24 Best and Coolest Access Control Readers

 

ZOTER Metal RFID ID Card 125KHz Password Code Non-Contact Proximity Access Control Controller Stand Alone Vandalproof Back Light Keypad Reader for Home Office House Silver

ZOTER Metal RFID ID Card 125KHz Password Code Non-Contact Proximity Access Control Controller Stand Alone Vandalproof Back Light Keypad Reader for Home Office House (Silver)

ZOTER Metal RFID ID Card 125KHz Password Code Non-Contact Proximity Access Control Controller Stand Alone Vandalproof Back Light Keypad Reader for Home Office House (Silver) - Built-in proximity card reader (125khz ask modulation). Metallic case for better protection. Support entry modes password only / id card only / password + id card. Support 1000 standard users. A reliable entrance guard allows you to live a convenient life so here we would like to recommend this acr-k7612 non-contact induction card entrance guard password card access controller to all of you you can use the induction card or enter password to get access to your building in an easier way our entrance guard can store up to 1000 private pins and accept 1000 cards in total come to take this helpful assistant home.

 

Isonas RC-03-PRX  PowerNet IP Access Control Reader-Controller Exposure rating IP56 No Keypad

Isonas RC-03-PRX | PowerNet IP Access Control Reader-Controller Exposure rating: IP56 (No Keypad)

Isonas RC-03-PRX | PowerNet IP Access Control Reader-Controller Exposure rating: IP56 (No Keypad) - A single reader is capable of storing 64,000 cardholders, 5,000 access events and 32 time zones all of which can be configured and accessed by an external host system | uses dhcp functionality or built-in call home function to seamlessly connect to the host computer to create a simple installation. First “pure ip” to the door solution | less expensive when compared to a traditional system | easily intregrates with other systems. Power over ethernet (poe), (ieee 8023af, class 0) | s232 interface to connect serial devices like pin pads and wiegand readers. Ip architecture allows management from a single computer | local mode allows funcation without a host (increasing response time, minimizes network traffic, reduces host loading time. Dimensions 1625″ x 6750″ x 940″ (mullion).

 

UHPPOTE Proximity Rfid Id Card Door Access Control Keypad Reader 125KHz Wiegand 26 Bit Color Black

UHPPOTE Proximity Rfid Id Card Door Access Control Keypad Reader 125KHz Wiegand 26 Bit Color Black

UHPPOTE Proximity Rfid Id Card Door Access Control Keypad Reader 125KHz Wiegand 26 Bit Color Black - 5 seconds reading range 3-15cm / 1. 39×0. 91in dimension 86x86x18mm / 3. 71in intput voltage dc9-16v max. (Please search asin b00ux02jwe to get the access control panel) package 1 x wiegand 26 bit card reader (as it is reader,manual not included) uhppote, is a registered trademark protected by the us trademark law. 18-5. 2 second proximity time distance less than 0. 70ma communication distance less than 100m/328ftcan’t work alone, need work with access control panel. Uhppote products are sold by uhppote amazon store only. Features frequency 125khz card type em-id card (can’t support some encrypted cards, such as hid, cobra, apcik etc) response speed less than 0. 39×3.

 

Access Control Reader ZOTER Waterproof Wiegand 2634 RFID 125Khz ID Card Reader for DIY Office Home Security System

Access Control Reader, ZOTER Waterproof Wiegand 26/34 RFID 125Khz ID Card Reader for DIY Office Home Security System

Access Control Reader, ZOTER Waterproof Wiegand 26/34 RFID 125Khz ID Card Reader for DIY Office Home Security System - 4. Product reference aca-wr26id-h106 specifications 125khz proximity card reader it’s a standard wiegand 26/34 bit reader read range up to 5cm external led control external buzzer control indoor / outdoor operation solid epoxy potted waterproof reverse polarity protection support rfid cards (em4100 standard id cards) note this rfid reader can’t work alone, need work with the access controller panel technical information product type access control reader output mode standard wiegand 26/34 bit format rfid cards supported em4100 standard id cards (id only, but not ic or mifare) input port 2ea (external led control, external buzzer control) led indicator -red standby state -green triggered state beeper yes read range up to 5 cm frequency 125 khz operating temperature -25 ~ 75°c operating humidity 10% to 90% relative humidity non-condensing power supply dc 12v, 70ma material abs + pc with texture dimension, approx. 9″ (h) inch package includes 1 x waterproof wiegand 26/34 bit rfid card reader. 7″ (l) x 3″(w) x 0. 119 (l) x 76 (w) x 23 (h) mm, approx.

 

Access Control Reader ZOTER Mini Micro Hidden Reader RFID IC Card 1356MHz Wiegand 26 Waterproof with Bracket

Access Control Reader, ZOTER Mini Micro Hidden Reader RFID IC Card 13.56MHz Wiegand 26 Waterproof with Bracket

Access Control Reader, ZOTER Mini Micro Hidden Reader RFID IC Card 13.56MHz Wiegand 26 Waterproof with Bracket - 86″ (height) inch wall mount dimension approx. 8″ (diameter) x 1″ (height) inch package includes 1 x mini micro wiegand 26 rfid ic reader with led light with metal wall mount. Technical information product type mini micro wiegand 26 bit rfid ic reader operating frequency 13. 56 mhz ic card built-in led with metal wall mount note this rfid reader can’t work alone, need work with the access controller panel important notice please note that “exit button”, “electric lock” and “dc 12v power supply” are not included in this package, please kindly refer to our store for all available accessories for access control. 1. 46 (diameter) x 25 (height) mm approx. Product reference aca-wr26ic-cp-z2mf+f1 specifications mini micro hidden rfid ic card reader waterproof support 13. 25 (diameter) x 22 (height) mm approx. 1″ (diameter) x 0. 56 mhz output mode standard wiegand 26 bit format type readable cards standard ic cards (include mifare classic 1k, 4k, ultralight) reader protocol ibutton (1-wire), wiegand 26 read range 0 ~ 3 cm maximum length of line from reader to controllerup to 15m power supply dc 8 ~ 18 v current consumption 35 ma light indication red led external control of leds and buzzer no casing material abs plastic with coating reader dimension approx.

 

Access Control Reader ZOTER ID IC 125KHz 1356MHz RFID Card Reader Wiegand 2634 Bit for DIY Office Home Security System

Access Control Reader, ZOTER ID IC 125KHz 13.56MHz RFID Card Reader Wiegand 26/34 Bit for DIY Office Home Security System

Access Control Reader, ZOTER ID IC 125KHz 13.56MHz RFID Card Reader Wiegand 26/34 Bit for DIY Office Home Security System - Note this rfid reader can’t work alone, need work with the access controller panel. 1356mhz proximity ic card reader. Support rfid cards (em4100 standard id cards and ic cards). 125khz proximity id card reader. It’s a standard wiegand 26/34 bit reader.

 

125Khz EM41004102 ID Access Control Reader Wiegand 26 Dual Led Reliable RF Reader

125Khz EM4100/4102 ID Access Control Reader Wiegand 26 Dual Led Reliable RF Reader

125Khz EM4100/4102 ID Access Control Reader Wiegand 26 Dual Led Reliable RF Reader - Operating temperature -10~60 degree. Maximum cable distance to controller 100m. Interface wiegand 26. Operating voltage range 9~16 vdc. Type of cable 8 wires shielded cable, 22 awg. Be convenient to install and use. Specifications. Card read distance up to 12 cm. Size 1037517mm. Built-in audible buzzer acknowledging card reading and bicolor led acknowledging access. Frequency125khz. Card typeem/id. Reader consumption standby 85ma, read 100ma.

 

125KHz Weatherproof Wiegand 26 RFID EM-ID Card Proximity Door Access Control Reader

125KHz Weatherproof Wiegand 26 RFID EM-ID Card Proximity Door Access Control Reader

125KHz Weatherproof Wiegand 26 RFID EM-ID Card Proximity Door Access Control Reader - Response speed less than 02 second. Card type em-id card (can’t support encrypted cards, such as hid, cobra, apcik etc). Type wiegand 26-bit frequency 125khz. Communication distance less than 100m. It is reader,can’t work alone, need work with access control board.

 

Metal Fingerprint Access ControlReader FAS-SB-01SF 125 KHz kit with Linear AM3 Controller Push Button H-PB4RE and Power Supply Transformer

Metal Fingerprint Access Control/Reader FAS-SB-01SF 125 KHz kit with Linear AM3 Controller, Push Button H-PB4RE and Power Supply Transformer

Metal Fingerprint Access Control/Reader FAS-SB-01SF 125 KHz kit with Linear AM3 Controller, Push Button H-PB4RE and Power Supply Transformer - Power supply 12 volt 125 amp transformer/switching adapter produces a consistent 12 volt power supply for electronics cut the cord and wire directly to your locking device. Fingerprint access control / reader the fas-sb-01sf 125 khz metal fingerprint access control/reader takes design inspiration form the supercar specially designed for the high-end market can be used as controller and reader to suit for different kinds of needs of the customer. Push button stainless steel face plate fas hpb4rer large round red request to exit button. Linear am3 controller linear am3 plus is an access controller for up to four points of entry, the am3 plus is housed in a lockable, plastic enclosure that is monitored with a magnetic tamper switch.

 

Access Control Reader ZOTER Mini Micro Hidden Reader RFID IC Card 1356MHz Wiegand 26 Embedded Waterproof

Access Control Reader, ZOTER Mini Micro Hidden Reader RFID IC Card 13.56MHz Wiegand 26 Embedded Waterproof

Access Control Reader, ZOTER Mini Micro Hidden Reader RFID IC Card 13.56MHz Wiegand 26 Embedded Waterproof - Waterproof rate for indoor or outdoor use and works with wiegand 26 data format. Embedded installation. Note this rfid reader can’t work alone, need work with the access controller panel. Please note that “exit button”, “electric lock” and “dc 12v power supply” are not included in this package, please kindly refer to our store for all available accessories for access control. This is a mini rfid reader that works with an access control card or a key fob to allow or disallow entrance through a door with no need for contact.

 

FCARD Fingerprint Access Controller and RFID 125KHz Card Reader Door Lock System Fingerprint Reader

FCARD Fingerprint Access Controller and RFID 125KHz Card Reader Door Lock System Fingerprint Reader

FCARD Fingerprint Access Controller and RFID 125KHz Card Reader Door Lock System Fingerprint Reader - It supports id card, fingerprint and password to open the door supports usb data backup and data recovery functions etc. Detailed description operating voltage dc9-15v operating current . With its classic european design style, standard wiegand protocol, it can be used with any supporting wiegand access controller in the market. Ltd. Fc-9088 is fingerprint access control product based on the latest algorithm launched by fcard electronics co. In 2015. , Suitable for government, military, banks, offices, computer room and various places with all security levels, and is another boutique application in security engineering.

 

HID ThinLine II Black Wall Mount Access Control Reader Lifetime Warranty

HID ThinLine II Black Wall Mount Access Control Reader, Lifetime Warranty

HID ThinLine II Black Wall Mount Access Control Reader, Lifetime Warranty - 5 amps dc (ma) 30 ~ 110 volts dc5 ~ 16 frequency (khz) 125 warrantylifetime. 5″ reader typewall switch card size (#bits) up to 85 card compatibility125 khz dimensions4. 0″ ~ 5. 0 x 0. 68 cable distance500 ft (150 m) 22 awg certificationul294, fcc, eu, cb, srd, emc, ce, c-tick mountwall switch operating humidity0 ~ 95% operating temperature (f) -22° ~ 150° product colorblack outdooryes weight (oz) 3. 7 x 3. Read range2.

 

Metal Fingerprint Access ControlReader FAS-SB-01SF 125 KHz kit with Push Button H-PB4RE and Power Supply Transformer

Metal Fingerprint Access Control/Reader FAS-SB-01SF 125 KHz kit with Push Button H-PB4RE and Power Supply Transformer

Metal Fingerprint Access Control/Reader FAS-SB-01SF 125 KHz kit with Push Button H-PB4RE and Power Supply Transformer - 25 amp transformer/switching adapter produces a consistent 12 volt power supply for electronics. Power supply / transformer (1. 25ma) additional product information fas-sb-01sf fingerprint access control / reader the fas-sb-01sf 125 khz metal fingerprint access control/reader takes design inspiration form the supercar. 25ma power supply transformer. Cut the cord and wire directly to your locking device. Kit includes • 1 fas-sb-01sf fingerprint access control/reader • 1 h-pb4re push button • 1 power supply/transformer (1. 25ma) 12 volt 1. Specially designed for the high-end market. Can be used as controller and reader to suit for different kinds of needs of the customer. This kit offers you a finger print access control / reader, a push to exit button and a 1. You may add a remote / receiver, motion sensor, brackets, intercome, timer, and magnetic lock. H-pb4re push button stainless steel face plate fas hpb4rer large round red request to exit button.

 

HID ProxPoint Plus Grey Mini Mullion Access Control Reader

HID ProxPoint Plus Grey Mini Mullion Access Control Reader

HID ProxPoint Plus Grey Mini Mullion Access Control Reader - 7 oz, dimensions (h” x w” x d”) 3. The proximity reader has a 125 khz transmit frequency, and enables various beeper and led configurations, depending on your site needs. The device is compatible with most access control systems and can be mounted directly on metal without affecting read range performance. 0″, reader type mini-mullion, card size (#bits) up to 85, card compatibility 125 khz, connectors termination pigtail, physical specifications product color grey, certification ul294, fcc, eu, cb, srd, emc, ce, c-tick, mount mullion, outdoor yes, operating temperature (f) -22° ~ 150°, weight 2. 7 x 0. 13 x 1. 0″ to 3. 66, cable distance 500 ft (150 m) 22 awg, power specifications amps dc (ma) 30 ~ 75, voltage dc 5 ~ 16, warranty warranty (years) lifetime, wireless specifications frequency (khz) 125. The hid proxpoint plus mini mullion reader is cost-effective and provides reliable performance. Access control specifications read range 1. This compact hid proxpoint plus black mini mullion access control reader mounts easily, features potted electronics and is designed to be used indoors-or outdoors. A proximity reader is part of an overall access control solution that would also include a door controller, door hardware and accessories.

 

OBO Hands RFID KEYPAD 125KHz RFID keychains  Standalone Keypad RFID ReaderEpoxy Rfid Tag for Door Access Control System K2000

OBO Hands RFID KEYPAD 125KHz RFID keychains + Standalone Keypad RFID Reader+Epoxy Rfid Tag for Door Access Control System K2000

OBO Hands RFID KEYPAD 125KHz RFID keychains + Standalone Keypad RFID Reader+Epoxy Rfid Tag for Door Access Control System K2000 - Features high quality and high security sensitively and response quickly classical appearance with useful function designed for home and office can add card number and delete card number as your requirement specification voltage 12vdc current 120ma user capacity 500 users pin capacity 4-digits proximity reader frequency 125khz compatible cards em or em compatible card (can’t support some encrypted cards,such as hid, cobra, apcik etc) external reader not support card reading distance 5-10cm dimension 4. 8 inch door open options id card (key ring) only / password only / id card (key ring) + password package 1 x rfid access controller 1 x user manual 10 x rfid keychains. 6×0. 6×4.

 

HID ProxPro Gray Wall Mount Access Control Reader with Keypad Lifetime Warranty

HID ProxPro Gray Wall Mount Access Control Reader with Keypad, Lifetime Warranty

HID ProxPro Gray Wall Mount Access Control Reader with Keypad, Lifetime Warranty - 0 x 1. 0 amps dc (ma) 100 ~ 120 volts dc5 ~ 16 frequency (khz) 125 terminationterminal warrantylifetime. 0 x 5. 0″ reader typewall switch card size (#bits) up to 84 card compatibility125 khz dimensions5. 0 cable distance500 ft (150 m) 22 awg certificationul294, fcc, eu, cb, srd, emc, ce, c-tick constructionpolycarbonate ul 94 mountwall switch operating humidity0 ~ 95% operating temperature (f) -22 ~ 150 product colorgray outdooryes weight (oz) 12. Read range3. 0″ ~ 8.

 

HID ProxPro Access Control Wall Mount Access Control Reader Lifetime Warranty

HID ProxPro Access Control Wall Mount Access Control Reader, Lifetime Warranty

HID ProxPro Access Control Wall Mount Access Control Reader, Lifetime Warranty - 0 x 1. 0 x 5. Read range3. 0″ reader typewall switch card size (#bits) up to 84 card compatibility125 khz dimensions5. 5 frequency (khz) 125 terminationterminal warrantylifetime. 0 cable distance500 ft (150 m) 22 awg certificationul294, fcc, eu, cb, srd, emc, ce, c-tick constructionpolycarbonate ul 94 mountwall switch operating humidity0 ~ 95% operating temperature (f) -22° ~ 150° product colorgray outdooryes weight (oz) 12. 0 amps dc (ma) 100 ~ 120 volts dc10 ~ 28. 0″ ~ 8.

 

KKmoon Weatherproof 1356MHz Wiegand 26  34 Access Control Keypad RFID Reader Color Black

KKmoon Weatherproof 13.56MHz Wiegand 26 / 34 Access Control Keypad RFID Reader Color Black

KKmoon Weatherproof 13.56MHz Wiegand 26 / 34 Access Control Keypad RFID Reader Color Black - Waterproof standard for outdoor use. Overview it is a 13. Access ways card, pin, card + pin wiegand26/wiegand34 output format optional. Features 13. 56mhz reading time. It has received high sensitivity, current, single dc power supply, low price, high performance characteristics. Dust, moisture, fully sealed design allows users to install the outdoor and other harsh conditions, no mechanical wear and durability. 56mhz transmission frequency, 0-10cm reading distance. Built-in buzzer and touch button. Specifications frequency13. 56mhz contactless access control reader, featuring advanced rf receiver circuit design and embedded micro-controller, combined with efficient decoding algorithms. Can not work alone, need to work with access control panel.

 

Access Control Board ZOTER Mini Door Control Panel with DIY Hidden Waterproof RFID IC Card Reader 1356MHz for Security System Electrical Door Lock

Access Control Board, ZOTER Mini Door Control Panel with DIY Hidden Waterproof RFID IC Card Reader 13.56MHz for Security System Electrical Door Lock

Access Control Board, ZOTER Mini Door Control Panel with DIY Hidden Waterproof RFID IC Card Reader 13.56MHz for Security System Electrical Door Lock - Operating frequency 1356mhz. Aca-wr26ic-cp-z2mf+z-5r controller allows to connect the reader, lock opening button, door opening sensor, electromagnetic or electromechanical lock, external led, external buzzer. Four-operation mode. Aca-wr26ic-cp-z2mf+z-5r mini standalone access controller is almost the smallest standalone access controller in the world, it has special designed for management of the electronic lock mini dimension allows to install it inside the lock as a board, as well as separately in the case. The mini access control is the standalone controller designed for management of the electric locks controller dimensions allows to install it inside the lock as a board.

 

HID ThinLine II Grey Wall Mount Access Control Reader

HID ThinLine II Grey Wall Mount Access Control Reader

HID ThinLine II Grey Wall Mount Access Control Reader - Access control specifications read range 2. 68, cable distance 500 ft (150 m) 22 awg, power specifications amps dc (ma) 30 ~ 110, voltage dc 5 ~ 16, warranty warranty (years) lifetime, wireless specifications frequency (khz) 125. It is easy to install, has a consistent read range, does not consume a lot of power and provides a reliable access control solution. 7 x 3. The hid thinline ii grey wall mount access control reader features a two-piece potted weatherproof enclosure that is able to withstand the elements and can be mounted indoors or out. Switch plates. A proximity reader is part of an overall access control solution that would also include a door controller, door hardware and accessories. 0″ to 5. The wall-mountable reader is the size of most standard u. 5 oz, dimensions (h” x w” x d”) 4. S. 5″, reader type wall switch, card size (#bits) up to 84, card compatibility 125 khz, physical specifications product color grey, certification ul294, fcc, eu, cb, srd, emc, ce, c-tick, mount wall switch, outdoor yes, operating temperature (f) -22° ~ 150°, weight 3. 0 x 0.

 

Velleman HAA2890 Dual Relay Digital Access Control Reader Keypad 1 Grade to 12 Grade 663 Height 183  Wide 094 Length ABS Weatherproof

Velleman HAA2890 Dual Relay Digital Access Control Reader Keypad, 1 Grade to 12 Grade, 6.63″ Height, 1.83 ” Wide, 0.94″ Length, ABS, Weatherproof

Velleman HAA2890 Dual Relay Digital Access Control Reader Keypad, 1 Grade to 12 Grade, 6.63″ Height, 1.83 ” Wide, 0.94″ Length, ABS, Weatherproof - Durable epoxy coated back-lit key board with doorbell button. Self-contained, stand-alone operation. Built-in data i/o port expandable for split-decoded operation. Operated with pin codes & em cards. Vertical mount weatherproof plastic housing.

 

Tiptiper RFID Door Access Control Readers EM ID Card Waterproof Waterproof Up to 80 mm

Tiptiper RFID Door Access Control Readers EM ID Card Waterproof Waterproof Up to 80 mm

Tiptiper RFID Door Access Control Readers EM ID Card Waterproof Waterproof Up to 80 mm - 7cm. 2 x 1. Specificationcolour blackmaterial absmodel hm8003voltage dc 6-16vreading distance up to 80 mmreading speed less than 0. 2sreading frequency 125khzsupport card em id card or compatible cardambient temperature -25 ° c — + 70 ° crelative humidity 5% -95% (no condensation)light sound output green backlight led and built-in buzzerdustproof and waterproof ip65product size 8 x 4.

 

Access Control Reader Waterproof ZOTER Metal Keypad IP65 RFID 125Khz Wiegand26

Access Control Reader, Waterproof, ZOTER Metal Keypad IP65 RFID 125Khz Wiegand26

Access Control Reader, Waterproof, ZOTER Metal Keypad IP65 RFID 125Khz Wiegand26 - Ambient temperature -20°c ~ 70°c. Wiegand 26 bit em id proximity card metal keypad reader. Ip65 waterproof. Rfid cards supported 125 khz standard id cards (id only, but not ic not mifare). Note this rfid reader can’t work alone, need work with the access controller panel.

 

Access Control Reader ZOTER Waterproof Wiegand 26 34 Bit RFID 125Khz ID Card Reader for Office Home Security System

Access Control Reader, ZOTER Waterproof Wiegand 26 34 Bit RFID 125Khz ID Card Reader for Office Home Security System

Access Control Reader, ZOTER Waterproof Wiegand 26 34 Bit RFID 125Khz ID Card Reader for Office Home Security System - 5″(w) x 0. Product reference aca-wr26id-r2d specifications 125khz proximity id card reader it’s a standard wiegand 26/34 bit reader read range up to 5cm external buzzer control indoor / outdoor operation solid epoxy potted waterproof support rfid id cards (em4100 standard id cards) note this rfid reader can’t work alone, need work with the access controller panel technical information product type waterproof access control reader output mode standard wiegand 26/34 bit format rfid cards supported em4100 standard id cards input port 2ea (external led control, external buzzer control) led indicator, blue standby state, green triggered state beeper yes read range up to 5 cm frequency 125 khz operating temperature -20 ~ 70°c operating humidity 5% to 95% relative humidity non-condensing power supply dc 12v, 80ma material abs + pc plastic dimension, approx. 74 (l) x 114 (w) x 17 (h) mm, approx. 9″ (l) x 4. 7″ (h) inch package includes 1 x waterproof wiegand 26/34 bit 125khz rfid id card reader for access control system. 2.