A-Lok 4SC4-B Brass Compression Tube Fitting Union 14 Tube OD #ad

Parker A-Lok 4SC4-B Brass Compression Tube Fitting, Union, 1/4″ Tube OD

Parker A-Lok 4SC4-B Brass Compression Tube Fitting, Union, 1/4″ Tube OD #ad - Compression connections on both ends to provide a leak-proof connection without the need for additional joining preparations. Dual couplings for joining two tubes of the same diameter. Capable of joining a variety of tubing materials such as stainless steel, copper, and rigid and semi-rigid plastics and polymers. Back ferrules hold tubing tight within the body of the fitting while front ferrules hold tubing tight through the nut. Solid brass construction for durability and resistance to corrosion.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.