22 Most Wanted 110 Coppers

 

110 Copper Sheet010 Thickness x 12 Width x 12 Length 1 Pc

110 Copper Sheet.010″ Thickness x 12″ Width x 12″ Length, 1 Pc.

110 Copper Sheet.010″ Thickness x 12″ Width x 12″ Length, 1 Pc. - Length 50 ft, coil. Lead and nickel free. Free shipping in us / made is usa. Wire size 10 ga. High electrical conductivity and formability with 9999% copper content used in electrical applications as bus bars, wire connectors, gaskets, and rivets also known as etp copper.

 

110 Copper Round Shim Unpolished Mill Finish H02H04 Temper ASTM B152 0005 Thickness 58 ID 1 OD Pack of 10

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.005″ Thickness, 5/8″ ID, 1″ OD (Pack of 10)

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.005″ Thickness, 5/8″ ID, 1″ OD (Pack of 10) - Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. They also can be used to fill gaps between machine parts that are prone to wear. It is nonmagnetic. The 110 copper alloy has high electrical and thermal conductivity, and offers good corrosion resistance. Shapes include round, notched, and slotted. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The 110 copper round shim has an unpolished (mill) surface, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

 

110 Copper Round Rod Unpolished Mill Finish H04 Temper ASTM B187 1 Diameter 36 Length

110 Copper Round Rod, Unpolished (Mill) Finish, H04 Temper, ASTM B187, 1″ Diameter, 36″ Length

110 Copper Round Rod, Unpolished (Mill) Finish, H04 Temper, ASTM B187, 1″ Diameter, 36″ Length - 3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness. Formability indicates how easily the material can be permanently shaped. Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. 9% pure copper and has high conductivity and formability. The material has an h04 temper, meaning it has been cold worked to a hard temper. The 110 copper round rod with h04 temper is unpolished, meets american society for testing and materials international astm b187 specifications, and has a standard tolerance. It provides greater strength and better machinability than copper or bronze. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Copper, a term that applies to alloys containing at least 99. Tin gives bronze more corrosion resistance than brass and greater strength than copper. The 110 copper alloy is 99. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon.

 

110 Copper Sheet Unpolished Mill Finish Soft Temper ASTM B152 0005 Thickness 12 Width 36 Length

110 Copper Sheet, Unpolished (Mill) Finish, Soft Temper, ASTM B152, 0.005″ Thickness, 12″ Width, 36″ Length

110 Copper Sheet, Unpolished (Mill) Finish, Soft Temper, ASTM B152, 0.005″ Thickness, 12″ Width, 36″ Length - Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness. The 110 copper alloy is 99. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. 9% pure copper and has high conductivity and formability. It provides greater strength and better machinability than copper or bronze. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Formability indicates how easily the material can be permanently shaped. Copper, a term that applies to alloys containing at least 99. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The material has a soft temper, meaning it has been soft annealed. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. 3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. The 110 copper sheet with soft temper is unpolished, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance.

 

110 Copper Round Shim Unpolished Mill Finish H02H04 Temper ASTM B152 0005 Thickness 34 ID 1-18 OD Pack of 10

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.005″ Thickness, 3/4″ ID, 1-1/8″ OD (Pack of 10)

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.005″ Thickness, 3/4″ ID, 1-1/8″ OD (Pack of 10) - Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. They also can be used to fill gaps between machine parts that are prone to wear. It is nonmagnetic. The 110 copper alloy has high electrical and thermal conductivity, and offers good corrosion resistance. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. Shapes include round, notched, and slotted. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. The 110 copper round shim has an unpolished (mill) surface, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance.

 

110 Copper Round Shim Unpolished Mill Finish H02H04 Temper ASTM B152 0021 Thickness 1 ID 1-12 OD Pack of 5

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.021″ Thickness, 1″ ID, 1-1/2″ OD (Pack of 5)

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.021″ Thickness, 1″ ID, 1-1/2″ OD (Pack of 5) - Shapes include round, notched, and slotted. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The 110 copper round shim has an unpolished (mill) surface, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. The 110 copper alloy has high electrical and thermal conductivity, and offers good corrosion resistance. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. It is nonmagnetic. They also can be used to fill gaps between machine parts that are prone to wear. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium.

 

110 Copper Round Rod Unpolished Mill Finish H04 Temper ASTM B187 025 Diameter 12 Length

110 Copper Round Rod, Unpolished (Mill) Finish, H04 Temper, ASTM B187, 0.25″ Diameter, 12″ Length

110 Copper Round Rod, Unpolished (Mill) Finish, H04 Temper, ASTM B187, 0.25″ Diameter, 12″ Length - Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. The material has an h04 temper, meaning it has been cold worked to a hard temper. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. 3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. It provides greater strength and better machinability than copper or bronze. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. 9% pure copper and has high conductivity and formability. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The 110 copper alloy is 99. Copper, a term that applies to alloys containing at least 99. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. The 110 copper round rod with h04 temper is unpolished, meets american society for testing and materials international astm b187 specifications, and has a standard tolerance. Formability indicates how easily the material can be permanently shaped.

 

RMP 110 Copper Sheet 12 Inch x 24 Inch x 0021 Inch Thick

RMP 110 Copper Sheet, 12 Inch x 24 Inch x 0.021 Inch Thick

RMP 110 Copper Sheet, 12 Inch x 24 Inch x 0.021 Inch Thick - 0021″ thickness. 16 oz copper sheet. Made in usa. 12″ x 24″.

 

110 Copper Round Shim Unpolished Mill Finish H02H04 Temper ASTM B152 0021 Thickness 38 ID 58 OD Pack of 10

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.021″ Thickness, 3/8″ ID, 5/8″ OD (Pack of 10)

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.021″ Thickness, 3/8″ ID, 5/8″ OD (Pack of 10) - Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. It is nonmagnetic. The 110 copper round shim has an unpolished (mill) surface, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. They also can be used to fill gaps between machine parts that are prone to wear. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Shapes include round, notched, and slotted. The 110 copper alloy has high electrical and thermal conductivity, and offers good corrosion resistance.

 

110 Copper Sheet Unpolished Mill Finish H02 Temper ASTM B370 00216 Thickness 24 Width 24 Length 24 Gauge

110 Copper Sheet, Unpolished (Mill) Finish, H02 Temper, ASTM B370, 0.0216″ Thickness, 24″ Width, 24″ Length, 24 Gauge

110 Copper Sheet, Unpolished (Mill) Finish, H02 Temper, ASTM B370, 0.0216″ Thickness, 24″ Width, 24″ Length, 24 Gauge - Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. It provides greater strength and better machinability than copper or bronze. 9% pure copper and has high conductivity and formability. The 110 copper alloy is 99. 3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Copper, a term that applies to alloys containing at least 99. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. The material has an h02 temper, meaning it has been cold worked to a 1/2 hard temper. Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. The 110 copper sheet with h02 temper is unpolished, meets american society for testing and materials international astm b370 specifications, and has a standard tolerance. Formability indicates how easily the material can be permanently shaped.

 

110 Copper Sheet Unpolished Mill Finish Soft Temper ASTM B152 0005 Thickness 12 Width 24 Length

110 Copper Sheet, Unpolished (Mill) Finish, Soft Temper, ASTM B152, 0.005″ Thickness, 12″ Width, 24″ Length

110 Copper Sheet, Unpolished (Mill) Finish, Soft Temper, ASTM B152, 0.005″ Thickness, 12″ Width, 24″ Length - 9% pure copper and has high conductivity and formability. Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. The 110 copper alloy is 99. Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The 110 copper sheet with soft temper is unpolished, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness. The material has a soft temper, meaning it has been soft annealed. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. Tin gives bronze more corrosion resistance than brass and greater strength than copper. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Formability indicates how easily the material can be permanently shaped. It provides greater strength and better machinability than copper or bronze. 3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Copper, a term that applies to alloys containing at least 99.

 

YUCHENGTECH Static Eliminator ESD 2 Ionizing Bars L30cm Anti Static Rods  56KV Voltage Generator for Printing 110V Copper Alloy

YUCHENGTECH Static Eliminator ESD 2 Ionizing Bars L30cm Anti Static Rods + 5.6KV Voltage Generator for Printing 110V Copper Alloy

YUCHENGTECH Static Eliminator ESD 2 Ionizing Bars L30cm Anti Static Rods + 5.6KV Voltage Generator for Printing 110V Copper Alloy - [Scope of application] packaging, electronics assembly, biological products, pharmaceutical, injection molding, printing and more. [Air inlet] the diameter of air inlet is 8mm, needs to be used with your air compressor. [stainless steel ion needle] more corrosion resistant, ion discharge, safe and harmless. [Air outlet] large air outlet, fast static elimination and dust removal. [Copper alloy pipe body] impact resistance, more suitable for industrial use length can be customized.

 

110 Copper Round Shim Unpolished Mill Finish H02H04 Temper ASTM B152 0005 Thickness 12 ID 34 OD Pack of 10

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.005″ Thickness, 1/2″ ID, 3/4″ OD (Pack of 10)

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.005″ Thickness, 1/2″ ID, 3/4″ OD (Pack of 10) - Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The 110 copper round shim has an unpolished (mill) surface, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. It is nonmagnetic. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. They also can be used to fill gaps between machine parts that are prone to wear. Shapes include round, notched, and slotted. The 110 copper alloy has high electrical and thermal conductivity, and offers good corrosion resistance. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation.

 

110 Copper Round Shim Unpolished Mill Finish H02H04 Temper ASTM B152 0016 Thickness 12 ID 34 OD Pack of 10

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.016″ Thickness, 1/2″ ID, 3/4″ OD (Pack of 10)

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.016″ Thickness, 1/2″ ID, 3/4″ OD (Pack of 10) - Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. The 110 copper round shim has an unpolished (mill) surface, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. It is nonmagnetic. The 110 copper alloy has high electrical and thermal conductivity, and offers good corrosion resistance. Shapes include round, notched, and slotted. They also can be used to fill gaps between machine parts that are prone to wear.

 

RMP 110 Copper Sheet 5 Inch x 7 Inch x 0021 Inch Thick

RMP 110 Copper Sheet, 5 Inch x 7 Inch x 0.021 Inch Thick

RMP 110 Copper Sheet, 5 Inch x 7 Inch x 0.021 Inch Thick - Standard tolerance. 110 copper. Package of 3 pieces of 5 inch x 7 inch 16 oz copper. 1/8 hard temper.

 

RMP 110 Copper Sheet 12 Inch x 12 Inch x 0064 Inch Thick

RMP 110 Copper Sheet, 12 Inch x 12 Inch x 0.064 Inch Thick

RMP 110 Copper Sheet, 12 Inch x 12 Inch x 0.064 Inch Thick - 110 copper sheet, 0. 064″ thickness (48 oz) 1/8 hd, 12″ width, 12″ length.

 

110 Copper Round Shim Unpolished Mill Finish H02H04 Temper ASTM B152 0032 Thickness 58 ID 1 OD Pack of 10

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.032″ Thickness, 5/8″ ID, 1″ OD (Pack of 10)

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.032″ Thickness, 5/8″ ID, 1″ OD (Pack of 10) - Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. The 110 copper alloy has high electrical and thermal conductivity, and offers good corrosion resistance. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. They also can be used to fill gaps between machine parts that are prone to wear. The 110 copper round shim has an unpolished (mill) surface, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. It is nonmagnetic. Shapes include round, notched, and slotted.

 

110 Copper Sheet012 Thickness x 12 Width x 12 Length 1 Pc

110 Copper Sheet.012″ Thickness x 12″ Width x 12″ Length, 1 Pc.

110 Copper Sheet.012″ Thickness x 12″ Width x 12″ Length, 1 Pc. - Thickness tol +/-0015″ annealed high electrical conductivity and formability with 9999% copper content used in electrical applications as bus bars, wire connectors, gaskets, and rivets also known as etp copper. Standard tolerance. Meets astm b370 specifications. Unpolished (mill) surface has no finish. H02 temper has been cold worked to a 1/2 hard temper.

 

110 Copper Sheet Unpolished Mill Finish Soft Temper ASTM B152 0005 Thickness 12 Width 60 Length

110 Copper Sheet, Unpolished (Mill) Finish, Soft Temper, ASTM B152, 0.005″ Thickness, 12″ Width, 60″ Length

110 Copper Sheet, Unpolished (Mill) Finish, Soft Temper, ASTM B152, 0.005″ Thickness, 12″ Width, 60″ Length - Tensile strength, used to indicate the material’s overall strength, is the peak stress it can withstand before it breaks. Tin gives bronze more corrosion resistance than brass and greater strength than copper. The 110 copper sheet with soft temper is unpolished, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Formability indicates how easily the material can be permanently shaped. The material has a soft temper, meaning it has been soft annealed. Bronze is commonly an alloy of copper and tin, but sometimes it is copper alloyed with other elements such as aluminum, phosphorus, manganese, or silicon. Copper, a term that applies to alloys containing at least 99. It provides greater strength and better machinability than copper or bronze. The 110 copper alloy is 99. Brass is an alloy of copper and varying levels of zinc, sometimes with additional elements. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. Machinability describes how easily it can be cut, shaped, finished, or otherwise machined, while weldability characterizes the ability to be welded. 3% copper, offers very high thermal and electrical conductivity and provides corrosion resistance, formability, and machinability. Copper, brass, and bronze are known as red metals because they contain copper, which has a reddish color. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium. Copper and its alloys have temper designations, meaning the material has undergone a process to achieve certain properties of strength and hardness. 9% pure copper and has high conductivity and formability.

 

110mm Copper Surface Cleaning Port Drain Pipe Floor Repair Port Plug PVC Drain Pipe Plug Fittings

110mm Copper Surface Cleaning Port Drain Pipe Floor Repair Port Plug PVC Drain Pipe Plug Fittings

110mm Copper Surface Cleaning Port Drain Pipe Floor Repair Port Plug PVC Drain Pipe Plug Fittings - You can search keywords in our store i believe you can find the product you need. We make every effort to provide customers with satisfactory serviceany question,please feel free to contact me. Usa estimated delivery time 7-18 days(trackable),other countries expect delivery time 8-25 days—– we provide expedited shipping service 3-8 days(excluding handling time)if the order amount above us $200, we will use expedited shipping service for free. If it is not delivered within the specified time, or if it is not satisfactory you only need to send a refund request and we will refund you in full. We support enterprise orders, if the purchase quantity is large, it will automatically have a large discount.

 

110 Copper Bar Stock250 Thick x 750 Width x 2 Ft Length 1 Pc

110 Copper Bar Stock.250″ Thick x .750″ Width x 2 Ft. Length, 1 Pc.

110 Copper Bar Stock.250″ Thick x .750″ Width x 2 Ft. Length, 1 Pc. - Lead and nickel free. Wire size 10 ga. Length 50 ft, coil. Thickness tol +/-005″ h02 (1/2 hard) astm b187 high electrical conductivity and formability with 9999% copper content used in electrical applications as bus bars, wire connectors, gaskets, and rivets also known as etp copper. Free shipping in us / made is usa.

 

110 Copper Round Shim Unpolished Mill Finish H02H04 Temper ASTM B152 0010 Thickness 14 ID 38 OD Pack of 10

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.010″ Thickness, 1/4″ ID, 3/8″ OD (Pack of 10)

110 Copper Round Shim, Unpolished (Mill) Finish, H02/H04 Temper, ASTM B152, 0.010″ Thickness, 1/4″ ID, 3/8″ OD (Pack of 10) - Shapes include round, notched, and slotted. Wear resistance indicates the ability to prevent surface damage caused by contact with other surfaces. The 110 copper alloy has high electrical and thermal conductivity, and offers good corrosion resistance. They also can be used to fill gaps between machine parts that are prone to wear. It is nonmagnetic. Shims are thin pieces of material placed between objects for a variety of uses, including added support, improved leveling, increased insulation, tighter seals, or better spacing. The 110 copper round shim has an unpolished (mill) surface, meets american society for testing and materials international astm b152 specifications, and has a standard tolerance. Hardness (commonly measured as indentation hardness) describes its resistance to permanent surface deformation. Corrosion resistance describes the material’s ability to prevent deterioration caused by atmosphere, moisture, or other medium.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.