25 Top M4 Metrics

 

M4 Metric Lock Washers Din 127-B Zinc 100 Pack

M4 Metric Lock Washers Din 127-B Zinc 100 Pack

M4 Metric Lock Washers Din 127-B Zinc 100 Pack - Quick shipping. New. Personalized customer service.

 

M4-07  4mm - Metric Nylon Insert Hex Lock Nut DIN 985 - A2-70  304  18-8 Stainless Steel - MonsterBolts 100

M4-0.7 / 4mm – Metric Nylon Insert Hex Lock Nut DIN 985 – A2-70 / 304 / 18-8 Stainless Steel – MonsterBolts (100)

M4-0.7 / 4mm – Metric Nylon Insert Hex Lock Nut DIN 985 – A2-70 / 304 / 18-8 Stainless Steel – MonsterBolts (100) - 7 nylon insert lock nuts in stainless steel., M4 / 4mm nylon insert lock nuts in stainless steel metric size m4 / 4mm type nylon insert lock nut specification din 985 thread pitch 0. These have a a2 grade rating. New metric m4-0. 7mm, coarse standard thread wrench size 7mm material stainless steel grade a2 / 18-8 / type 304.

 

M4 METRIC SELF-CLINCHING NUT QTY 100

M4 METRIC SELF-CLINCHING NUT (QTY 100)

M4 METRIC SELF-CLINCHING NUT (QTY 100) - Qty 100. Captive fasteners. M4 self clinching nut. Cap-spm4-0. Sp-m4-0.

 

M4 Metric hex nuts Stainless steel 18-8 A-2Diameter and Thread pitch 4mm x 07mm

M4 Metric hex nuts, Stainless steel 18-8 (A-2)Diameter and Thread pitch 4mm x 0.7mm

M4 Metric hex nuts, Stainless steel 18-8 (A-2)Diameter and Thread pitch 4mm x 0.7mm - Metric hex nuts, stainless steel 18-8 (a-2)nut size (a. The same is true of the thread pitch. 0 bolt. K. Metric hex nut diameter note image not to scale. A. Diameter) is the size bolt that the nut is used with. Thus a 6mm x 1. 0 nut fits a 6mm x 1.

 

Allied Titanium 0007275 Pack of 12 M4 Metric Titanium Flat Washer X 08mm Thick X 9mm OD Grade 2 CP

Allied Titanium 0007275, (Pack of 12) M4 Metric Titanium Flat Washer X 0.8mm Thick X 9mm OD, Grade 2 (CP)

Allied Titanium 0007275, (Pack of 12) M4 Metric Titanium Flat Washer X 0.8mm Thick X 9mm OD, Grade 2 (CP) - General tolerance +0/-036 mm. Meets asme grade 2 (cp) titanium with polished finish. Titanium is good for use in or near saltwater. True titanium(tm), stronger, lighter and corrosion free. M4 allied titanium flat washer x 08mm thick x 9mm outside diameter.

 

The Hillman Group 1433 M4 - Metric Split Lock Washer 160-Pack

The Hillman Group 1433 M4 – Metric Split Lock Washer 160-Pack

The Hillman Group 1433 M4 – Metric Split Lock Washer 160-Pack - It is round with a hole in the center and can be used where loosening from corrosion or vibration is a concern. This split lock washer provides a circular bearing surface with offset split ends which help bite into the mating material to provide a locking feature when tightened beneath a nut. Lock washers are commonly used in any application using a bolt where two pieces are being drawn together.

 

The Hillman Group 3393 M4 Metric Wing Nut 15-Pack

The Hillman Group 3393 M4 Metric Wing Nut, 15-Pack

The Hillman Group 3393 M4 Metric Wing Nut, 15-Pack - Use for any indoor/outdoor projects. Quantity per pack 15. This nut has a wing on each side that helps you to tighten the nut without tools. Wing nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often.

 

The Hillman Group 4123 M4 Metric Split Lock Washer 100-Pack

The Hillman Group 4123 M4 Metric Split Lock Washer (100-Pack)

The Hillman Group 4123 M4 Metric Split Lock Washer (100-Pack) - The called out size is the inner diameter of the washer. The split in the washers grips the material surface to prevent loosening during vibration. Split lock washers are the most common style of washer used to prevent nuts and bolts from coming loose. They are used in applications with nuts and bolts.

 

The Hillman Group 43890 M4 Metric SAE Flat Washer 70-Pack

The Hillman Group 43890 M4 Metric SAE Flat Washer, 70-Pack

The Hillman Group 43890 M4 Metric SAE Flat Washer, 70-Pack - Used in applications with nuts and bolts. Flat washers are commonly used in decks and fence building. The called out size is the inner diameter of the washer. The flat washer provides a greater bearing surface which helps prevent a nut or bolt head from tearing through the material.

 

Dormer E007M4 Spiral Flute Taps M4 Metric Coarse Full Length 218Flute Length 02484 Shank Diameter 01680

Dormer E007M4 Spiral Flute Taps, M4, Metric Coarse, Full Length 2.1/8″Flute Length 0.2484″, Shank Diameter 0.1680″

Dormer E007M4 Spiral Flute Taps, M4, Metric Coarse, Full Length 2.1/8″Flute Length 0.2484″, Shank Diameter 0.1680″ - Available in metric coarse (m) or metric fine (mf) right-hand thread options for different applications. Gold oxide finish reduces grinding stress within the tool. Spiral flute tap pulls chips back from the tip of the tool and out of the hole to prevent clogging. Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Spiral flutes for creating threads in blind holes.

 

M4 METRIC FLAT WASHER  DIN 125A  140 HV  ZINC CR3 FINISH  INCH  QUANTITY 1000

M4 METRIC FLAT WASHER | DIN 125A | 140 HV | ZINC CR+3 FINISH | INCH | (QUANTITY: 1000)

M4 METRIC FLAT WASHER | DIN 125A | 140 HV | ZINC CR+3 FINISH | INCH | (QUANTITY: 1000) - Trust in jet to deliver you high quality fasteners. Jet fitting & supply corporation has been selling metric din 125a flat washer, 140 hv, zinc cr+3 since 1946.

 

The Hillman Group 3624 M4 Metric Flat Washer 50-Pack

The Hillman Group 3624 M4 Metric Flat Washer, 50-Pack

The Hillman Group 3624 M4 Metric Flat Washer, 50-Pack - Steel/zinc plated. Quantity per pack 50. Flat washers are ideal for increasing the load bearing surface under a fastener’s head by distributing the load through the washer. These washers help to prevent bolts or nuts from pulling through a surface.

 

Dormer E005M43FL Spiral Point Taps M4 Metric Coarse Full Length 218Flute Length 02484 Shank Diameter 01680

Dormer E005M43FL Spiral Point Taps, M4, Metric Coarse, Full Length 2.1/8″Flute Length 0.2484″, Shank Diameter 0.1680″

Dormer E005M43FL Spiral Point Taps, M4, Metric Coarse, Full Length 2.1/8″Flute Length 0.2484″, Shank Diameter 0.1680″ - Spiral point and straight flutes for cutting threads in through holes. Spiral point pushes chips ahead of tool to reduce clogging. Plug chamfer for easier starting and correct perpendicular alignment. Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Gold oxide finish reduces grinding stress within the tool.

 

The Hillman Group 45560 M4 Metric Whiz Nut 60-Pack

The Hillman Group 45560 M4 Metric Whiz Nut, 60-Pack

The Hillman Group 45560 M4 Metric Whiz Nut, 60-Pack - Whiz-lock, one-piece, all-metal, free-spinning nuts have been proven to overcome vibration and a variety of other forces the underside, or bearing surface of the fastener, has a series of spiraling serrations, or teeth, to provide a locking, reliable hold the application of this nut is as simple as spinning it on.

 

The Hillman Group 43878 M4 Metric Fender Washer 40-Pack

The Hillman Group 43878 M4 Metric Fender Washer, 40-Pack

The Hillman Group 43878 M4 Metric Fender Washer, 40-Pack - They are chosen when a large outer diameter is required for an increased bearing surface and surface load reduction. Designed for auto body repair, fender washers are commonly used in sheet metal work, plumbing and electrical applications where a large washer diameter is needed. This fender washer is a flat washer with a thinner body and an increased outer diameter offering greater surface bearing.

 

The Hillman Group 3383 M4 - Metric Stop Nut Zinc Plated 16-Pack

The Hillman Group 3383 M4 – Metric Stop Nut Zinc Plated, 16-Pack

The Hillman Group 3383 M4 – Metric Stop Nut Zinc Plated, 16-Pack - The bolt threads into the nylon material are located at the top of the nut. The purpose of the nylon insert is to prevent backing off or loosening from vibration. Stop nuts are used for fastening to a bolt when mechanically joining materials together. Stop nuts are also known as nylon insert lock nuts.

 

M4 METRIC SELF-CLINCHING CAPTIVE STUD QTY 100

M4 METRIC SELF-CLINCHING CAPTIVE STUD (QTY 100)

M4 METRIC SELF-CLINCHING CAPTIVE STUD (QTY 100) - Cap-asm4-2. Captive fasteners. As-m4-2. Qty 100. M4 self clinching nut.

 

M4 METRIC SELF CLINCHING NUT ZINC PLATED CAP-SM4-2 QTY 100

M4 METRIC SELF CLINCHING NUT ZINC PLATED CAP-SM4-2 (QTY 100)

M4 METRIC SELF CLINCHING NUT ZINC PLATED CAP-SM4-2 (QTY 100) - S-m4-2zi. 4mm metric self clinching nut. Self-clinching fastener. Zinc plated.

 

M4 METRIC STAINLESS STEEL BROACHING SELF CLINCHING NUT QTY 100

M4 METRIC STAINLESS STEEL BROACHING SELF CLINCHING NUT (QTY 100)

M4 METRIC STAINLESS STEEL BROACHING SELF CLINCHING NUT (QTY 100) - Captive fasteners. M4 metric s/s broaching self clinching nut. Kfs2-m4. Cap-kfs2-m4. Qty 100.

 

Bluemoona 50 Pcs - 304 M4 Metric Thread Stainless Steel Button Head Hex Socket Cap Screws Bolts 16mm

Bluemoona 50 Pcs – 304 M4 Metric Thread Stainless Steel Button Head Hex Socket Cap Screws Bolts (16mm)

Bluemoona 50 Pcs – 304 M4 Metric Thread Stainless Steel Button Head Hex Socket Cap Screws Bolts (16mm) - Shaft length16mm head width 5mm(m5) head style hex head shapebutton head socket cap material stainless steel used for machinery ,industrial fasteners,home improvement,industrial & scientific,home & kitchen,sports & outdoors.

 

Dormer E006M4 Spiral Point Taps AlTiCN Coating M4 Metric CoarseMetric Fine Full Length 218 Flute Length 02484 Shank Diameter 01680

Dormer E006M4 Spiral Point Taps, AlTiCN Coating, M4, Metric Coarse/Metric Fine, Full Length 2.1/8″, Flute Length 0.2484″, Shank Diameter 0.1680″

Dormer E006M4 Spiral Point Taps, AlTiCN Coating, M4, Metric Coarse/Metric Fine, Full Length 2.1/8″, Flute Length 0.2484″, Shank Diameter 0.1680″ - Black oxide finish improves lubricity, resists corrosion, and helps prevent buildup. Spiral point and straight flutes for cutting threads in through holes. Powdered-metal steel for performance approaching that of solid carbide tools, with the toughness and shock-resistance of high-speed steel. Plug chamfer for easier starting and correct perpendicular alignment. Spiral point pushes chips ahead of tool to reduce clogging.

 

M4 Hex Flange Nuts 304 Stainless Steel Serrated Metric Stop Lock Nuts 30Pcs

M4 Hex Flange Nuts 304 Stainless Steel Serrated Metric Stop Lock Nuts 30Pcs

M4 Hex Flange Nuts 304 Stainless Steel Serrated Metric Stop Lock Nuts 30Pcs - Serrated flange nut helps to fasten and prevent loosening. High quality hex flange nuts,anti-rust and more durable. Widely used in home,industry,electronics,hardware,building,decoration,ect. They cannot be used with a washer or on surfaces that cannot be scratched. Warranty3 month warranty.

 

M4 METRIC SPLIT LOCK WASHERS  DIN 127  THRU-HARDENED  ZINC-BLUE CR3  QUANTITY 100

M4 METRIC SPLIT LOCK WASHERS | DIN 127 | THRU-HARDENED | ZINC-BLUE CR+3 | (QUANTITY: 100)

M4 METRIC SPLIT LOCK WASHERS | DIN 127 | THRU-HARDENED | ZINC-BLUE CR+3 | (QUANTITY: 100) - Type nylon insert lock nut. Wrench size 7mm. Thread pitch 07mm, coarse standard thread. Jet fitting & supply corporation has been providing fasteners since 1946 feel safe when buying from jet. Specification din 985.

 

200pcs M4 4mm Wave Stainless Steel Washer - DIN 137B 9mm Large Outer Diameter Shiny by BelMetric WW4BSS

(200pcs) M4, 4mm Wave Stainless Steel Washer – DIN 137B, 9mm Large Outer Diameter Shiny by BelMetric WW4BSS

(200pcs) M4, 4mm Wave Stainless Steel Washer – DIN 137B, 9mm Large Outer Diameter Shiny by BelMetric WW4BSS - 5mm standard din 137b, din 137-b, 137 type b material a1 stainless steel a1 stainless steel wave spring washers provide decent corrossion resistance under typical use where damp or wet conditions are present. A1 stainless steel is not recommended for highly corossive marine environments or applications where acid proof fasteners are required. 0mm material thickness 0. 3mm outer diameter 9mm height without compression 1. For bolt diameter 4mm inner diameter 4. Thread direction works with right or left handed screws and bolts 200 pieces per package. M4, 4mm stainless steel metric wavy spring washer this load bearing metal washer has an irregular shape that acts as a spring and compresses when tightened. Wave washers are commonly used to absorb shock, eliminate rattle and to help maintain tension within an assembly.

 

M4 Metric Din 7980 High Collar Split Lock Washer Thermal Black QUANTITY 10000 pcs

M4 Metric Din 7980 High Collar Split Lock Washer Thermal Black (QUANTITY: 10000 pcs)

M4 Metric Din 7980 High Collar Split Lock Washer Thermal Black (QUANTITY: 10000 pcs) - M4 high collar split lock washers | metric din 7980 | spring steel | thermal black o x ide (quantity 10000), diameter m4, length , high collar split lock washer.