Best Polycap out of top 22

 

Whatman 4651B47EA 6700-7501 Polycap TF 75 PTFE Membrane Capsule Filter with SB Inlet and Outlet 60 PSI Maximum Pressure 01 μm

Whatman 4651B47EA 6700-7501 Polycap TF 75 PTFE Membrane Capsule Filter with SB Inlet and Outlet, 60 PSI Maximum Pressure, 0.1 μm

Whatman 4651B47EA 6700-7501 Polycap TF 75 PTFE Membrane Capsule Filter with SB Inlet and Outlet, 60 PSI Maximum Pressure, 0.1 μm - Filtration area 75mm capsule. Fittings 3/8 inch female national pipe thread. Some applications buffers, clean air and gas equipment, cosmetics and personal care products, food and beverage, general fine filtration, inks and pigments, pharmaceutical solutions, solvents. Pore size 50µm. Steam autoclavable at 121° c for 20 minutes manufactured in a class 10,000 clean room in an iso certified manufacturing plant materials are fda approved for food contact.

 

Whatman 6704-9502 Polycap TC 150 Polyethersulfone Membrane Capsule Filters with 1-12 Sanitary Inlet and Outlet 60 psi Maximum Pressure 0202 Micron Pack of 5

Whatman 6704-9502 Polycap TC 150 Polyethersulfone Membrane Capsule Filters with 1-1/2″ Sanitary Inlet and Outlet, 60 psi Maximum Pressure, 0.2/0.2 Micron (Pack of 5)

Whatman 6704-9502 Polycap TC 150 Polyethersulfone Membrane Capsule Filters with 1-1/2″ Sanitary Inlet and Outlet, 60 psi Maximum Pressure, 0.2/0.2 Micron (Pack of 5) - 2µm. 5/pack. The pes membrane is inherently hydrophilic, has low extractables, is bio-safe, has excellent flow rates, and exhibits low protein binding. 5 inch sanitary fittings. Maximum pressure is 60psi (4. 2µm pore size and 1. This polycap tc 150 capsule filter device by whatman is a disposable, dual layer, non-sterile, polyethersulfone (pes) membrane filtration capsule with a 0. 2/0. Whatman # 6704-9502. 2/0. Pore size 0. Fittings 1. 5 inch sanitary. Filtration area, capsule 150mm. It provides efficient filtration for critical aqueous solutions. 1 bar).

 

Whatman Polycap Disposable Capsules 36 TF and 75 TF 045micrometer

Whatman Polycap Disposable Capsules, 36 TF and 75 TF, 0.45micrometer

Whatman Polycap Disposable Capsules, 36 TF and 75 TF, 0.45micrometer - Autoclavablepolypropylene housingall bonds are fused no glues, adhesives, metals, epoxies usedco. Solvent filtration capsules retention (with air purge), .

 

Whatman 6701-7510 Polycap TF PTFE Capsule Filter 10um 1000cm2 12 ID 1Pk

Whatman 6701-7510 Polycap TF PTFE Capsule Filter, 1.0um, 1000cm2, 1/2″ ID; 1/Pk

Whatman 6701-7510 Polycap TF PTFE Capsule Filter, 1.0um, 1000cm2, 1/2″ ID; 1/Pk - Ptfe membrane is ideal for venting, in-line filtration, and isolation (gas pass, liquids, and aerosol stopped) autoclavable. Capsules include a lure lock vent to guarantee that no filtration area is wasted. Choose from ptfe, polypropylene (pp), or sterile nylon membranes. Use vent to draw solution into the capsule or let air escape from the capsule or sample port. Capsules feature sturdy pp housings with fused seals—no glues or adhesives to contaminate filtrate. Use vent to draw solution into the capsule or let air escape from the capsule or sample port. Warning this product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications. Use ptfe or pp filter capsules for high-efficiency filtration. Nylon membranes are hydrophilic and low in extractable they include a prefilter to prolong the life of the membrane. Capsules include a lure lock vent to guarantee that no filtration area is wasted. All capsules feature sturdy pp housings with fused seals-no glues or adhesives to contaminate filtrate. Use nylon filter capsules for filtering aqueous solutions.

 

Whatman 6706-3602 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell 60 psi Maximum Pressure 02 Micron

Whatman 6706-3602 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell, 60 psi Maximum Pressure, 0.2 Micron

Whatman 6706-3602 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell, 60 psi Maximum Pressure, 0.2 Micron - Ultra-clean containing no surfactant or mold release agents. Autoclavable some presterilized with gamma irradiation. Sterile 02µm with stepped barb inlet and outlet plus filling bell. Polycap as 36mm filter recommended for filtering aqueous solutions. Provides highly effective filtration area in a small size.

 

Whatman 6711-3601 Polycap TF 36 PTFE Membrane Capsule Filter with MNPT Inlet and SB Outlet 60 psi Maximum Pressure 01 Micron

Whatman 6711-3601 Polycap TF 36 PTFE Membrane Capsule Filter with MNPT Inlet and SB Outlet, 60 psi Maximum Pressure, 0.1 Micron

Whatman 6711-3601 Polycap TF 36 PTFE Membrane Capsule Filter with MNPT Inlet and SB Outlet, 60 psi Maximum Pressure, 0.1 Micron - Whatman # 6711-3601. The hydrophobic ptfe membrane housed in a polypropylene capsule is designed for use with solvents and aggressive solutions. The maximum pressure is 60psi (4. 1µm. 1 bar). Pore size 0. This whatman polycap tf 36 ptfe filter device is an excellent disposable encapsulated filters and has a 0. 1µm pore size, a male national pipe thread inlet, and a stepped barb outlet. The capsule filter is manufactured under very clean conditions in a class 10,000 clean room and under an iso quality system. 1/pack. Filtration area, capsule 36mm. It is fully autoclavable and integrity-testable for sterile applications. Fittings 1/4 inch male national pipe thread inlet stepped barb outlet for 6 to 10mm or 3/8 to 1/2 inch tubing.

 

Whatman 6705-3602 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet 60 psi Maximum Pressure 02 Micron

Whatman 6705-3602 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron

Whatman 6705-3602 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron - Ultra-clean containing no surfactant or mold release agents. Sterile 02µm with stepped barb 6-10mm 1/4 to 3/8 tubing. Provides highly effective filtration area in a small size. Polycap as 36mm filter recommended for filtering aqueous solutions. Autoclavable some presterilized with gamma irradiation.

 

Whatman 6714-3601 Polycap TC 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet 60 psi Maximum Pressure 0201 Micron

Whatman 6714-3601 Polycap TC 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.2/0.1 Micron

Whatman 6714-3601 Polycap TC 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.2/0.1 Micron - Polycap tc/pes 02/01 µm capsules pass the hima challenge test for sterilizing grade filters. Housing thermally fused (no surfactants or mold releasing agents) integrity-testable by bubble point, pressure decay or forward flow methods. 100 percent integrity-tested during manufacturing results are correlated to microbial retention. Manufactured in clean room facilities under iso quality systems stepped barb for 6 to 10 mm (1/4 to 3/8″) tubing. Pes membrane protein adsorption characteristics hsa 04 µg/cm square, insulin 20 µg/cm square, gammaglobulin 15 µg/cm square.

 

Whatman 6705-3600 Polycap SPF 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet 60 psi Maximum Pressure 10 Micron

Whatman 6705-3600 Polycap SPF 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 1.0 Micron

Whatman 6705-3600 Polycap SPF 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 1.0 Micron - Pore size 1. Whatman # 6705-3600. Fittings stepped barb for 6 to 10mm or 3/8 to 1/2 inch tubing. This filter is manufactured under an iso manufacturing system. Applications include biologicals, buffers, diagnostics standards, enzymes, immunologicals, nutrients, serum prefiltration, tissue culture media, and viral suspensions. 0µm pore size and stepped barb fittings. This polycap spf (serum prefilter) 36 by whatman has a 1. It is ideal for hard-to-filter solutions such as serums and protein solutions. 1/pack. It is able to be sterilized by autoclaving with steam. It is an exceptional product that is optimized for prefiltration applications and is typically used upstream of a polycap as or polycap pes capsule. 0µm. When filtering serum without proper prefiltration, membrane filters clog rapidly. Filtration area, capsule 36mm. It is suitable for filtering serums, viral suspensions, nutrients, biologicals, immunologicals, enzymes, and buffers. Prefilters help extend the life of the final filter. This filter has three layers of special media fine and ultrafine glass microfiber (gmf) and polyethersulfone membrane. Serum is difficult to filter because it contains a high degree of loading of complex particulates, lipids, triglycerides and lipoproteins that clog filters.

 

Whatman 6705-3604 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet 60 psi Maximum Pressure 045 Micron

Whatman 6705-3604 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.45 Micron

Whatman 6705-3604 Polycap AS 36 Nylon Membrane Capsule Filter with SB Inlet and Outlet, 60 psi Maximum Pressure, 0.45 Micron - Autoclavable some presterilized with gamma irradiation. Ultra-clean containing no surfactant or mold release agents. Sterile 045µm with stepped barb inlet and outlet. Provides highly effective filtration area in a small size. Polycap as 36mm filter recommended for filtering aqueous solutions.

 

Whatman 6718-9582 Polycap TC 150 Polyethersulfone Membrane Capsule Filter with 12 SB Inlet and Outlet Plus Filling Bell 60 psi Maximum Pressure 0802 Micron

Whatman 6718-9582 Polycap TC 150 Polyethersulfone Membrane Capsule Filter with 1/2″ SB Inlet and Outlet Plus Filling Bell, 60 psi Maximum Pressure, 0.8/0.2 Micron

Whatman 6718-9582 Polycap TC 150 Polyethersulfone Membrane Capsule Filter with 1/2″ SB Inlet and Outlet Plus Filling Bell, 60 psi Maximum Pressure, 0.8/0.2 Micron - 2µm. 1/pack. Filtration area, capsule 150mm. This polycap tc 150 capsule filter device with filling bell by whatman is a disposable, dual layer, sterile, polyethersulfone (pes) membrane filtration capsule with a 0. Pore size 0. Fittings 1/2 inch stepped barb. 8/0. The pes membrane is inherently hydrophilic, has low extractables, is bio-safe, has excellent flow rates, and exhibits low protein binding. Maximum pressure is 60psi (4. Whatman # 6718-9582. 0/0. It provides efficient filtration for critical aqueous solutions. 2µm pore size and 1/2 inch stepped barb fittings. 1 bar).

 

Whatman 6714-3601 Polypropylene Polycap TC Capsule Filter 60 psi SB Inlet x Outlet Sterile 0201 Micron

Whatman 6714-3601 Polypropylene Polycap TC Capsule Filter, 60 psi, SB Inlet x Outlet, Sterile, 0.2/0.1 Micron

Whatman 6714-3601 Polypropylene Polycap TC Capsule Filter, 60 psi, SB Inlet x Outlet, Sterile, 0.2/0.1 Micron - Housing thermally fused (no surfactants or mold releasing agents) integrity-testable by bubble point, pressure decay or forward flow methods. 100 percent integrity-tested during manufacturing results are correlated to microbial retention. Pes membrane protein adsorption characteristics hsa 04 g/cm square, insulin 20 g/cm square, gammaglobulin 15 g/cm square. Manufactured in clean room facilities under iso quality systems stepped barb for 6 to 10 mm (1/4 to 3/8″) tubing. Polycap tc/pes 02/01 m capsules pass the hima challenge test for sterilizing grade filters.

 

POLYCAP 36 02 PES 5PK AA S

POLYCAP 36 0.2 PES 5/PK A/A S

POLYCAP 36 0.2 PES 5/PK A/A S - 5 pieces. Polycap as 75 capsule filter, 045 µm, sb inlet and outlet. 045 µm. -. Nonsterile.

 

Polycap AS 75 Capsule Filter 045 µm SB inlet and outlet - Whatman Polycap AS Disposable Filter Capsules GE Healthcare

Polycap AS 75 Capsule Filter, 0.45 µm, SB inlet and outlet – Whatman Polycap AS Disposable Filter Capsules, GE Healthcare

Polycap AS 75 Capsule Filter, 0.45 µm, SB inlet and outlet – Whatman Polycap AS Disposable Filter Capsules, GE Healthcare - 45, and 1. 2, 0. ” Geâ€tms whatman polycap as (aqueous solution) combines a nylon membrane filter and glass microfiber (gmf) prefilter for a long lifetime device that can filter large volumes of even difficult, particulate-laden samples. Polycap as are whatman capsule filters specifically designed for high-volume filtration of aqueous sample solutions in a compact size. Browse the polycap line, to find the filter that matches your needs. First layer (gmf) acts as a prefilter to ensure longer membrane (0. With a nylon membrane filter and gmf prefilter, these filters have a long usable life. 0 µm) life and higher filtration efficiency nylon membrane filter layer is inherently hydrophilic, has low extractables, is biosafe, and has excellent flow rates polypropylene housing is thermally fused (no glues, adhesives, or extraneous materials), reducing extractable levels can be tested with bubble point, pressure decay, or forward flow methods available in presterilized and nonsterile (autoclavable) versions manufactured according to iso90012008 qms standards whatman capsule filters from ge healthcareâ€tms life sciences business are available for a variety of applications. “.

 

Whatman 2813 Polycap HD 150 Polypropylene Capsule Filter with 12 HB Inlet and Outlet 60 psi Maximum Pressure 100 Micron Pack of 5

Whatman 2813 Polycap HD 150 Polypropylene Capsule Filter with 1/2 HB Inlet and Outlet, 60 psi Maximum Pressure, 10.0 Micron (Pack of 5)

Whatman 2813 Polycap HD 150 Polypropylene Capsule Filter with 1/2 HB Inlet and Outlet, 60 psi Maximum Pressure, 10.0 Micron (Pack of 5) - Fittings 1/2 inch hose barb. Manufactured in a class 10,000 clean room in an iso certified manufacturing plant materials are fda approved for food contact. Filtration area 150mm capsule. Some applications buffers, clean air and gas equipment, cosmetics and personal care products, food and beverage, general fine filtration, inks and pigments, pharmaceutical solutions, solvents. Pore size 100µm filtration area 150mm capsule.

 

Whatman 6715-3602 Polycap TC 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell 60 psi Maximum Pressure 0202 Micron

Whatman 6715-3602 Polycap TC 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell, 60 psi Maximum Pressure, 0.2/0.2 Micron

Whatman 6715-3602 Polycap TC 36 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell, 60 psi Maximum Pressure, 0.2/0.2 Micron - Filtration area 36mm capsule. Fittings stepped barb for 6 to 10mm or 3/8 to 1/2 inch tubing. Pore size 02/02µm. Some applications aqueous solutions, biological, buffers, cleaning/rinsing solutions, enzymes, high-quality water, particle counting solutions, reagent preparation, salt solutions, virus suspensions. The pes membrane is inherently hydrophilic.

 

Whatman 6703-7510 Polycap HD 75 Polypropylene Capsule Filter with 12 SB Inlet and Outlet 60 psi Maximum Pressure 10 Micron

Whatman 6703-7510 Polycap HD 75 Polypropylene Capsule Filter with 1/2″ SB Inlet and Outlet, 60 psi Maximum Pressure, 1.0 Micron

Whatman 6703-7510 Polycap HD 75 Polypropylene Capsule Filter with 1/2″ SB Inlet and Outlet, 60 psi Maximum Pressure, 1.0 Micron - Pore size 10µm. Some applications buffers, clean air and gas equipment, cosmetics and personal care products, food and beverage, general fine filtration, inks and pigments, pharmaceutical solutions, solvents. Steam autoclavable at 121° c for 20 minutes manufactured in a class 10,000 clean room in an iso certified manufacturing plant materials are fda approved for food contact. Fittings 1/2 inch stepped barb for 1/4 inch to 1/2 inch tubing. Filtration area 75mm capsule.

 

Whatman 6705-3602 Polycap AS NYL Capsule Filter 02um 400cm2 14-38 ID 1Pk

Whatman 6705-3602 Polycap AS NYL Capsule Filter, 0.2um, 400cm2, 1/4-3/8″ ID; 1/Pk

Whatman 6705-3602 Polycap AS NYL Capsule Filter, 0.2um, 400cm2, 1/4-3/8″ ID; 1/Pk - Capsules feature sturdy pp housings with fused seals—no glues or adhesives to contaminate filtrate. Capsules include a lure lock vent to guarantee that no filtration area is wasted. Use vent to draw solution into the capsule or let air escape from the capsule or sample port.

 

Whatman 6715-7502 Polycap TC 75 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell 60 psi Maximum Pressure 0202 Micron

Whatman 6715-7502 Polycap TC 75 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell, 60 psi Maximum Pressure, 0.2/0.2 Micron

Whatman 6715-7502 Polycap TC 75 Polyethersulfone Membrane Capsule Filter with SB Inlet and Outlet Plus Filling Bell, 60 psi Maximum Pressure, 0.2/0.2 Micron - Some applications aqueous solutions, biological, buffers, cleaning/rinsing solutions, enzymes, high-quality water, particle counting solutions, reagent preparation, salt solutions, virus suspensions. The pes membrane is inherently hydrophilic. Fittings stepped barb for 6 to 10mm or 3/8 to 1/2 inch tubing. Pore size 02/02µm. Filtration area 75mm capsule.

 

Whatman 2813T Polycap HD 150 Polypropylene Capsule Filter with FNPT Inlet and Outlet 60 psi Maximum Pressure 100 Micron

Whatman 2813T Polycap HD 150 Polypropylene Capsule Filter with FNPT Inlet and Outlet, 60 psi Maximum Pressure, 10.0 Micron

Whatman 2813T Polycap HD 150 Polypropylene Capsule Filter with FNPT Inlet and Outlet, 60 psi Maximum Pressure, 10.0 Micron - Filtration area 150mm capsule. Manufactured in a class 10,000 clean room in an iso certified manufacturing plant materials are fda approved for food contact. Pore size 100µm filtration area 150mm capsule. Some applications buffers, clean air and gas equipment, cosmetics and personal care products, food and beverage, general fine filtration, inks and pigments, pharmaceutical solutions, solvents. Fittings 3/8 inch female national pipe thread.

 

Whatman 2801 Polycap TF 150 PTFE Membrane Capsule Filter with 1-12 Sanitary Inlet and Outlet 60 psi Maximum Pressure 02 Micron Pack of 5

Whatman 2801 Polycap TF 150 PTFE Membrane Capsule Filter with 1-1/2″ Sanitary Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron (Pack of 5)

Whatman 2801 Polycap TF 150 PTFE Membrane Capsule Filter with 1-1/2″ Sanitary Inlet and Outlet, 60 psi Maximum Pressure, 0.2 Micron (Pack of 5) - The filter is fully autoclavable and integrity-testable for sterile applications. Whatman # 2801. 2µm. 1 bar). This polycap tf ptfe filter device by whatman is an excellent disposable encapsulated filter with a 0. 5 inch sanitary. 5/pack. Filtration area, capsule 150mm. Maximum pressure is 60psi (4. 5 inch sanitary fittings. It is manufactured under very clean conditions in a class 10,000 clean room and under an iso quality system. Pore size 0. The hydrophobic ptfe membranes housed in a polypropylene capsule are designed for use with solvents and aggressive solutions. 2µm pore size and 1. Fittings 1.

 

Polycap AS 75 Capsule Filter 02 µm FNPT inlet and outlet - Whatman Polycap AS Disposable Filter Capsules GE Healthcare

Polycap AS 75 Capsule Filter, 0.2 µm, FNPT inlet and outlet – Whatman Polycap AS Disposable Filter Capsules, GE Healthcare

Polycap AS 75 Capsule Filter, 0.2 µm, FNPT inlet and outlet – Whatman Polycap AS Disposable Filter Capsules, GE Healthcare - 45, and 1. 0 µm) life and higher filtration efficiency nylon membrane filter layer is inherently hydrophilic, has low extractables, is biosafe, and has excellent flow rates polypropylene housing is thermally fused (no glues, adhesives, or extraneous materials), reducing extractable levels can be tested with bubble point, pressure decay, or forward flow methods available in presterilized and nonsterile (autoclavable) versions manufactured according to iso90012008 qms standards whatman capsule filters from ge healthcareâ€tms life sciences business are available for a variety of applications. With a nylon membrane filter and gmf prefilter, these filters have a long usable life. Browse the polycap line, to find the filter that matches your needs. 2, 0. First layer (gmf) acts as a prefilter to ensure longer membrane (0. “. ” Geâ€tms whatman polycap as (aqueous solution) combines a nylon membrane filter and glass microfiber (gmf) prefilter for a long lifetime device that can filter large volumes of even difficult, particulate-laden samples. Polycap as are whatman capsule filters specifically designed for high-volume filtration of aqueous sample solutions in a compact size.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.