Coolest 15 Air Tanks

 

Vixen Horns 250 PSI Safety Valve 14 NPT for TrainAir Horn Tanks VXA7250

Vixen Horns 250 PSI Safety Valve 1/4″ NPT for Train/Air Horn Tanks VXA7250

Vixen Horns 250 PSI Safety Valve 1/4″ NPT for Train/Air Horn Tanks VXA7250 - The valve has a ring that can be pulled to bleed pressure from the tank manually, a very handy feature when you need to drain your tank. This safety valve will automatically release air from the tank if the pressure exceeds 250 psi. The threaded end is ¼” npt male. A safety valve should be present in every air tank to prevent accidents if the pressure switch fails to cut off the air compressor. A high quality brass fitting manufactured to the highest standards required on pneumatic applications. 250 psi safety valve thread ¼” npt brass material designed to release pressure from the air tank if this one exceeds 250 psi.

 

Beduan Union Tee 516 304 Stailess Steel 3 Way Tee Air Tank Air Bags for Truck Pneumatic Fitting Transfer Kit Air Line Tubing Hose Tube

Beduan Union Tee 5/16″, 304 Stailess Steel 3 Way Tee Air Tank Air Bags for Truck Pneumatic Fitting Transfer Kit Air Line Tubing Hose Tube

Beduan Union Tee 5/16″, 304 Stailess Steel 3 Way Tee Air Tank Air Bags for Truck Pneumatic Fitting Transfer Kit Air Line Tubing Hose Tube - 【Push type】push lock union tee fitting designed for quick and simple installation, and compact one piece fitting assembly in tight places and for precise positioning. 【Usage】worked great with the air bags for truck, air brake system, hdraulic system, industrial pneumatic tools and other applications. 【Good performance】quick construction for maximum strength and durablity support up to 250 psi of air pressure. 【high quality】304 stainless steel durable material the high-quality tee manufactured to the highest standards required for air system applications. 【Universal size】compatible with 5/16″ od tube hose.

 

G12 DN15 Automatic Electronic Timed Drain Valve Air Tank Water Moisture for Air Compressor Condensate Management Integrated Valve AC 230V

G1/2 DN15 Automatic Electronic Timed Drain Valve Air Tank Water Moisture for Air Compressor Condensate Management, Integrated Valve (AC 230V)

G1/2 DN15 Automatic Electronic Timed Drain Valve Air Tank Water Moisture for Air Compressor Condensate Management, Integrated Valve (AC 230V) - 5-10sec. 6mpa fluid air, water fluid temperature -5℃~80℃ fluid direction one-way package included 1 × automatic electronic timed drain valve note the ac230v one can also connect to ac220v. Thread g1/2 (dn15) thread outer diameter approx. 5-45min. Specifications voltage ac110v, ac230v (optional) valve type integrated valve material brass valve operating modes direct-acting interval(off) 0. 21mm pressure 0-1. Discharge time 0.

 

New Stainless Steel Liquid Filled Pressure GAUGE WOG Water Oil Gas 0 to 100 PSI Center Back Mount 0-100 14 NPT Male 25 FACE DIAL for Compressor Hydraulic AIR Tank

New Stainless Steel Liquid Filled Pressure GAUGE WOG Water Oil Gas 0 to 100 PSI Center Back Mount 0-100 1/4″ NPT Male 2.5″ FACE DIAL for Compressor Hydraulic AIR Tank

New Stainless Steel Liquid Filled Pressure GAUGE WOG Water Oil Gas 0 to 100 PSI Center Back Mount 0-100 1/4″ NPT Male 2.5″ FACE DIAL for Compressor Hydraulic AIR Tank - Click on the technical specs tab for more information. This gauge also has a blue pressure relief vent that needs to be pulled up before use. Bar reading at 0-7. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge reads at 0, 20, 40, 60, 80, 100 psi with line markings every 2 psi. One new top quality liquid filled 1/4″ npt center back mount 0-100 psi air pressure gauge.

 

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI CENTER BACK MOUNT 0-100 14 NPT 4 FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK PRESSURE WASHER

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI CENTER BACK MOUNT 0-100 1/4″ NPT 4″ FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK PRESSURE WASHER

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI CENTER BACK MOUNT 0-100 1/4″ NPT 4″ FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK PRESSURE WASHER - This gauge has been specifically designed with the original equipment manufacturers in mind and are typically used on hydraulic & pneumatic systems as well as any commercial or industrial application not corrosive to brass and bronze wetted parts where glycerine filling is suitable for use. – stainless steel case and bezel, brass internals & connection, phosphor bronze bourdon tube, plastic lens standard, glycerine filled the glycerine filling helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement (and keeping contaminates such as dirt away from all moving parts) which will extend the life of the gauge.

 

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI LOWER MOUNT 0-100 PSI 18 NPT 15 FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI LOWER MOUNT 0-100 PSI 1/8″ NPT 1.5″ FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI LOWER MOUNT 0-100 PSI 1/8″ NPT 1.5″ FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK - This gauge has been specifically designed with the original equipment manufacturers in mind and are typically used on hydraulic & pneumatic systems as well as any commercial or industrial application not corrosive to brass and bronze wetted parts where glycerine filling is suitable for use., Stainless steel case and bezel, brass internals & connection, phosphor bronze bourdon tube, plastic lens standard, glycerine filled the glycerine filling helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement (and keeping contaminates such as dirt away from all moving parts) which will extend the life of the gauge.

 

New In tank Check valve for air compressor 12 FPT x 12 MPT

New In tank Check valve for air compressor 1/2″ FPT x 1/2″ MPT

New In tank Check valve for air compressor 1/2″ FPT x 1/2″ MPT - Air inlet threads 1/2″  female npt which measure about 24/32 in diameter. Outlet threads male npt which measure about 26/32 in diameter these threads are the male threads that screw into the air tank. Brass. 1/2″ male npt x 1/2″ female npt check valve. Side un-loader port 1/8″ female npt threads, which measure about 10/32″ in diameter this port is used for a un-loader line, some compressors do not have this if yours does not you would just plug this port.

 

New In tank Check valve for air compressor 12 comp x 12 mpt

New In tank Check valve for air compressor 1/2″ comp x 1/2″ mpt

New In tank Check valve for air compressor 1/2″ comp x 1/2″ mpt - This style is used to directly screw into the air tank and keep pressure from leaving the tank and putting pressure against the compressor pump once the compressor is shut off. Brand new 1/2 npt by 1/2 compression air compressor in tank check valve, with 1/8 female npt threads on the side for un-loader port. This item is made in the united states by conrader co. Check valves are used to prevent backflow of air.

 

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 160 PSI CENTER BACK MOUNT 0-160 14 NPT MALE 25 FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 160 PSI CENTER BACK MOUNT 0-160 1/4″ NPT MALE 2.5″ FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 160 PSI CENTER BACK MOUNT 0-160 1/4″ NPT MALE 2.5″ FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK - Click on the technical specs tab for more information. One new top quality liquid filled 1/4″ npt center back mount 0-160 psi air pressure gauge. This gauge reads at 0, 20, 40, 60, 80, 100, 120, 140, 160 psi with line markings every 2 psi. Bar reading at 0, 2, 4, 6, 8, 10, 11. This gauge has a glycerine filling that helps dampen the effects of pulsation and vibration, while also perpetually lubricating the movement, and keeping contaminates such as dirt away from all moving parts, which will extend the life of the gauge. This gauge also has a blue pressure relief vent that needs to be pulled up before use.

 

TurboTorch 0386-0834 PL-8ADLX-MC Torch Kit Swirl for  MC tank Air Acetylene

TurboTorch 0386-0834 PL-8ADLX-MC Torch Kit Swirl for MC tank, Air Acetylene

TurboTorch 0386-0834 PL-8ADLX-MC Torch Kit Swirl for MC tank, Air Acetylene - Improved design features quick-disconnect handles and tips, replaceable tips and color coded “o” rings for quick gas identification. Applications for this torch kit are high capacity and hvac applications. Features are the following gauge guards, mc tank connections, instruction manual, cylinder wrench, ar-mc (cga 200) regulator. All air acetylene kits include gauge guards and cylinder wrench. Delivers high heat, super fast, reducing brazing time and fuel consumption.

 

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI LOWER MOUNT 0-100 PSI 14 NPT 25 FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI LOWER MOUNT 0-100 PSI 1/4″ NPT 2.5″ FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK

NEW STAINLESS STEEL LIQUID FILLED PRESSURE GAUGE WOG WATER OIL GAS 0 to 100 PSI LOWER MOUNT 0-100 PSI 1/4″ NPT 2.5″ FACE DIAL FOR COMPRESSOR HYDRAULIC AIR TANK - 1. It also lubricates the moverment which extends the life of the gauge. 5% span of accuracy this style liquid gauge can handle any application between -104 degrees through 158 degrees f liquid/glycerin filled gauges enhance the reliability and integrity of the measuring systems for long periods., Stainless steel case, copper alloy wetted parts, polycarbonate lens, glycerine filled. The glycerin filling helps dampen the effects of vibration and pulsation.

 

TurboTorch 0386-0832 PL-5ADLX-MC Torch Kit Swirl for  MC tank Air Acetylene

TurboTorch 0386-0832 PL-5ADLX-MC Torch Kit Swirl for MC tank, Air Acetylene

TurboTorch 0386-0832 PL-5ADLX-MC Torch Kit Swirl for MC tank, Air Acetylene - Valve position is in the rear. Process is air acetylene. All air acetylene kits include gauge guards and cylinder wrench. Silver brazes up to 3/4 inch. Improved design features quick-disconnect handles and tips, replaceable tips and color coded “o” rings for quick gas identification. Features include gauge guards, mc tank connections, instruction manual, cylinder wrench, ar-mc regulator, g-4 handle, ah-12 hose, and pl-5a tip. Victor turbotorch 0386-0832 pl-5adlx-mc torch kit swirl, for mc tank, air acetylene delivers high heat, super fast, reducing brazing time and fuel consumption. Industrial applications include high capacity and hvac. Soft solders up to 1-1/2 inches.

 

Vixen Horns 18 NPT Male Compression Fitting for 38 OD Tubes for TrainAir Horn Tanks - Bundle of Four Fittings VXA7718-4

Vixen Horns 1/8″ NPT (Male) Compression Fitting for 3/8″ OD Tubes for Train/Air Horn Tanks – Bundle of Four Fittings VXA7718-4

Vixen Horns 1/8″ NPT (Male) Compression Fitting for 3/8″ OD Tubes for Train/Air Horn Tanks – Bundle of Four Fittings VXA7718-4 - This straight compression fitting accepts 3/8″ od hose. The threaded end is 1/8″ npt male. Made of durable brass material that can support up to 350 psi. A high quality fitting manufactured to the highest standards required on high pressure pneumatic applications. 1/8″ npt compression fitting (4 pack) thread 1/8″ npt for 3/8″ od tubes durable brass material. Can be used with brass, copper, aluminum or steel tubing. Hose installation is done by taking out the compression nut, pushing the hose into the inlet and tighten the nut back to the fitting.

 

Vixen Horns 18 NPT Male Compression Fitting for 14 OD Tubes for TrainAir Horn Tanks VXA7018

Vixen Horns 1/8″ NPT (Male) Compression Fitting for 1/4″ OD Tubes for Train/Air Horn Tanks VXA7018

Vixen Horns 1/8″ NPT (Male) Compression Fitting for 1/4″ OD Tubes for Train/Air Horn Tanks VXA7018 - 1/8″ npt compression fitting thread 1/8″ npt for ¼” od tubes durable brass material. Hose installation is done by taking out the compression nut, pushing the hose into the inlet and tighten the nut back to the fitting. A high quality fitting manufactured to the highest standards required on high pressure pneumatic applications. Made of durable brass material that can support up to 350 psi. This straight compression fitting accepts ¼” od hose. Can be used with brass, copper, aluminum or steel tubing. The threaded end is 1/8″ npt male.

 

TurboTorch 0386-0833 PL-5ADLX-B Torch Kit Swirl for  B tank Air Acetylene

TurboTorch 0386-0833 PL-5ADLX-B Torch Kit Swirl for B tank, Air Acetylene

TurboTorch 0386-0833 PL-5ADLX-B Torch Kit Swirl for B tank, Air Acetylene - Delivers high heat, super fast, reducing brazing time and fuel consumption. Soft solder to 1-1/2 inches and silver brazes to 3/4 inch. Process is air acetylene.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.