Best and Coolest 20 Sbr Sheets

 

Kuriyama RF75-04X48X36 SBR Sheet Plate Fabric Finish Grade Red

Kuriyama RF75-04X48X36 SBR Sheet Plate, Fabric Finish, Grade Red

Kuriyama RF75-04X48X36 SBR Sheet Plate, Fabric Finish, Grade Red - Gas permeability resistance . Alkali resistance. Compression set resilience . Acid resistance. Excellent physical properties .

 

AramidSBR Sheet Gasket White 164 Thick 6 × 6 Pack of 1

Aramid/SBR Sheet Gasket, White, 1/64″ Thick, 6″ × 6″ (Pack of 1)

Aramid/SBR Sheet Gasket, White, 1/64″ Thick, 6″ × 6″ (Pack of 1) - Maximum pressure 1200 pounds_per_square_inch. Maximum temperature 400 degrees_fahrenheit. Minimum temperature, 40 degrees_fahrenheit. Mil-g-24696b.

 

SBR Styrene Butadiene Rubber Sheet 60 Shore A Black Smooth Finish No Backing 0062 Thickness 6 Width 6 Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 0.062″ Thickness, 6″ Width, 6″ Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 0.062″ Thickness, 6″ Width, 6″ Length - A higher number means the material is harder and more resistant to penetration. Rubber is a strong, flexible material that provides good insulation and shock absorption. A lower number means the material is softer and more flexible. The black sbr rubber sheet is 60 shore a and has a smooth finish. Wear resistance is the degree to which the rubber resists abrasion. Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. A hardness measurement of 60 shore a means the material has a medium-hard surface that has a balance of good penetration resistance with good bending and forming capability. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. Some types of rubber may be weather or chemical resistant and withstand high temperatures. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks.

 

SBR Styrene Butadiene Rubber Sheet 60 Shore A Black Smooth Finish No Backing 0062 Thickness 12 Width 12 Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 0.062″ Thickness, 12″ Width, 12″ Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 0.062″ Thickness, 12″ Width, 12″ Length - Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. Some types of rubber may be weather or chemical resistant and withstand high temperatures. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. Wear resistance is the degree to which the rubber resists abrasion. A lower number means the material is softer and more flexible. Rubber is a strong, flexible material that provides good insulation and shock absorption. A higher number means the material is harder and more resistant to penetration. A hardness measurement of 60 shore a means the material has a medium-hard surface that has a balance of good penetration resistance with good bending and forming capability. The black sbr rubber sheet is 60 shore a and has a smooth finish. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks.

 

SBR Styrene Butadiene Rubber Sheet 60 Shore A Black Smooth Finish No Backing 025 Thickness 12 Width 36 Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 0.25″ Thickness, 12″ Width, 36″ Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 0.25″ Thickness, 12″ Width, 36″ Length - Rubber is a strong, flexible material that provides good insulation and shock absorption. Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. A hardness measurement of 60 shore a means the material has a medium-hard surface that has a balance of good penetration resistance with good bending and forming capability. A higher number means the material is harder and more resistant to penetration. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Wear resistance is the degree to which the rubber resists abrasion. A lower number means the material is softer and more flexible. Some types of rubber may be weather or chemical resistant and withstand high temperatures. The black sbr rubber sheet is 60 shore a and has a smooth finish.

 

35-016-062-012-036 SBR Styrene Butadiene Rubber Sheet 0062 Thick 12 Width 36 Length Gray

35-016-062-012-036 SBR (Styrene Butadiene Rubber) Sheet, 0.062″ Thick, 12″ Width, 36″ Length, Gray

35-016-062-012-036 SBR (Styrene Butadiene Rubber) Sheet, 0.062″ Thick, 12″ Width, 36″ Length, Gray - Unlike black rubber, this gray sheet does not leave behind any unsightly marks or stains. The sbr rubber found in the gray sheet possesses good oil, ozone, and chemical resistance properties for your chosen projects. This blended natural and sbr sheet rubber comes in a gray color, which provides for an alternative option to the standard black. Gray sbr sheet is composed of both sbr rubber (styrene butadiene rubber) and natural rubber. In addition, the physical characteristics of gray sheet allow it to be used in various ways. This sheet rubber is popular for use in applications that need a non-marking material.

 

Kuriyama RF75-02X48X67 Red SBR Sheet Plate and Fabric Finish Grade Red

Kuriyama RF75-02X48X67 Red SBR Sheet Plate and Fabric Finish, Grade Red

Kuriyama RF75-02X48X67 Red SBR Sheet Plate and Fabric Finish, Grade Red - Acid resistance alkali resistance compression set resilience gas permeability resistance gas resistance good physical properties heat aging abrasion resistance oil resistance tear flame resistance weathering ozone resistance.

 

SBR Styrene Butadiene Rubber Sheet 70 Shore A Black Smooth Finish No Backing 12 Thickness 4 Width 36 Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 1/2″ Thickness, 4″ Width, 36″ Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 1/2″ Thickness, 4″ Width, 36″ Length - A hardness measurement of 70 shore a means the material has a hard surface for good penetration and wear resistance. The black sbr rubber sheet is 70 shore a and has a smooth finish. Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. A lower number means the material is softer and more flexible. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. A higher number means the material is harder and more resistant to penetration. Rubber is a strong, flexible material that provides good insulation and shock absorption. Some types of rubber may be weather or chemical resistant and withstand high temperatures. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. Wear resistance is the degree to which the rubber resists abrasion.

 

SBR Styrene Butadiene Rubber Sheet 60 Shore A Black Smooth Finish No Backing 38 Thickness 6 Width 6 Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 3/8″ Thickness, 6″ Width, 6″ Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 3/8″ Thickness, 6″ Width, 6″ Length - The black sbr rubber sheet is 60 shore a and has a smooth finish. A higher number means the material is harder and more resistant to penetration. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. Wear resistance is the degree to which the rubber resists abrasion. A hardness measurement of 60 shore a means the material has a medium-hard surface that has a balance of good penetration resistance with good bending and forming capability. Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. Some types of rubber may be weather or chemical resistant and withstand high temperatures. Rubber is a strong, flexible material that provides good insulation and shock absorption. A lower number means the material is softer and more flexible.

 

Kuriyama R75-04X36X50 SBR Sheet Plate and Fabric Finish 600 PSI Grade Red

Kuriyama R75-04X36X50 SBR Sheet, Plate and Fabric Finish, 600 PSI, Grade Red

Kuriyama R75-04X36X50 SBR Sheet, Plate and Fabric Finish, 600 PSI, Grade Red - Red rubber sheet. Tensile strength 600 psi. Elongation 200%. Gas permeability resistance gas resistance heat aging abrasion resistance oil resistance tear flame resistance weathering ozone resistance. Acid resistance alkali resistance compression set resilience excellent abrasion-resistance excellent weather-resistance.

 

Rubber-Cal Cloth Inserted SBR - 70A - Rubber Sheet - 316 Thick - 8 Width x 8 Length - Black 3 Pack

Rubber-Cal Cloth Inserted SBR – 70A – Rubber Sheet – 3/16″ Thick – 8″ Width x 8″ Length – Black (3 Pack)

Rubber-Cal Cloth Inserted SBR – 70A – Rubber Sheet – 3/16″ Thick – 8″ Width x 8″ Length – Black (3 Pack) - This reinforced sheet rubber has an approximate weight of 1lb per square foot in 1/8″ thick. Cloth inserted rubber sheet durometer has a 65-75, with limited flexibility and low elasticity. This reinforced sheet rubber is available in 4 thicknesses (1/16″, 1/8″, 3/16″, 1/4″). Reinforced elastomer with minimum tensile strength of 500 psi (4 mpa). Made from styrene butadiene rubber (sbr rubber) this is a smooth black rubber.

 

SBR Styrene Butadiene Rubber Sheet 70 Shore A Black Smooth Finish No Backing 025 Thickness 36 Width 48 Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 0.25″ Thickness, 36″ Width, 48″ Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 0.25″ Thickness, 36″ Width, 48″ Length - Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. Rubber is a strong, flexible material that provides good insulation and shock absorption. A hardness measurement of 70 shore a means the material has a hard surface for good penetration and wear resistance. Wear resistance is the degree to which the rubber resists abrasion. A higher number means the material is harder and more resistant to penetration. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. The black sbr rubber sheet is 70 shore a and has a smooth finish. A lower number means the material is softer and more flexible. Some types of rubber may be weather or chemical resistant and withstand high temperatures. Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance.

 

SBR Styrene Butadiene Rubber Sheet 60 Shore A Black Smooth Finish No Backing 0187 Thickness 2 Width 36 Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 0.187″ Thickness, 2″ Width, 36″ Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 0.187″ Thickness, 2″ Width, 36″ Length - The black sbr rubber sheet is 60 shore a and has a smooth finish. Rubber is a strong, flexible material that provides good insulation and shock absorption. Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. Wear resistance is the degree to which the rubber resists abrasion. A lower number means the material is softer and more flexible. A hardness measurement of 60 shore a means the material has a medium-hard surface that has a balance of good penetration resistance with good bending and forming capability. A higher number means the material is harder and more resistant to penetration. Some types of rubber may be weather or chemical resistant and withstand high temperatures. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks.

 

SBR Styrene Butadiene Rubber Sheet 60 Shore A Black Smooth Finish No Backing 12 Thickness 6 Width 36 Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 1/2″ Thickness, 6″ Width, 36″ Length

SBR (Styrene Butadiene Rubber) Sheet, 60 Shore A, Black, Smooth Finish, No Backing, 1/2″ Thickness, 6″ Width, 36″ Length - Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. Wear resistance is the degree to which the rubber resists abrasion. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Rubber is a strong, flexible material that provides good insulation and shock absorption. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. A lower number means the material is softer and more flexible. A hardness measurement of 60 shore a means the material has a medium-hard surface that has a balance of good penetration resistance with good bending and forming capability. A higher number means the material is harder and more resistant to penetration. The black sbr rubber sheet is 60 shore a and has a smooth finish. Some types of rubber may be weather or chemical resistant and withstand high temperatures.

 

Rubber-Cal - Styrene Butadiene Rubber - SBR Rubber Sheet Rolls - 14 Thick x 36 Width x 36 Length

Rubber-Cal – Styrene Butadiene Rubber – (SBR) Rubber Sheet & Rolls – 1/4″ Thick x 36″ Width x 36″ Length

Rubber-Cal – Styrene Butadiene Rubber – (SBR) Rubber Sheet & Rolls – 1/4″ Thick x 36″ Width x 36″ Length - Color is black. 70 shore a means the material is hard for good resistance to surface penetration and wear. Sbr provides good abrasion resistance. Smooth finish.

 

35-016-187-036-120 SBR Styrene Butadiene Rubber Sheet 0187 Thick 36 Width 120 Length Gray

35-016-187-036-120 SBR (Styrene Butadiene Rubber) Sheet, 0.187″ Thick, 36″ Width, 120″ Length, Gray

35-016-187-036-120 SBR (Styrene Butadiene Rubber) Sheet, 0.187″ Thick, 36″ Width, 120″ Length, Gray - The sbr rubber found in the gray sheet possesses good oil, ozone, and chemical resistance properties for your chosen projects. Gray sbr sheet is composed of both sbr rubber (styrene butadiene rubber) and natural rubber. Unlike black rubber, this gray sheet does not leave behind any unsightly marks or stains. In addition, the physical characteristics of gray sheet allow it to be used in various ways. This sheet rubber is popular for use in applications that need a non-marking material. This blended natural and sbr sheet rubber comes in a gray color, which provides for an alternative option to the standard black.

 

SBR Styrene Butadiene Rubber Sheet 70 Shore A Black Smooth Finish No Backing 0187 Thickness 6 Width 36 Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 0.187″ Thickness, 6″ Width, 36″ Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 0.187″ Thickness, 6″ Width, 36″ Length - Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. Wear resistance is the degree to which the rubber resists abrasion. A higher number means the material is harder and more resistant to penetration. A hardness measurement of 70 shore a means the material has a hard surface for good penetration and wear resistance. The black sbr rubber sheet is 70 shore a and has a smooth finish. Rubber is a strong, flexible material that provides good insulation and shock absorption. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. Some types of rubber may be weather or chemical resistant and withstand high temperatures. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. A lower number means the material is softer and more flexible.

 

SBR Styrene Butadiene Rubber Sheet 70 Shore A Black Smooth Finish No Backing 0187 Thickness 6 Width 6 Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 0.187″ Thickness, 6″ Width, 6″ Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 0.187″ Thickness, 6″ Width, 6″ Length - The black sbr rubber sheet is 70 shore a and has a smooth finish. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. A higher number means the material is harder and more resistant to penetration. Wear resistance is the degree to which the rubber resists abrasion. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. A lower number means the material is softer and more flexible. Rubber is a strong, flexible material that provides good insulation and shock absorption. A hardness measurement of 70 shore a means the material has a hard surface for good penetration and wear resistance. Some types of rubber may be weather or chemical resistant and withstand high temperatures. Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance.

 

SBR Styrene Butadiene Rubber Sheet 70 Shore A Black Smooth Finish No Backing 0125 Thickness 12 Width 24 Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 0.125″ Thickness, 12″ Width, 24″ Length

SBR (Styrene Butadiene Rubber) Sheet, 70 Shore A, Black, Smooth Finish, No Backing, 0.125″ Thickness, 12″ Width, 24″ Length - A hardness measurement of 70 shore a means the material has a hard surface for good penetration and wear resistance. Wear resistance is the degree to which the rubber resists abrasion. Hardness is measured with scales shore d, shore oo, and shore a, which is the most common scale. Rubber is a strong, flexible material that provides good insulation and shock absorption. A lower number means the material is softer and more flexible. The black sbr rubber sheet is 70 shore a and has a smooth finish. Sbr (styrene butadiene rubber) is a synthetic rubber that provides good abrasion resistance. Some types of rubber may be weather or chemical resistant and withstand high temperatures. A higher number means the material is harder and more resistant to penetration. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks.

 

35-016-125-006-036 SBR Styrene Butadiene Rubber Sheet 0125 Thick 6 Width 36 Length Gray

35-016-125-006-036 SBR (Styrene Butadiene Rubber) Sheet, 0.125″ Thick, 6″ Width, 36″ Length, Gray

35-016-125-006-036 SBR (Styrene Butadiene Rubber) Sheet, 0.125″ Thick, 6″ Width, 36″ Length, Gray - The sbr rubber found in the gray sheet possesses good oil, ozone, and chemical resistance properties for your chosen projects. In addition, the physical characteristics of gray sheet allow it to be used in various ways. This sheet rubber is popular for use in applications that need a non-marking material. Unlike black rubber, this gray sheet does not leave behind any unsightly marks or stains. Gray sbr sheet is composed of both sbr rubber (styrene butadiene rubber) and natural rubber. This blended natural and sbr sheet rubber comes in a gray color, which provides for an alternative option to the standard black.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.