19 Most Wanted Nut Bearings

 

Whittet-Higgins BHI-13 Bearhug Threaded Shaft Bearing Locknut National Fine 2500-16 Right-Hand Thread Self-Locking Replaces Standard NIN-13

Whittet-Higgins BHI-13 Bearhug Threaded Shaft & Bearing Locknut, National Fine 2.500-16 Right-Hand Thread, Self-Locking, Replaces Standard NIN-13,

Whittet-Higgins BHI-13 Bearhug Threaded Shaft & Bearing Locknut, National Fine 2.500-16 Right-Hand Thread, Self-Locking, Replaces Standard NIN-13, - Balanced design for high speed applications. Made in usa. Provides 360 degrees of locking positions to installer for exact bearing preloading and adjustment. Easier and faster to install than traditional locknut & lockwasher. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque.

 

Whittet-Higgins PN-11 Precision Shaft Bearing Locknut UNS 2157-18 Right-Hand Thread Not Self-Locking Replaces SKF N 11 Standard N11 PRN-11

Whittet-Higgins PN-11 Precision Shaft & Bearing Locknut, UNS 2.157-18 Right-Hand Thread, Not Self-Locking, Replaces SKF N 11, Standard N11, PRN-11,

Whittet-Higgins PN-11 Precision Shaft & Bearing Locknut, UNS 2.157-18 Right-Hand Thread, Not Self-Locking, Replaces SKF N 11, Standard N11, PRN-11, - Doubles the number of locking positions for improved setting of assembly. Most cost effect precision bearing retaining line offered. Manufactured in usa. Manufactured to significantly exceed ansi /afbma standard 82-1999 specifications. Face to thread runout reduced fourfold (4x) to improve assembly alignment.

 

Whittet-Higgins NSHM-06 Shoelok Bearing Shaft Locknut Metric M30 x 15 Right-Hand Thread Self-Locking replaces FAG INA ZM30 ZMA3052 SKF KMK 6 KMT 6 Yinish YSF M30 X 15 YSFT-M30 X 15P

Whittet-Higgins NSHM-06 Shoelok Bearing & Shaft Locknut, Metric M30 x 1.5 Right-Hand Thread, Self-Locking, replaces FAG INA ZM30, ZMA30/52, SKF KMK 6, KMT 6, Yinish YSF M30 X 1.5, YSFT-M30 X 1.5P,

Whittet-Higgins NSHM-06 Shoelok Bearing & Shaft Locknut, Metric M30 x 1.5 Right-Hand Thread, Self-Locking, replaces FAG INA ZM30, ZMA30/52, SKF KMK 6, KMT 6, Yinish YSF M30 X 1.5, YSFT-M30 X 1.5P, - As these brass shoes are forced against the shaft, the shoelok is securely fastened to the shaft threads and allows precise adjustment and preloading of bearings and other mechanical components. Shoelokwhittet-higgins one-piece shoelok for bearing & power transmission retaining uses three (3) hex set screws tangent to the outside diameter to exert forces than press three (3) brass shoes towards the center of the shaft. Outside diameter 44. Thickness 14. 5–max. 2–thread size m30 x 1. Operating temperature 350°f–materials nut, hardened alloy / shoes, brass / fasteners, hardened alloyengineering support and cad drawing models available at manufacturer’s website. Benefits–self-locking–high axial loading capacity–balanced design for high speed applications–engineered to prevent assemblies from loosening from large forces of vibration, shock and torque–uniform 360 degree thread-clamping to center of shaft–longitudinal (z axis) access to adjusting and locking of retaining device of the assembly–easier and faster to install than traditional locknut & lockwasher–eliminates the need for cutting or repairing keyway in shaft–infinite adjustment and preloading capability–does not damage shaft threads when secured–meets and exceeds specifications of ansi /afbma standard 8. 5–max. 1-1986 and iso-2982–manufactured in usa–rohs compliantapplications–high speed assemblies–high precision assemblies–balanced assembly applications–off road equipment–mining, mineral extraction, and drilling operations–pulp, paper and steel mills rolls–pump manufacturers–numerous other machinery and equipment applicationsspecifications–max.

 

Whittet-Higgins KM 16 Threaded Shaft Bearing Locknut Metric M80 x 20 Right-Hand Thread Not Self-Locking Replaces FAG INA KM16 Generic KM16 SKF KM 16 Standard KM 16 Timken KM16

Whittet-Higgins KM 16 Threaded Shaft & Bearing Locknut, Metric M80 x 2.0 Right-Hand Thread, Not Self-Locking, Replaces FAG INA KM16, Generic KM16, SKF KM 16, Standard KM 16, Timken KM16,

Whittet-Higgins KM 16 Threaded Shaft & Bearing Locknut, Metric M80 x 2.0 Right-Hand Thread, Not Self-Locking, Replaces FAG INA KM16, Generic KM16, SKF KM 16, Standard KM 16, Timken KM16, - Manufactured to meet and exceed ansi /afbma standard 81-1986 and iso-2982 specifications. Aligns and locks bearings and other mechanical power transmission components. Prevents assemblies from loosening from large forces of vibration, shock, & torque. For standard axial load applications see whittet-higgins website for axial load data. Manufactured in usa.

 

Whittet-Higgins N-09 Threaded Shaft Bearing Locknut UNS 1767-18 Right-Hand Thread Not Self-Locking Replaces Rose N-09 SKF N 09 Standard N09 Timken N-09

Whittet-Higgins N-09 Threaded Shaft & Bearing Locknut, UNS 1.767-18 Right-Hand Thread, Not Self-Locking, Replaces Rose N-09, SKF N 09, Standard N09, Timken N-09,

Whittet-Higgins N-09 Threaded Shaft & Bearing Locknut, UNS 1.767-18 Right-Hand Thread, Not Self-Locking, Replaces Rose N-09, SKF N 09, Standard N09, Timken N-09, - Prevents assemblies from loosening from large forces of vibration, shock, & torque. Manufactured to meet ansi /afbma standard 82-1999 specifications. For standard axial load applications see whittet-higgins website for axial load data. Aligns and locks bearings and other mechanical power transmission components. Manufactured in usa.

 

Whittet-Higgins CNM-064 Threaded ClampnutShaft Bearing Locknut Collar Metric M32 x 15 Right-Hand Thread Self-Locking

Whittet-Higgins CNM-064 Threaded Clampnut/Shaft & Bearing Locknut Collar, Metric M32 x 1.5 Right-Hand Thread, Self-Locking,

Whittet-Higgins CNM-064 Threaded Clampnut/Shaft & Bearing Locknut Collar, Metric M32 x 1.5 Right-Hand Thread, Self-Locking, - Easier and faster to install than traditional locknut & lockwasher. Made in usa. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Slit locknut design with socket head cap screw provides single-point tangential locking. Black oxide coating with wax finish to inhibit corrosion.

 

Whittet-Higgins KM 19 Threaded Shaft Bearing Locknut Metric M95 x 20 Right-Hand Thread Not Self-Locking Replaces FAG INA KM19 Generic KM19 SKF KM 19 Standard KM 19 Timken KM19

Whittet-Higgins KM 19 Threaded Shaft & Bearing Locknut, Metric M95 x 2.0 Right-Hand Thread, Not Self-Locking, Replaces FAG INA KM19, Generic KM19, SKF KM 19, Standard KM 19, Timken KM19,

Whittet-Higgins KM 19 Threaded Shaft & Bearing Locknut, Metric M95 x 2.0 Right-Hand Thread, Not Self-Locking, Replaces FAG INA KM19, Generic KM19, SKF KM 19, Standard KM 19, Timken KM19, - Aligns and locks bearings and other mechanical power transmission components. Manufactured to meet and exceed ansi /afbma standard 81-1986 and iso-2982 specifications. Prevents assemblies from loosening from large forces of vibration, shock, & torque. Manufactured in usa. For standard axial load applications see whittet-higgins website for axial load data.

 

Whittet-Higgins BHM-18 High Strength Bearhug Threaded Shaft Bearing Locknut UNS 3527-12 Right-Hand Thread Self-Locking Replaces SKF an 17 Standard AN17 SN-17 SNH-18

Whittet-Higgins BHM-18 High Strength Bearhug Threaded Shaft & Bearing Locknut, UNS 3.527-12 Right-Hand Thread, Self-Locking, Replaces SKF an 17, Standard AN17, SN-17, SNH-18,

Whittet-Higgins BHM-18 High Strength Bearhug Threaded Shaft & Bearing Locknut, UNS 3.527-12 Right-Hand Thread, Self-Locking, Replaces SKF an 17, Standard AN17, SN-17, SNH-18, - Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Made in usa. Easier and faster to install than traditional locknut & lockwasher. Provides 360 degrees of locking positions to installer for exact bearing preloading and adjustment. High axial loading capacity.

 

Whittet-Higgins BMS-02 Corrosion Resistant Bearhug Threaded Shaft Bearing Locknut Metric M15 x 10 Right-Hand Thread Self-Locking Replaces Fuji FU02SUS Generic GUK15 GUK2

Whittet-Higgins BMS-02 Corrosion Resistant Bearhug Threaded Shaft & Bearing Locknut, Metric M15 x 1.0 Right-Hand Thread, Self-Locking, Replaces Fuji FU02SUS, Generic GUK15, GUK2,

Whittet-Higgins BMS-02 Corrosion Resistant Bearhug Threaded Shaft & Bearing Locknut, Metric M15 x 1.0 Right-Hand Thread, Self-Locking, Replaces Fuji FU02SUS, Generic GUK15, GUK2, - Easier and faster to install than traditional locknut & lockwasher. Provides 360 degrees of locking positions to installer for exact bearing preloading and adjustment. Made in usa. Corrosion resistant stainless steel. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque.

 

Whittet-Higgins BM-12 Bearhug Threaded Shaft Bearing Locknut Metric M60 x 20 Right-Hand Thread Self-Locking Replaces Fuji FU12SC FU12SS Generic GUK12 GUK60 SKF KM 12 Standard KM 12

Whittet-Higgins BM-12 Bearhug Threaded Shaft & Bearing Locknut, Metric M60 x 2.0 Right-Hand Thread, Self-Locking, Replaces Fuji FU12SC, FU12SS, Generic GUK12, GUK60, SKF KM 12, Standard KM 12,

Whittet-Higgins BM-12 Bearhug Threaded Shaft & Bearing Locknut, Metric M60 x 2.0 Right-Hand Thread, Self-Locking, Replaces Fuji FU12SC, FU12SS, Generic GUK12, GUK60, SKF KM 12, Standard KM 12, - Balanced design for high speed applications. Made in usa. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Easier and faster to install than traditional locknut & lockwasher. Provides 360 degrees of locking positions to installer for exact bearing preloading and adjustment.

 

Whittet-Higgins NS-08 Threaded Stainless Steel Shaft Bearing Locknut UNS 1563-18 Right-Hand Thread Not Self-Locking Replaces Rose N-08 SKF N 08 Standard N08 Timken N-08

Whittet-Higgins NS-08 Threaded Stainless Steel Shaft & Bearing Locknut, UNS 1.563-18 Right-Hand Thread, Not Self-Locking, Replaces Rose N-08, SKF N 08, Standard N08, Timken N-08,

Whittet-Higgins NS-08 Threaded Stainless Steel Shaft & Bearing Locknut, UNS 1.563-18 Right-Hand Thread, Not Self-Locking, Replaces Rose N-08, SKF N 08, Standard N08, Timken N-08, - The locknut is mounted and torqued up the shaft forcing the lockwasher forward until the desired preload and assembly seating is established. Operating temperature 350°f–material chromium-nickel stainless steelengineering support and cad drawing models available at manufacturer’s website. 448–thread size 1. Benefits–manufactured from corrosion resistant stainless steel–provides four (4) spanner slots which doubles the number locking positions for improved setting of assembly–accurately preloads bearings & other mechanical components–retains assemblies from loosening from larger forces of vibration, shock-loading, and torque –most cost effect bearing retaining line offered–no special tools required for installation of locknut and lockwasher–effective on both soft and hardened shafts–meets and exceeds specifications of ansi/abma 8. The locknut is rotationally adjusted to have the nearest slot and tang aligned then the tang of the lockwasher is bent into the slot of the locknut which prevents the power transmission components from disassembling during operation. Thickness 0. 563-18–max. 2-1991–manufactured in usa–rohs compliantapplications–high precision assemblies–gear box assemblies–packaging equipment–pump manufacturers–numerous other machinery and equipment applicationsspecifications–max. Basic locknut, corrosion resistantwhittet-higgins shaft locknuts for bearing & power transmission assemblies function by mounting a keyed and tanged shaft lockwasher between the bearing or other power transmission component and the corresponding locknut. Outside diameter 2. 250–max.

 

Whittet-Higgins TLN-05 Taperlok Shaft Bearing Locknut UNS 969-32 Right-Hand Thread Self-Locking Replaces SKF N 05 Standard N05 Taperline HTLN-05 TLN-05

Whittet-Higgins TLN-05 Taperlok Shaft & Bearing Locknut, UNS .969-32 Right-Hand Thread, Self-Locking, Replaces SKF N 05, Standard N05, Taperline HTLN-05, TLN-05,

Whittet-Higgins TLN-05 Taperlok Shaft & Bearing Locknut, UNS .969-32 Right-Hand Thread, Self-Locking, Replaces SKF N 05, Standard N05, Taperline HTLN-05, TLN-05, - Made in usa. Balanced design for high speed applications. Easier and faster to install than traditional locknut & lockwasher. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque. Black oxide coating with wax finish to inhibit corrosion.

 

Whittet-Higgins BL-16 Bearlok Bearing Shaft Locknut UNS 3137-12 Right Hand Thread Self-Locking replaces SKF AN 16 Standard AN16 Taperline HTLN-16-PH TLN-16-PH

Whittet-Higgins BL-16 Bearlok Bearing & Shaft Locknut, UNS 3.137-12 Right Hand Thread, Self-Locking, replaces SKF AN 16, Standard AN16, Taperline HTLN-16-PH, TLN-16-PH,

Whittet-Higgins BL-16 Bearlok Bearing & Shaft Locknut, UNS 3.137-12 Right Hand Thread, Self-Locking, replaces SKF AN 16, Standard AN16, Taperline HTLN-16-PH, TLN-16-PH, - Operating temperature 350°f–materials nut, low carbon steel / ring, hardened alloy / fasteners, hardened alloyengineering support and cad drawing models available at manufacturer’s website. 137-12 right hand –max. The ring has the same outer diameter as the main body of the nut, with a tapered bore matching that of the back of the nut. Thickness 0. The base nut has a thick walled main body, a thin externally tapered back that is slit, and threaded bore. By tightening the socket cap screws, the ring is tightened against the nut. Bearlokwhittet-higgins bearlok for bearing & power transmission retaining consists of base-nut, compression-ring, and socket head cap screws. Outside diameter 4. The tapered bore drives the sections of the rear of the nut radially inward, evenly securing the nut onto the shaftbenefits–high axial loading capacity–balanced design for high speed applications–engineered to prevent assemblies from loosening from large forces of vibration, shock and torque–uniform 360 degree thread-clamping to center of shaft–longitudinal (z axis) access to adjusting and locking of retaining device of the assembly–easier to install than traditional locknut & lockwasher–eliminates the need for cutting or repairing keyway in shaft–infinite adjustment and preloading capability–does not damage shaft threads when secured–manganese phosphate for corrosion resistance–meets and exceeds specifications of ansi /afbma standard 8. 720–max. 1-1986 and iso-2982–manufactured in usa–rohs compliantapplications–high speed assemblies–high precision assemblies–balanced assembly applications–off road equipment–mining, mineral extraction, and drilling operations–pulp, paper and steel mills rolls–pump manufacturersspecifications–max. 984–thread size 3.

 

JW Winco KM-3 KM Bearing Lock Nut M17 x 10 Thread 28 mm OD 5 mm Thickness 4 mm Slot Width-2 mm Slot Depth 4

J.W. Winco KM-3 KM Bearing Lock Nut, M17 x 1.0 Thread, 28 mm OD, 5 mm Thickness, 4 mm Slot Width-2 mm Slot Depth (4)

J.W. Winco KM-3 KM Bearing Lock Nut, M17 x 1.0 Thread, 28 mm OD, 5 mm Thickness, 4 mm Slot Width-2 mm Slot Depth (4) - For our selection of hook spanner wrenches for use with these components, din 1810a hook spanner wrenches with nose end. Mainly utilized to secure bearings onto a shaft.

 

Whittet-Higgins KM 5 Threaded Shaft Bearing Locknut Metric M25 x 15 Right-Hand Thread Not Self-Locking Replaces FAG INA KM5 Generic KM5 SKF KM 5 Standard KM 5 Timken KM5

Whittet-Higgins KM 5 Threaded Shaft & Bearing Locknut, Metric M25 x 1.5 Right-Hand Thread, Not Self-Locking, Replaces FAG INA KM5, Generic KM5, SKF KM 5, Standard KM 5, Timken KM5,

Whittet-Higgins KM 5 Threaded Shaft & Bearing Locknut, Metric M25 x 1.5 Right-Hand Thread, Not Self-Locking, Replaces FAG INA KM5, Generic KM5, SKF KM 5, Standard KM 5, Timken KM5, - Aligns and locks bearings and other mechanical power transmission components. Manufactured to meet and exceed ansi /afbma standard 81-1986 and iso-2982 specifications. Manufactured in usa. Prevents assemblies from loosening from large forces of vibration, shock, & torque. For standard axial load applications see whittet-higgins website for axial load data.

 

Whittet-Higgins PT-07 Precision Space-Saving Shaft Bearing Locknut UNS 1376-18 Right-Hand Thread Not Self-Locking Replaces Standard NTH-07 PRT-07

Whittet-Higgins PT-07 Precision Space-Saving Shaft & Bearing Locknut, UNS 1.376-18 Right-Hand Thread, Not Self-Locking, Replaces Standard NTH-07, PRT-07,

Whittet-Higgins PT-07 Precision Space-Saving Shaft & Bearing Locknut, UNS 1.376-18 Right-Hand Thread, Not Self-Locking, Replaces Standard NTH-07, PRT-07, - Reduced part thickness and outside for greater clearance reduced weight. Face to thread runout reduced fourfold (4x) to improve assembly alignment. Manufactured in usa. Manufactured to significantly exceed ansi /afbma standard 82-1999 specifications. Doubles the number of locking positions for improved setting of assembly.

 

Whittet-Higgins KM 9 Threaded Shaft Bearing Locknut Metric M45 x 15 Right-Hand Thread Not Self-Locking Replaces FAG INA KM9 Generic KM9 SKF KM 9 Standard KM 9 Timken KM9

Whittet-Higgins KM 9 Threaded Shaft & Bearing Locknut, Metric M45 x 1.5 Right-Hand Thread, Not Self-Locking, Replaces FAG INA KM9, Generic KM9, SKF KM 9, Standard KM 9, Timken KM9,

Whittet-Higgins KM 9 Threaded Shaft & Bearing Locknut, Metric M45 x 1.5 Right-Hand Thread, Not Self-Locking, Replaces FAG INA KM9, Generic KM9, SKF KM 9, Standard KM 9, Timken KM9, - Prevents assemblies from loosening from large forces of vibration, shock, & torque. Aligns and locks bearings and other mechanical power transmission components. For standard axial load applications see whittet-higgins website for axial load data. Manufactured in usa. Manufactured to meet and exceed ansi /afbma standard 81-1986 and iso-2982 specifications.

 

Whittet-Higgins BH-06 Bearhug Threaded Shaft Bearing Locknut UNS 1173-18 Right-Hand Thread Self-Locking replaces SKF N 06 Standard N06 SN-06

Whittet-Higgins BH-06 Bearhug Threaded Shaft & Bearing Locknut, UNS 1.173-18 Right-Hand Thread, Self-Locking, replaces SKF N 06, Standard N06, SN-06,

Whittet-Higgins BH-06 Bearhug Threaded Shaft & Bearing Locknut, UNS 1.173-18 Right-Hand Thread, Self-Locking, replaces SKF N 06, Standard N06, SN-06, - Provides 360 degrees of locking positions to installer for exact bearing preloading and adjustment. Easier and faster to install than traditional locknut & lockwasher. Made in usa. Balanced design for high speed applications. Self-locking prevents assemblies from loosening from large forces of vibration, shock and torque.

 

Whittet-Higgins N-13 Threaded Shaft Bearing Locknut UNS 2548-18 Right-Hand Thread Not Self-Locking Replaces Rose N-13 SKF N 13 Standard N13 Timken N-13

Whittet-Higgins N-13 Threaded Shaft & Bearing Locknut, UNS 2.548-18 Right-Hand Thread, Not Self-Locking, Replaces Rose N-13, SKF N 13, Standard N13, Timken N-13,

Whittet-Higgins N-13 Threaded Shaft & Bearing Locknut, UNS 2.548-18 Right-Hand Thread, Not Self-Locking, Replaces Rose N-13, SKF N 13, Standard N13, Timken N-13, - Manufactured in usa. Manufactured to meet ansi /afbma standard 82-1999 specifications. Prevents assemblies from loosening from large forces of vibration, shock, & torque. Aligns and locks bearings and other mechanical power transmission components. For standard axial load applications see whittet-higgins website for axial load data.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.