Best 16 Carbon Silicon Carbides

 

CSI WK1-60-DM-2Y Seal Kit for Use with U1 Type Pumps VitonCarbonSilicon Carbide Black

CSI WK1-60-DM-2Y Seal Kit for Use with U1 Type Pumps, Viton/Carbon/Silicon Carbide, Black

CSI WK1-60-DM-2Y Seal Kit for Use with U1 Type Pumps, Viton/Carbon/Silicon Carbide, Black - This seal kit is used for repairs and preventive maintenance on waukesha, ampco or wright model u1 size 6, 15, and 18 pumps with carbon vs. Contains shaft seals, o-rings, and casing gasket. Silicon carbide double mechanical seals and viton elastomers.

 

MP Pumps 37898  Chemflo 9 End Suction Centrifugal Pump 316 Stainless Steel Pedestal 995 Impeller Mechanical Seal with a Double Convolution with Carbon Silicon Carbide Seal 2 x 1

MP Pumps 37898 Chemflo 9 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 9.95″ Impeller, Mechanical Seal with a Double Convolution, with Carbon Silicon Carbide Seal, 2″ x 1″

MP Pumps 37898 Chemflo 9 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 9.95″ Impeller, Mechanical Seal with a Double Convolution, with Carbon Silicon Carbide Seal, 2″ x 1″ - Made with high quality investment cast 316 stainless steel components, the chemflo series of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required. Electric and hydraulic motors can be close coupled to chemflo 9 pumps or pedestal mounted versions are also available for long coupling. Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / viton mechanical seal. The chemflo 9 pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Chemflo 9 pumps are offered in two configurations, pump (with motor) and pump ak (without motor) versions. Multiple impeller trims allow the chemflo 9 to meet most duty points up to 270 gpm and total head up to 460 feet.

 

MP Pumps 38200 Chemflo 1 End Suction Centrifugal Pump 316 Stainless Steel Closed Couple 56C 05 hp 3 Phase Motor 60 Impeller Carbon Silicon Carbide Seal 1-12 x 1

MP Pumps 38200 Chemflo 1 End Suction Centrifugal Pump, 316 Stainless Steel, Closed Couple 56C, 0.5 hp, 3 Phase Motor, 6.0″ Impeller, Carbon Silicon Carbide Seal, 1-1/2″ x 1″

MP Pumps 38200 Chemflo 1 End Suction Centrifugal Pump, 316 Stainless Steel, Closed Couple 56C, 0.5 hp, 3 Phase Motor, 6.0″ Impeller, Carbon Silicon Carbide Seal, 1-1/2″ x 1″ - Further expanding the versatility of the chemfloseries is the cfb 1 pump, a chemflo1 in nibral material. Chemflo1 pumps are offered in two configurations, pump (with motor) and pump ak(without motor) versions. Electric and hydraulic motors can be close coupled to chemflo1 pumps or pedestal mounted versions are also available for long coupling. The chemflo1 pumps utilize a semi-open impeller design to allow for passage of larger solid sizes than similar sized enclosed impellers. Several seal options are available in addition to the standard type 2100 carbon / ceramic / viton mechanical seal. All wetted parts are produced in ca 958 nickel aluminum bronze including the drive sleeve to maximize corrosion protection in seawater applications. Made with high quality investment cast 316 stainless steel components, the chemfloseries of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required.

 

CSI WK1-220-SM-2U Seal Kit for Use with U1 Type Pumps BunaCarbonSilicon Carbide Black

CSI WK1-220-SM-2U Seal Kit for Use with U1 Type Pumps, Buna/Carbon/Silicon Carbide, Black

CSI WK1-220-SM-2U Seal Kit for Use with U1 Type Pumps, Buna/Carbon/Silicon Carbide, Black - Silicon carbide single mechanical seals and buna elastomers. This seal kit is used for repairs and preventive maintenance on waukesha, ampco or wright model u1 size 220 pumps with carbon vs. Contains shaft seals, o-rings, and casing gasket.

 

Mesco Corp replacement kit for Paco K141-F - EPRCARBONSILICON CARBIDE

Mesco Corp replacement kit for Paco K141-F – EPR/CARBON/SILICON CARBIDE

Mesco Corp replacement kit for Paco K141-F – EPR/CARBON/SILICON CARBIDE - Oem quality at a fraction of the oem price. Our products meet or exceed oem specs. All of our products are in stock ready to ship.

 

CSI WK1-6-SM-2Y Seal Kit for Use with U1 Type Pumps VitonCarbonSilicon Carbide Black

CSI WK1-6-SM-2Y Seal Kit for Use with U1 Type Pumps, Viton/Carbon/Silicon Carbide, Black

CSI WK1-6-SM-2Y Seal Kit for Use with U1 Type Pumps, Viton/Carbon/Silicon Carbide, Black - This seal kit is used for repairs and preventive maintenance on waukesha, ampco or wright model u1 size 6, 15, and 18 pumps with carbon vs. Contains shaft seals, o-rings, and casing gasket. Silicon carbide single mechanical seals and viton elastomers.

 

Mesco Corp replacement kit for Paco K104-F- EPRCARBONSILICON CARBIDE

Mesco Corp replacement kit for Paco K104-F- EPR/CARBON/SILICON CARBIDE

Mesco Corp replacement kit for Paco K104-F- EPR/CARBON/SILICON CARBIDE - Our products meet or exceed oem specs. All of our products are in stock ready to ship. Oem quality at a fraction of the oem price.

 

MP Pumps 039-38044 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel Pedestal 525 Impeller Carbon Silicon Carbide SealEthylene Propylene Vertical Discharge 3 x 2

MP Pumps 039-38044 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 5.25″ Impeller, Carbon Silicon Carbide Seal/Ethylene Propylene, Vertical Discharge, 3″ x 2″

MP Pumps 039-38044 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 5.25″ Impeller, Carbon Silicon Carbide Seal/Ethylene Propylene, Vertical Discharge, 3″ x 2″ - The chemflo 6 pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Chemflo 6 pumps are offered in two configurations, pump (with motor) and pump ak (without motor) versions. Multiple impeller trims allow the chemflo 6 to meet most duty points up to 500 gpm and total head up to 157 feet. Made with high quality investment cast 316 stainless steel components, the chemflo series of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required. Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / viton mechanical seal. Electric and hydraulic motors can be close coupled to chemflo 6 pumps or pedestal mounted versions are also available for long coupling.

 

MP Pumps 039-38490 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel Pedestal 618 Impeller Carbon Silicon Carbide SealEthylene Propylene Vertical Discharge 3 x 2

MP Pumps 039-38490 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 6.18″ Impeller, Carbon Silicon Carbide Seal/Ethylene Propylene, Vertical Discharge, 3″ x 2″

MP Pumps 039-38490 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 6.18″ Impeller, Carbon Silicon Carbide Seal/Ethylene Propylene, Vertical Discharge, 3″ x 2″ - Chemflo 6 pumps are offered in two configurations, pump (with motor) and pump ak (without motor) versions. The chemflo 6 pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Made with high quality investment cast 316 stainless steel components, the chemflo series of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required. Electric and hydraulic motors can be close coupled to chemflo 6 pumps or pedestal mounted versions are also available for long coupling. Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / viton mechanical seal. Multiple impeller trims allow the chemflo 6 to meet most duty points up to 500 gpm and total head up to 157 feet.

 

MP Pumps 039-36118 Chemflo 1 End Suction Centrifugal Pump 316 Stainless Steel Closed Couple 56C 2 hp 3 Phase Motor Carbon Silicon Carbide Seal Baldor 1-12 x 1

MP Pumps 039-36118 Chemflo 1 End Suction Centrifugal Pump, 316 Stainless Steel, Closed Couple 56C, 2 hp, 3 Phase Motor, Carbon Silicon Carbide Seal (Baldor), 1-1/2″ x 1″

MP Pumps 039-36118 Chemflo 1 End Suction Centrifugal Pump, 316 Stainless Steel, Closed Couple 56C, 2 hp, 3 Phase Motor, Carbon Silicon Carbide Seal (Baldor), 1-1/2″ x 1″ - Chemflo1 pumps are offered in two configurations, pump (with motor) and pump ak(without motor) versions. Made with high quality investment cast 316 stainless steel components, the chemfloseries of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required. Further expanding the versatility of the chemfloseries is the cfb 1 pump, a chemflo1 in nibral material. The chemflo1 pumps utilize a semi-open impeller design to allow for passage of larger solid sizes than similar sized enclosed impellers. Electric and hydraulic motors can be close coupled to chemflo1 pumps or pedestal mounted versions are also available for long coupling. All wetted parts are produced in ca 958 nickel aluminum bronze including the drive sleeve to maximize corrosion protection in seawater applications. Several seal options are available in addition to the standard type 2100 carbon / ceramic / viton mechanical seal.

 

CSI WK1-220-DM-2Y Seal Kit for Use with U1 Type Pumps VitonCarbonSilicon Carbide Black

CSI WK1-220-DM-2Y Seal Kit for Use with U1 Type Pumps, Viton/Carbon/Silicon Carbide, Black

CSI WK1-220-DM-2Y Seal Kit for Use with U1 Type Pumps, Viton/Carbon/Silicon Carbide, Black - Silicon carbide double mechanical seals and viton elastomers. This seal kit is used for repairs and preventive maintenance on waukesha, ampco or wright model u1 size 220 pumps with carbon vs. Contains shaft seals, o-rings, and casing gasket.

 

MP Pumps 35045 Chemflo 2 End Suction Centrifugal Pump 316 Stainless Steel Pump Pack 41 Impeller Ethylene PropyleneCarbon Silicon Carbide Seals and Gaskets 1-12 x 1

MP Pumps 35045 Chemflo 2 End Suction Centrifugal Pump, 316 Stainless Steel, Pump Pack, 4.1″ Impeller, Ethylene Propylene/Carbon Silicon Carbide Seals and Gaskets, 1-1/2″ x 1″

MP Pumps 35045 Chemflo 2 End Suction Centrifugal Pump, 316 Stainless Steel, Pump Pack, 4.1″ Impeller, Ethylene Propylene/Carbon Silicon Carbide Seals and Gaskets, 1-1/2″ x 1″ - Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / viton mechanical seal. Chemflo 2 pumps are offered in two configurations, pump (with motor) and pump ak (without motor) versions. The chemflo 2 pumps utilize a semi open impeller design to allow for passage of larger solid sizes than similar sized enclosed impellers. Further expanding the versatility of the chemflo series is the cfb 2 pump, a chemflo 2 in nibral material. Made with high quality investment cast 316 stainless steel components, the chemflo series of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required. Electric and hydraulic motors can be close coupled to chemflo 2 pumps or pedestal mounted versions are also available for long coupling. All wetted parts are produced in ca 958 nickel aluminum bronze including the drive sleeve to maximize corrosion protection in seawater applications.

 

1432 cylindrical grinding wheel piece of green carbon silicon carbide white corundum 40050203

1432 cylindrical grinding wheel piece of green carbon silicon carbide white corundum 40050203

1432 cylindrical grinding wheel piece of green carbon silicon carbide white corundum 40050203 - 1432 cylindrical grinding wheel piece of green carbon silicon carbide white corundum 40050203 grinding wheel (521001489250) (117072807).

 

MP Pumps 37068  Chemflo 9 End Suction Centrifugal Pump 316 Stainless Steel Pedestal 865 Impeller Mechanical Seal with a Double Convolution with Carbon Silicon Carbide Seal 2 x 1

MP Pumps 37068 Chemflo 9 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 8.65″ Impeller, Mechanical Seal with a Double Convolution, with Carbon Silicon Carbide Seal, 2″ x 1″

MP Pumps 37068 Chemflo 9 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 8.65″ Impeller, Mechanical Seal with a Double Convolution, with Carbon Silicon Carbide Seal, 2″ x 1″ - Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / viton mechanical seal. Multiple impeller trims allow the chemflo 9 to meet most duty points up to 270 gpm and total head up to 460 feet. Chemflo 9 pumps are offered in two configurations, pump (with motor) and pump ak (without motor) versions. Electric and hydraulic motors can be close coupled to chemflo 9 pumps or pedestal mounted versions are also available for long coupling. The chemflo 9 pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Made with high quality investment cast 316 stainless steel components, the chemflo series of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required.

 

Mesco Corp replacement kit for Paco K105-F - EPRCARBONSILICON CARBIDE

Mesco Corp replacement kit for Paco K105-F – EPR/CARBON/SILICON CARBIDE

Mesco Corp replacement kit for Paco K105-F – EPR/CARBON/SILICON CARBIDE - Oem quality at a fraction of the oem price. Our products meet or exceed oem specs. All of our products are in stock ready to ship.

 

MP Pumps 37994 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel Pedestal 46 Impeller Carbon Silicon Carbide SealEthylene Propylene Vertical Discharge 3 x 2

MP Pumps 37994 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 4.6″ Impeller, Carbon Silicon Carbide Seal/Ethylene Propylene, Vertical Discharge, 3″ x 2″

MP Pumps 37994 Chemflo 6 End Suction Centrifugal Pump 316 Stainless Steel, Pedestal, 4.6″ Impeller, Carbon Silicon Carbide Seal/Ethylene Propylene, Vertical Discharge, 3″ x 2″ - Electric and hydraulic motors can be close coupled to chemflo 6 pumps or pedestal mounted versions are also available for long coupling. Made with high quality investment cast 316 stainless steel components, the chemflo series of pumps are designed to be applied in a wide range of pumping applications where stainless steel is required. Multiple impeller trims allow the chemflo 6 to meet most duty points up to 500 gpm and total head up to 157 feet. Several mechanical seal options are available in addition to the standard type 2100 carbon / ceramic / viton mechanical seal. The chemflo 6 pumps utilize an enclosed impeller designed for achieving higher heads and efficiencies than a standard semi-open impeller. Chemflo 6 pumps are offered in two configurations, pump (with motor) and pump ak (without motor) versions.