23 Top Flat Shanks

 

Michigan Drill 535R Series High-Speed Steel Aligning Reamer Left Hand Spiral Flute Round with Flats Shank Black Oxide Finish 1 Size

Michigan Drill 535R Series High-Speed Steel Aligning Reamer, Left Hand Spiral Flute, Round with Flats Shank, Black Oxide Finish, 1″ Size

Michigan Drill 535R Series High-Speed Steel Aligning Reamer, Left Hand Spiral Flute, Round with Flats Shank, Black Oxide Finish, 1″ Size - These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Reverse (left hand) spiral flute tools push chips forward into the cut as they work, so they won’t pull thin material towards the tool as it cuts and are useful for interrupted cuts such as keyways.

 

Norseman 87020 Type 175-AG 732 x 3-14 135-Degree Split Point 3-Flats Shank Magnum Super Premium Mechanic Length Drill Bit

Norseman 87020 Type 175-AG 7/32″ x 3-1/4″ 135-Degree Split Point 3-Flats Shank Magnum Super Premium Mechanic Length Drill Bit

Norseman 87020 Type 175-AG 7/32″ x 3-1/4″ 135-Degree Split Point 3-Flats Shank Magnum Super Premium Mechanic Length Drill Bit - These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Reverse (left hand) spiral flute tools push chips forward into the cut as they work, so they won’t pull thin material towards the tool as it cuts and are useful for interrupted cuts such as keyways.

 

TOOGOOR 15mm Metal 3-Flat Shank Twist Drill Bit Hole Saw

TOOGOO(R) 15mm Metal 3-Flat Shank Twist Drill Bit Hole Saw

TOOGOO(R) 15mm Metal 3-Flat Shank Twist Drill Bit Hole Saw - Used widely to drill the metallic plate, wooden plate or other metal material. Toogoo(r) 15mm metal 3-flat shank twist drill bit hole sawthree flat shank for better chuck grip. Toogoo is a registered trademark. Pilot drill for precise positioning when using. Only authorized seller of toogoo can sell under toogoo listings. The measurement allowed error is +/- 1-3cm. Package content 1 x hole sawnotelight shooting and different displays may cause the color of the item in the picture a little different from the real thing. Serrated teeth ensures smooth cutting and less vibration. Our products will enhance your experience to unparalleled inspiration.

 

Drillco 4285 Series High-Speed Steel Construction Reamer High Spiral Flute Round with Flats Shank Black Oxide Finish 716 Size 5-38 Length

Drillco 4285 Series High-Speed Steel Construction Reamer, High Spiral Flute, Round with Flats Shank, Black Oxide Finish, 7/16″ Size, 5-3/8″ Length

Drillco 4285 Series High-Speed Steel Construction Reamer, High Spiral Flute, Round with Flats Shank, Black Oxide Finish, 7/16″ Size, 5-3/8″ Length - They are tapered at the point to facilitate entering of holes which are out of alignment. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Neiko 10218A ¼” M2 Countersink Bit Set with Carrying Case 5 Piece  Tri-Flat Shank

Neiko 10218A ¼” M2 Countersink Bit Set with Carrying Case, 5 Piece | Tri-Flat Shank

Neiko 10218A ¼” M2 Countersink Bit Set with Carrying Case, 5 Piece | Tri-Flat Shank - Sturdy aluminum case with handle included for carrying and storage. Set contains 1/4″, 3/8″, 1/2″, 5/8″, and 3/4″ countersink drill bits that are very commonly used. Five-flute design reduces vibration for smoother drilling and tri-flat shank allows easy gripping. Set of five 1/4″ countersink drill bits with precision-ground 82-degree tips for drilling into wood, soft metals, rubber, plastic, and more. Made of high quality m2 material construction for extended bit life and 1/4″ shank fits common handheld power drill.

 

Bosch TC1025 25-Piece 532 In x 3-12 In Flat Shank Hex Masonry Drill Bits

Bosch TC1025 25-Piece 5/32 In. x 3-1/2 In. Flat Shank Hex Masonry Drill Bits

Bosch TC1025 25-Piece 5/32 In. x 3-1/2 In. Flat Shank Hex Masonry Drill Bits - Hex drive on bit fits into driver sleeve. High-quality carbide tip for long life. For use with masonry fastening systems/hex sleeve drive tools. Flat shank prevents bit slippage.

 

Industrial Countersink Drill Bit  5pc Set Tri-Flat Shank Quick Change 14-34

Industrial Countersink Drill Bit | 5pc Set Tri-Flat Shank Quick Change 1/4″-3/4″

Industrial Countersink Drill Bit | 5pc Set Tri-Flat Shank Quick Change 1/4″-3/4″ - High quality m2 steel construction gold and black finish 5 flutes and 82 degree point angle 1/4″ tri-flat shank for easy grip 1/4″ shank fits most common power drills quickly and easily cuts soft metal, wood, rubber, plastic and other machinable materials sizes include 1/4″, 3/8″, 1/2″, 5/8″, 3/4″ includes aluminum storage case.

 

Drillco 1000N Series High-Speed Steel Nitro Reduced Shank Drill Bit BlackGold Oxide Finish Round with Flats Shank Spiral Flute 118 Degree Split Point 1116 Size

Drillco 1000N Series High-Speed Steel Nitro Reduced Shank Drill Bit, Black/Gold Oxide Finish, Round with Flats Shank, Spiral Flute, 118 Degree Split Point, 11/16″ Size

Drillco 1000N Series High-Speed Steel Nitro Reduced Shank Drill Bit, Black/Gold Oxide Finish, Round with Flats Shank, Spiral Flute, 118 Degree Split Point, 11/16″ Size - Heavy duty nitride surface treatment increases hardness for drilling stainless steel and other hard metals. Self-centering 118-degree split point penetrates material without a pilot hole. High-speed steel (hss) provides hardness for wear resistance. Reduced shank drill bit has a shank that is smaller in diameter than its shaft, permitting drilling with a 1/2″ drill chuck. Black and gold oxide finish resists corrosion and increases the hardness of the drill bit for additional wear resistance.

 

New Aluminum Storage CaseIndustrial Countersink Drill Bit  5pc Set Tri-Flat Shank Quick Change 14-34

New Aluminum Storage Case,Industrial Countersink Drill Bit | 5pc Set Tri-Flat Shank Quick Change 1/4″-3/4″

New Aluminum Storage Case,Industrial Countersink Drill Bit | 5pc Set Tri-Flat Shank Quick Change 1/4″-3/4″ - High quality m2 steel construction gold and black finish 5 flutes and 82 degree point angle 1/4″ tri-flat shank for easy grip 1/4″ shank fits most common power drills quickly and easily cuts soft metal, wood, rubber, plastic and other machinable materials sizes include 1/4″, 3/8″, 1/2″, 5/8″, 3/4″ includes aluminum storage case.

 

Bosch TC6005 5-Piece 316 In x 5-12 In Flat Shank Hex Masonry Drill Bits

Bosch TC6005 5-Piece 3/16 In. x 5-1/2 In. Flat Shank Hex Masonry Drill Bits

Bosch TC6005 5-Piece 3/16 In. x 5-1/2 In. Flat Shank Hex Masonry Drill Bits - Flat shank prevents bit slippage. For use with masonry fastening systems/hex sleeve drive tools. High-quality carbide tip for long life. Hex drive on bit fits into driver sleeve.

 

Bosch TC2025 25-Piece 532 In x 4-12 In Flat Shank Hex Masonry Drill Bits

Bosch TC2025 25-Piece 5/32 In. x 4-1/2 In. Flat Shank Hex Masonry Drill Bits

Bosch TC2025 25-Piece 5/32 In. x 4-1/2 In. Flat Shank Hex Masonry Drill Bits - Hex drive on bit fits into driver sleeve. For use with masonry fastening systems/hex sleeve drive tools. High-quality carbide tip for long life. Flat shank prevents bit slippage.

 

Michigan Drill 535R Series High-Speed Steel Aligning Reamer Left Hand Spiral Flute Round with Flats Shank Black Oxide Finish 12 Size

Michigan Drill 535R Series High-Speed Steel Aligning Reamer, Left Hand Spiral Flute, Round with Flats Shank, Black Oxide Finish, 1/2″ Size

Michigan Drill 535R Series High-Speed Steel Aligning Reamer, Left Hand Spiral Flute, Round with Flats Shank, Black Oxide Finish, 1/2″ Size - Reverse (left hand) spiral flute tools push chips forward into the cut as they work, so they won’t pull thin material towards the tool as it cuts and are useful for interrupted cuts such as keyways. Black oxide treatment adds lubricity and creates small pockets on the surface of the tool that act to hold coolant near the cutting edge. Right-hand cut tools have a cutting action that engages when they are run in a clockwise direction. These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.

 

Uxcell Metal 3 Flat Shank Working Hole Saw Cutter 26mm

Uxcell Metal 3 Flat Shank Working Hole Saw Cutter, 26mm

Uxcell Metal 3 Flat Shank Working Hole Saw Cutter, 26mm - Used widely to drill the metallic plate, wooden plate or other metal material. Pilot drill for precise positioning when using. Serrated teeth ensures smooth cutting and less vibration. Three flat shank for better chuck grip.

 

Conical Single Flat Shank Chisel Point 1564 Diameter 3 Pcs Soldering Tip 60W

Conical Single Flat Shank Chisel Point 15/64″ Diameter 3 Pcs Soldering Tip 60W

Conical Single Flat Shank Chisel Point 15/64″ Diameter 3 Pcs Soldering Tip 60W - Is easy to install. Color black weight 47g package content 3 x soldering iron tip 3 pcs soldering iron tips are included here, conical tip, single flat tip and chisel tip suitable for standard soldering with 60w irons.

 

Bosch TC3005 5-Piece 532 In x 5-12 In Flat Shank Hex Masonry Drill Bits

Bosch TC3005 5-Piece 5/32 In. x 5-1/2 In. Flat Shank Hex Masonry Drill Bits

Bosch TC3005 5-Piece 5/32 In. x 5-1/2 In. Flat Shank Hex Masonry Drill Bits - High-quality carbide tip for long life. Flat shank prevents bit slippage. Hex drive on bit fits into driver sleeve. For use with masonry fastening systems/hex sleeve drive tools.

 

Bosch TC2005 5-Piece 532 In x 4-12 In Flat Shank Hex Masonry Drill Bits

Bosch TC2005 5-Piece 5/32 In. x 4-1/2 In. Flat Shank Hex Masonry Drill Bits

Bosch TC2005 5-Piece 5/32 In. x 4-1/2 In. Flat Shank Hex Masonry Drill Bits - For use with masonry fastening systems/hex sleeve drive tools. Hex drive on bit fits into driver sleeve. Flat shank prevents bit slippage. High-quality carbide tip for long life.

 

Norseman 87110 Type 175-AG 2364 x 4-316 135-Degree Split Point 3-Flats Shank Magnum Super Premium Mechanic Length Drill Bit

Norseman 87110 Type 175-AG 23/64″ x 4-3/16″ 135-Degree Split Point 3-Flats Shank Magnum Super Premium Mechanic Length Drill Bit

Norseman 87110 Type 175-AG 23/64″ x 4-3/16″ 135-Degree Split Point 3-Flats Shank Magnum Super Premium Mechanic Length Drill Bit - High quality carbide with a reinforced head that prevents bit cracking and provides a longer life. Three flat shank to prevent slippage. Bosch branded, innovative geometry allows bits to drill faster. The product is manufactured in china. Sold on amazon. Precision tip, solves bit wander and bit walking. Easy to use. 4-piece set with most common sizes.

 

Drillco 1000F Series High-Speed Steel Reduced Shank Drill Bit Uncoated BrightBlack Oxide Finish Round with Flats Shank Spiral Flute 118 Degree Conventional Point 34 Size

Drillco 1000F Series High-Speed Steel Reduced Shank Drill Bit, Uncoated (Bright)/Black Oxide Finish, Round with Flats Shank, Spiral Flute, 118 Degree Conventional Point, 3/4″ Size

Drillco 1000F Series High-Speed Steel Reduced Shank Drill Bit, Uncoated (Bright)/Black Oxide Finish, Round with Flats Shank, Spiral Flute, 118 Degree Conventional Point, 3/4″ Size - High-speed steel (hss) provides hardness for wear resistance. Round shank with three flats to reduce slippage in drill chuck. Reduced shank drill bit has a shank that is smaller in diameter than its shaft, permitting drilling with a 1/2″ drill chuck. Black oxide finish on the flutes reduces wear while promoting chip and coolant flow. Designed for drilling low- and medium-tensile strength metals.

 

Bosch TC900 9-Piece Flat Shank Drill Bit Set

Bosch TC900 9-Piece Flat Shank Drill Bit Set

Bosch TC900 9-Piece Flat Shank Drill Bit Set - For use with masonry fastening systems/hex sleeve drive tools. Kit includes power bits, hex sockets, drill bits, drive sleeve, hex key and bit holder. Hex drive on bit fits into driver sleeve. Flat shank prevents bit slippage. High-quality carbide tip for long life.

 

Drillco 350N Series Nitro 29 Piece High-Speed Steel Mechanics Length Drill Bit Set Black and Gold Oxide Finish Round with Flats Shank Spiral Flute 135 Degrees Split Point 116 - 12 in 164 increments

Drillco 350N Series Nitro 29 Piece High-Speed Steel Mechanics Length Drill Bit Set, Black and Gold Oxide Finish, Round with Flats Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments

Drillco 350N Series Nitro 29 Piece High-Speed Steel Mechanics Length Drill Bit Set, Black and Gold Oxide Finish, Round with Flats Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 1/2″ in 1/64″ increments - High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 29 screw machine length drill bits ranging in size from 1/16″ to 1/2″ in 1/64″ increments. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools. These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging.

 

Hitachi 728164 716-Inch By 5-12-Inch 3-Flat Shank Titanium Drill Bit

Hitachi 728164 7/16-Inch By 5-1/2-Inch 3-Flat Shank Titanium Drill Bit

Hitachi 728164 7/16-Inch By 5-1/2-Inch 3-Flat Shank Titanium Drill Bit - Titanium provides durability and speed for drilling applications and ideal for contractors, serious do-it-yourselfers, machine shops, and mechanics. Titanium provides durability and speed for drilling applications into wood and metal. Has a precision 135-degree split-point tips to prevent drill bit walking. The 7/16-inch thick hitachi 728164 has a length of 5-1/2-inch and includes a 3-flat shank helping your tool keep a tight grip while in use. Ideal for contractors serious do-it-yourselfers machine shops and mechanics. Comes with a 30-day limited warranty. Precision 135-degree split-point tip prevents drill bit walking. 7/16-inch by 5-1/2-inch 3-flat shank titanium drill bit. Hitachi duracore treated products are manufactured utilizing a proprietary technologically superior to cryogenic treatment.

 

Bosch TC200 532 In x 4-12 In Flat Shank Hex Masonry Drill Bit

Bosch TC200 5/32 In. x 4-1/2 In. Flat Shank Hex Masonry Drill Bit

Bosch TC200 5/32 In. x 4-1/2 In. Flat Shank Hex Masonry Drill Bit - For use with masonry fastening systems/hex sleeve drive tools. High-quality carbide tip for long life. Hex drive on bit fits into driver sleeve. Flat shank prevents bit slippage.

 

Drillco 350N Series Nitro 21 Piece High-Speed Steel Mechanics Length Drill Bit Set Black and Gold Oxide Finish Round with Flats Shank Spiral Flute 135 Degrees Split Point 116 - 38 in 164 increments

Drillco 350N Series Nitro 21 Piece High-Speed Steel Mechanics Length Drill Bit Set, Black and Gold Oxide Finish, Round with Flats Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments

Drillco 350N Series Nitro 21 Piece High-Speed Steel Mechanics Length Drill Bit Set, Black and Gold Oxide Finish, Round with Flats Shank, Spiral Flute, 135 Degrees Split Point, 1/16″ – 3/8″ in 1/64″ increments - These round shank tools have flats ground onto three sides to reduce slippage of the bit when used in drill chucks. When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging. High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. 21 screw machine length drill bits ranging in size from 1/16″ to 3/8″ in 1/64″ increments. Gold oxide is a thinner oxide surface treatment than black oxide typically used to identify cobalt steel tools performance is similar to uncoated tools.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.