23 Coolest Tricones

 

GOWE three cone rotary tci tricone diamond core bit 8 12 hammer bitoil drilling tricone bit

GOWE three cone rotary tci tricone diamond core bit /8 1/2″ hammer bit/oil drilling tricone bit

GOWE three cone rotary tci tricone diamond core bit /8 1/2″ hammer bit/oil drilling tricone bit - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance (hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 1pcs. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other.

 

GOWE tricone drill rock bits 8 12  water well bit 8 12TCI tricone bit

GOWE tricone drill rock bits 8 1/2 / water well bit 8 1/2TCI tricone bit

GOWE tricone drill rock bits 8 1/2 / water well bit 8 1/2TCI tricone bit - 4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. Product description model name tci bit 8 1/2 inch iadc 517 material 15grni4mo cutting element hard alloy cutting tooth size 8 1/2 inch iadc code 517/537 bearing type rubber sealed bearing type thread connection 4 1/2reg wob(kn/mm) 050- 105 rpm (r/min) 110-40 applicable formations low compressive strength ,soft,and have a hard abrasive sandwich,such as hard shaleanhydrite,soft limestone, sandstone,hamsandwich dolomite, etc nozzles 3 pcs. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance (hard shale,sands,etc) 2bit bearing is non-sealed roller bearing3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od.

 

GOWE 15 12 Steel tooth tricone bits

GOWE 15 1/2″ Steel tooth tricone bits

GOWE 15 1/2″ Steel tooth tricone bits - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. Product description model stee tooth bit iadc code 124 126 134 available size 15 1/2inch thread connection 7 5/8reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation soft formation nozzles 3pcs. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other.

 

4 18 BE718 HQ Tricone Oil Gas Drill Bit BE718WO041-377-5-03warranty

4 1/8″ BE718 HQ Tricone Oil & Gas Drill Bit BE718,WO,041-377-5-03,warranty

4 1/8″ BE718 HQ Tricone Oil & Gas Drill Bit BE718,WO,041-377-5-03,warranty - 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. Product description model tci tricone drill bit iadc code 517 available size 9 1/2inch thread connection 6 5/8reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 3pcs.

 

GOWE Tricone bit roller cutters for core barrel

GOWE Tricone bit roller cutters for core barrel

GOWE Tricone bit roller cutters for core barrel - Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min)70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 1pcs. Medium hard formation with high compress strength,such as hard shale, limestone, sandstone, dolomite etc 637/635 05~11 180~40 hard formations with high compressive strength,such as sandstone,limestone, dolomite ,hard gypsum,marble, etcnote the upper limits of wob and rpm in above table should not be used simultaneously. Gypsum,salt,soft limestone,etc537/547/535 045~10 220~50 soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc617/615 045~11 200~50. Model numberl 8 1/2″2159mm type tungsten carbide bit material 15crni4mo size 8 1/2″tricone palm iadc 417 application water well, oilfield, mining drillingseal type metal sealing applicable strata very soft with low compressive strength,such as soft marl,clay,sandstorm,salt,etc. Iadc code wob (kn/mm) rpm (r/min) applicable formations 437/447/435 035~09 240~70 very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc517/527/515 035~10 220~60 soft formations with low compressive strength and high drillability,such as mudstone,.

 

GOWE 4-12 114mm Open Bearing Milled Tooth Tricone Bit

GOWE 4-1/2″ 114mm Open Bearing Milled Tooth Tricone Bit

GOWE 4-1/2″ 114mm Open Bearing Milled Tooth Tricone Bit - 4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. Product description steel tooth bit 4 5/8inch for soft formation model steel tooth bit iadc code 124 available size 4 1/2inch thread connection 2 7/8reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formationsoft formation nozzles 1pcs. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price4tungsten carbide insert tricone bit5certified by iso,api6high efficiency2advantages of tci bits1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od.

 

GOWE 8 12inch tricone bit cutter for pliing

GOWE 8 1/2inch tricone bit cutter for pliing

GOWE 8 1/2inch tricone bit cutter for pliing - Model number 8 1/2″2159mm type tungsten carbide bit material 15crni4mo size 8 1/2″tricone palm iadc 417 application water well, oilfield, mining drilling seal type metal sealing applicable strata very soft with low compressive strength,such as soft marl,clay, sandstorm,salt,etc. Strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc 617/615 045~11 200~50 medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite etc 637/635 05~11 180~40 hard formations with high compressive strength,such as sandstone, limestone, dolomite ,hard gypsum,marble, etc. Iadc code wob(kn/mm) rpm(r/min) applicable formations 437/447/435 035~09 240~70 very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc517/527/515 035~10 220~60 soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone,etc537/547/535 045~10 220~50 soft to medium formations with low compressive. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 1pcs. Note the upper limits of wob and rpm in above table should not be used simultaneously.

 

GOWE Steel tooth bit tricone bit 4 12inch for soft formationmilled tooth bit

GOWE Steel tooth bit tricone bit 4 1/2inch for soft formation/milled tooth bit

GOWE Steel tooth bit tricone bit 4 1/2inch for soft formation/milled tooth bit - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price4tungsten carbide insert tricone bit5certified by iso,api6high efficiency2advantages of tci bits1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od. Product description steel tooth bit 4 1/2inch for soft formation model steel tooth bit iadc code 127 available size 4 1/2inch thread connection 2 7/8reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best qualitybearing typesealed and non-sealed bearingusewater well ,oil well and mining drilling,underground explorationformationsoft formationnozzles1pcs. 4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other.

 

GOWE 5 12inch142mm TCI tricone bits for oil drilling rigs water well drilling bits

GOWE 5 1/2inch142mm TCI tricone bits for oil drilling rigs/ water well drilling bits

GOWE 5 1/2inch142mm TCI tricone bits for oil drilling rigs/ water well drilling bits - Product description model tci tricone drill bit iadc code 517 available size 5 1/2inch thread connection 3 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 1pcs. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance (hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other.

 

GOWE 8 12inch IADC527 tricone drill bit for hard formation

GOWE 8 1/2inch IADC527 ‘tricone drill bit for hard formation

GOWE 8 1/2inch IADC527 ‘tricone drill bit for hard formation - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. Product description modeltci tricone drill bit iadc code 527 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 3pcs.

 

GOWE 8 12TCI tricone drill bit  Tricone drill bit Manufacturer for wateroil well drilling

GOWE 8 1/2TCI tricone drill bit / Tricone drill bit Manufacturer for water/oil well drilling

GOWE 8 1/2TCI tricone drill bit / Tricone drill bit Manufacturer for water/oil well drilling - Product description model name tci bit 8 1/2 inch iadc 537 material 15grni4mocutting element hard alloy cutting tooth size 8 1/2 inch iadc code 517/537 bearing type rubber sealed bearing type thread connection 4 1/2reg wob(kn/mm) 050- 105 rpm (r/min) 110-40 applicable formations low compressive strength ,soft,and have a hard abrasive sandwich,such as hard shaleanhydrite,soft limestone, sandstone,hamsandwich dolomite, etcnozzles 3-4 pcs. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other.

 

GOWE 8 12inch tricone bit cuttertricone palm

GOWE 8 1/2inch tricone bit cutter/tricone palm

GOWE 8 1/2inch tricone bit cutter/tricone palm - Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 1pcs. Model number 8 1/2″2159mm type tungsten carbide bit material 15crni4mo size 8 1/2″tricone palm iadc 417 application water well, oilfield, mining drilling seal type metal sealing applicable strata very soft with low compressive strength,such as soft marl,clay,sandstorm,salt,etc. Iadc code wob(kn/mm) rpm(r/min) applicable formations 437/447/435 035~09 240~70 very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc517/527/515 035~10 220~60 soft formations with low compressive strength and high drillability,such as mudstone,gypsum,salt,soft limestone,etc537/547/535 045~10 220~50 soft to medium formations with low compressive. Strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc 617/615 045~11 200~50 medium hard formation with high compress strength, such as hard shale, limestone, sandstone, dolomite etc 637/635 05~11 180~40 hard formations with high compressive strength,such as sandstone, limestone, dolomite ,hard gypsum,marble, etc. Note the upper limits of wob and rpm in above table should not be used simultaneously.

 

GOWE 8 12inch tricone rock drill bits for water well drilling

GOWE 8 1/2inch tricone rock drill bits for water well drilling

GOWE 8 1/2inch tricone rock drill bits for water well drilling - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance (hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 3pcs. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other.

 

GOWE TCI Tricone Rock Bits Seal Bearing 8 12 IADC 517 Deep Water Well Drilling

GOWE TCI Tricone Rock Bits Seal Bearing 8 1/2″ IADC 517 Deep Water Well Drilling

GOWE TCI Tricone Rock Bits Seal Bearing 8 1/2″ IADC 517 Deep Water Well Drilling - 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance (hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 3pcs.

 

GOWE 8 12inch Insert Tricone Rotary Bitwater well drilling equipment

GOWE 8 1/2inch Insert Tricone Rotary Bit,water well drilling equipment

GOWE 8 1/2inch Insert Tricone Rotary Bit,water well drilling equipment - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 3pcs.

 

GOWE 8 12inch IADC537 tci tricone bit  Metal Sealed Bearing Tricone Drill Bit

GOWE 8 1/2inch IADC537 tci tricone bit / Metal Sealed Bearing Tricone Drill Bit

GOWE 8 1/2inch IADC537 tci tricone bit / Metal Sealed Bearing Tricone Drill Bit - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. Product description model name tci bit 15 1/2 inch iadc 537 material 15grni4mo cutting element hard alloy cutting toothsize 8 1/2 inch iadc code 517/537 bearing type rubber sealed bearing type thread connection 4 1/2reg wob(kn/mm) 050- 105 rpm (r/min) 110-40 applicable formations low compressive strength ,soft,and have a hard abrasive sandwich,such as hard shaleanhydrite,soft limestone, sandstone,hamsandwich dolomite, etc nozzles 3pcs.

 

GOWE 8 12inch three cone rotary tci tricone diamond core bitoil well drilling

GOWE 8 1/2inch three cone rotary tci tricone diamond core bit/oil well drilling

GOWE 8 1/2inch three cone rotary tci tricone diamond core bit/oil well drilling - 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance (hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 3pcs.

 

GOWE foundation drilling conical tooltricone bit cutters 8 12 inch for construction pilling

GOWE foundation drilling conical tool/tricone bit cutters 8 1/2 inch for construction pilling

GOWE foundation drilling conical tool/tricone bit cutters 8 1/2 inch for construction pilling - Model number 8 1/2″2159mm type tungsten carbide bitmaterial 15crni4mo size 8 1/2″tricone palm iadc417 application water well, oilfield, mining drilling seal type metal sealing applicable strata very soft with low compressive strength,such as soft marl,clay,sandstorm,salt,etc. Gypsum,salt,soft limestone,etc537/547/535 045~10 220~50 soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc617/615 045~11 200~50. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mowob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 1pcs. Medium hard formation with high compress strength,such as hard shale, limestone, sandstone, dolomite etc 637/635 05~11 180~40 hard formations with high compressive strength,such as sandstone,limestone, dolomite ,hard gypsum,marble, etcnote the upper limits of wob and rpm in above table should not be used simultaneously. Iadc code wob (kn/mm) rpm (r/min) applicable formations 437/447/435 035~09 240~70 very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc517/527/515 035~10 220~60 soft formations with low compressive strength and high drillability,such as mudstone,.

 

GOWE 8 12inch tricone cuttertricone palm piling bit

GOWE 8 1/2inch tricone cutter/tricone palm /piling bit

GOWE 8 1/2inch tricone cutter/tricone palm /piling bit - Iadc code wob (kn/mm) rpm (r/min) applicable formations 437/447/435 035~09 240~70 very soft formations with low compressive strength and high drillability,such as clay,mudstone,chalk,gypsum,salt,soft limestone, etc517/527/515 035~10 220~60 soft formations with low compressive strength and high drillability,such as mudstone,. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 1pcs. Model number 8 1/2″2159mm type tungsten carbide bit material 15crni4mo size 8 1/2″tricone palm iadc 417 application water well, oilfield, mining drilling seal type metal sealing applicable strata very soft with low compressive strength,such as soft marl,clay,sandstorm,salt,etc. Medium hard formation with high compress strength,such as hard shale, limestone, sandstone, dolomite etc 637/635 05~11 180~40 hard formations with high compressive strength,such as sandstone,limestone, dolomite ,hard gypsum,marble, etcnote the upper limits of wob and rpm in above table should not be used simultaneously. Gypsum,salt,soft limestone,etc537/547/535 045~10 220~50 soft to medium formations with low compressive strength, such as medium, soft shale, medium soft limestone, medium soft sandstone, medium formation with harder and abrasive interbeds, etc617/615 045~11 200~50.

 

GOWE 8 12 IADC127 sealed journal bearing tricone bitMill tooth tricone drill bit

GOWE 8 1/2 IADC127 sealed journal bearing tricone bit/Mill tooth tricone drill bit

GOWE 8 1/2 IADC127 sealed journal bearing tricone bit/Mill tooth tricone drill bit - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance (hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. Product description steel tooth bit 6inch for soft formation model steel tooth bit iadc code 127available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground explorationformation soft formation nozzles 3pcs. 3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other.

 

GOWE 17 12inch 4445mm IADC 517 TCI Tricone Rock Bits

GOWE 17 1/2inch 444.5mm IADC 517 TCI Tricone Rock Bits

GOWE 17 1/2inch 444.5mm IADC 517 TCI Tricone Rock Bits - Product description model tci tricone drill bit iadc code 517 available size 17 1/2inch thread connection 6 5/8reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 1pcs. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc). 2bit bearing is non-sealed roller bearing3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear. 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other.

 

GOWE 4 58inch118mm steel tooth tricone bit mill tooth tricone rock drilling bitsdrilling bit

GOWE 4 5/8inch118mm steel tooth tricone bit ,mill tooth tricone rock drilling bits,drilling bit

GOWE 4 5/8inch118mm steel tooth tricone bit ,mill tooth tricone rock drilling bits,drilling bit - 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price 4tungsten carbide insert tricone bit 5certified by iso,api 6high efficiency 2advantages of tci bits 1suitable for medium to medium hard formation of high crushing resistance (hard shale,sands,etc) 2bit bearing is non-sealed roller bearing. Product description steel tooth bit 4 5/8inch for soft formation model steel tooth bit iadc code 124 available size 4 5/8inch thread connection 2 7/8reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation soft formation nozzles 1pcs. Product description model tci tricone drill bit iadc code 517 available size 8 1/2inch thread connection 4 1/2reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation hard formation nozzles 3pcs.

 

GOWE 4-12 Tri cone bits 114mm Milled Tooth tricone bits soft rock drill bits

GOWE 4-1/2″ Tri cone bits, 114mm Milled Tooth tricone bits, soft rock drill bits

GOWE 4-1/2″ Tri cone bits, 114mm Milled Tooth tricone bits, soft rock drill bits - 4cone gage surface is reinforce with carbide compacts5 partial top spoon shaped inner row of teeth, the wedge outer row of teeth is not equidistant teeth, in the back cone tooth and the outer row of teeth between adds a row of trimming gear 6 high compressive strength, hard and abrasive high formation, such as limestone, dolomite,sandstone, chert and other. Product description steel tooth bit 4 5/8inch for soft formation model steel tooth bit iadc code 124 available size 4 1/2inch thread connection 2 7/8reg material 15crni4mo wob(kn/mm) 070~120 rpm(r/min) 70~40 advantage most favorable price and best quality bearing type sealed and non-sealed bearing use water well ,oil well and mining drilling,underground exploration formation soft formation nozzles 1pcs. 1features of tci bits 1size2 7/8″ (700mm)~26″ (6604mm) 2cover all all iadc code 3reliable quality and best price4tungsten carbide insert tricone bit5certified by iso,api6high efficiency2advantages of tci bits1suitable for medium to medium hard formation of high crushing resistance(hard shale,sands,etc) 2bit bearing is non-sealed roller bearing3hardfacing is applied on the shirttail,and carbide inserts for gage protection are pressed into the head od.