18 Best Instatherms

 

Instatherm Addition Funnel Ace Glass Incorporated #ad

Instatherm Addition Funnel, Ace Glass Incorporated

Instatherm Addition Funnel, Ace Glass Incorporated #ad - Caution never run instatherm® funnel dry or breakage can occur, especially at higher temperatures. Graduated addition funnel with instatherm® coating for critical heating. The funnel has a bottom inner standard taper joint (with ptfe stopcock) and an outer standard taper joint on top. Three-pronged plug for insertion into ace temperature controllers. The funnel can be hooked to an ace temperature controller and heated for liquefying solids or keeping liquids at a set temperature for addition to system or a reactor. Designed to operate up to 250ºc, heating response time is very rapid, (5° per minute), with very low thermal lag. Integral six-foot controller cord.

 

Instatherm Twist Lock Type Controller Cord with 10 amp fast-acting fuse new style - Instatherm Six-Foot Controller Cords Ace Glass Incorporated #ad

Instatherm Twist Lock Type Controller Cord with 10 amp “fast-acting” fuse (new style) – Instatherm Six-Foot Controller Cords, Ace Glass Incorporated

Instatherm Twist Lock Type Controller Cord with 10 amp “fast-acting” fuse (new style) – Instatherm Six-Foot Controller Cords, Ace Glass Incorporated #ad - Controller cords with various connectors for connecting all ace instatherm vessels to temperature controllers. Ordering information two versions (89075-444 and 71000-042) have “fast-acting” fuse to protect both the vessel and the controller from over-voltage or surges.

 

Instatherm High-Form Oil Bath Complete with Clip - Instatherm High-Form Oil Bath Ace Glass Incorporated #ad

Instatherm High-Form Oil Bath Complete with Clip – Instatherm High-Form Oil Bath, Ace Glass Incorporated

Instatherm High-Form Oil Bath Complete with Clip – Instatherm High-Form Oil Bath, Ace Glass Incorporated #ad - ” High form, borosilicate glass open vessels coated with ace instatherm®. Three-prong connector plug is designed to work with ace temperature controllers where the output voltage can be automatically limited to match the bath. Available as bath alone (with integral six-foot controller cord) or complete with clip for sensor and/or thermometer. Accommodates larger and taller vessels. “. A thermocouple well is imbedded in the insulation in this series. Ordering information ace temperature controller is not included and sold separately, contact your vwr representative for more information. Caution never run instatherm® baths dry or breakage can occur, especially at higher temperatures. Bath can also be matched with ace temperature thermocouple sensors for complete automatic operation. The bottom is uncoated so the bath can be put on any popular magnetic stirrer for stirring while heating. If using another type temperature controller, voltage should not exceed the rated voltage (stated below). Designed to operate up to 250°c, heating response time is very rapid, (5° per minute), with very low thermal lag. Baths are designed to run with oil or a heating media.

 

Instatherm Low-Form Oil Bath only - Instatherm Low-Form Oil Bath 12-Ft PTFE-Clad Cord Ace Glass Incorporated #ad

Instatherm Low-Form Oil Bath (only) – Instatherm Low-Form Oil Bath, 12-Ft. PTFE-Clad Cord, Ace Glass Incorporated

Instatherm Low-Form Oil Bath (only) – Instatherm Low-Form Oil Bath, 12-Ft. PTFE-Clad Cord, Ace Glass Incorporated #ad - ” Large, borosilicate glass vessel coated with ace instatherm. “. Ordering information ace temperature controller is not included and sold separately, contact your vwr representative for more information. The maximum temperature on this bath is 100°c. Caution never run instatherm baths dry or breakage can occur, especially at higher temperatures. The bath has a rolled lip for easy handling. Three-pronged plug for insertion into ace temperature controllers. The full capacity is 15 l without a vessel, and typically should have a minimum of six liters when using a vessel like a 5 l round bottom flask. Baths must be run with a heating media or oil. Available as bath alone (with integral 12-foot ptfe-clad controller cord) or complete with clip for sensor and/or thermometer. Can accept round-bottom flasks up to 5 l, and other large vessels.

 

Instatherm Flask Single Neck Round Bottom - Instatherm Flask Single Neck Round Bottom Ace Glass Incorporated #ad

Instatherm Flask, Single Neck, Round Bottom – Instatherm Flask, Single Neck, Round Bottom, Ace Glass Incorporated

Instatherm Flask, Single Neck, Round Bottom – Instatherm Flask, Single Neck, Round Bottom, Ace Glass Incorporated #ad - If using another type temperature controller, voltage should not exceed the rated voltage (stated below). Reinforced standatd taper 24/40 outer joint at top. Caution never run instatherm® baths dry or breakage can occur, especially at higher temperatures. Distilling, round-bottom flask with instatherm® provide a convenient, safe heating of contents. Designed to operate up to 250ºc, heating response time is very rapid, (5° per minute), with very low thermal lag. Integral six-foot controller cord. Flask can also be matched with ace temperature thermocouple sensors for complete automatic operation. Three-prong connector plug is designed to work with ace temperature controllers where the output voltage can be automatically limited to match the bath.

 

Instatherm Pin Type Controller Cord - Instatherm Six-Foot Controller Cords Ace Glass Incorporated #ad

Instatherm Pin Type Controller Cord – Instatherm Six-Foot Controller Cords, Ace Glass Incorporated

Instatherm Pin Type Controller Cord – Instatherm Six-Foot Controller Cords, Ace Glass Incorporated #ad - Ordering information two versions (89075-444 and 71000-042) have “fast-acting” fuse to protect both the vessel and the controller from over-voltage or surges. Controller cords with various connectors for connecting all ace instatherm vessels to temperature controllers.

 

Instatherm Banana Type Controller Cord with 10 amp fast-acting fuse for pre-2009 baths - Instatherm Six-Foot Controller Cords Ace Glass Incorporated #ad

Instatherm Banana Type Controller Cord with 10 amp “fast-acting” fuse (for pre-2009 baths) – Instatherm Six-Foot Controller Cords, Ace Glass Incorporated

Instatherm Banana Type Controller Cord with 10 amp “fast-acting” fuse (for pre-2009 baths) – Instatherm Six-Foot Controller Cords, Ace Glass Incorporated #ad - Ordering information two versions (89075-444 and 71000-042) have “fast-acting” fuse to protect both the vessel and the controller from over-voltage or surges. Controller cords with various connectors for connecting all ace instatherm vessels to temperature controllers.

 

Instatherm Beaker Griffin Low Form - Instatherm Beaker Griffin Low Form Ace Glass Incorporated #ad

Instatherm Beaker, Griffin Low Form – Instatherm Beaker, Griffin Low Form, Ace Glass Incorporated

Instatherm Beaker, Griffin Low Form – Instatherm Beaker, Griffin Low Form, Ace Glass Incorporated #ad - Bath can also be matched with ace temperature thermocouple sensors for complete automatic operation. Three-prong connector plug is designed to work with ace temperature controllers where the output voltage can be automatically limited to match the bath. “. The bottom is uncoated so the beaker can be put on any popular magnetic stirrer for stirring while heating. ” Griffin low-form beaker coated with ace instatherm. Designed to run with oil or a heating media. Has integral six-foot controller cord. If using another type temperature controller, voltage should not exceed the rated voltage (stated below). Ordering information ace temperature controller is not included and sold separately, contact your vwr representative for more information. Designed to operate up to 250°c, heating response time is very rapid, (5° per minute), with very low thermal lag. Caution never run instatherm beakers dry or breakage can occur, especially at higher temperatures.

 

Instatherm Flask Single Neck Round Bottom - Instatherm Flask Single Neck Round Bottom Ace Glass Incorporated #ad

Instatherm Flask, Single Neck, Round Bottom – Instatherm Flask, Single Neck, Round Bottom, Ace Glass Incorporated

Instatherm Flask, Single Neck, Round Bottom – Instatherm Flask, Single Neck, Round Bottom, Ace Glass Incorporated #ad - Three-prong connector plug is designed to work with ace temperature controllers where the output voltage can be automatically limited to match the bath. Flask can also be matched with ace temperature thermocouple sensors for complete automatic operation. Caution never run instatherm® baths dry or breakage can occur, especially at higher temperatures. Distilling, round-bottom flask with instatherm® provide a convenient, safe heating of contents. If using another type temperature controller, voltage should not exceed the rated voltage (stated below). Designed to operate up to 250ºc, heating response time is very rapid, (5° per minute), with very low thermal lag. Integral six-foot controller cord. Reinforced standatd taper 24/40 outer joint at top.

 

Instatherm Desiccator - Instatherm Desiccator Vacuum Oven Ace Glass Incorporated #ad

Instatherm Desiccator – Instatherm Desiccator, Vacuum Oven, Ace Glass Incorporated

Instatherm Desiccator – Instatherm Desiccator, Vacuum Oven, Ace Glass Incorporated #ad - The top has an observation stripe for visibility. This desiccator may be used as a vacuum oven at temperatures up to 180°c continuously. The complete set also includes an enviro-safe, organic liquid-filled thermometer and a glass 24/29 stopcock adapter. Both units are supplied with a vacuum take-off valve and a connecting controller cord. The instatherm vacuum oven desiccator has a heated bottom and an isulated cover.

 

Instatherm Low-Form Oil Bath Complete with Clip - Instatherm Low-Form Oil Bath 12-Ft PTFE-Clad Cord Ace Glass Incorporated #ad

Instatherm Low-Form Oil Bath Complete with Clip – Instatherm Low-Form Oil Bath, 12-Ft. PTFE-Clad Cord, Ace Glass Incorporated

Instatherm Low-Form Oil Bath Complete with Clip – Instatherm Low-Form Oil Bath, 12-Ft. PTFE-Clad Cord, Ace Glass Incorporated #ad - Can accept round-bottom flasks up to 5 l, and other large vessels. The maximum temperature on this bath is 100°c. Caution never run instatherm baths dry or breakage can occur, especially at higher temperatures. ” Large, borosilicate glass vessel coated with ace instatherm. Three-pronged plug for insertion into ace temperature controllers. Ordering information ace temperature controller is not included and sold separately, contact your vwr representative for more information. The bath has a rolled lip for easy handling. Available as bath alone (with integral 12-foot ptfe-clad controller cord) or complete with clip for sensor and/or thermometer. Baths must be run with a heating media or oil. “. The full capacity is 15 l without a vessel, and typically should have a minimum of six liters when using a vessel like a 5 l round bottom flask.

 

Instatherm High-Form Oil Bath Complete with Clip - Instatherm High-Form Oil Bath Ace Glass Incorporated #ad

Instatherm High-Form Oil Bath Complete with Clip – Instatherm High-Form Oil Bath, Ace Glass Incorporated

Instatherm High-Form Oil Bath Complete with Clip – Instatherm High-Form Oil Bath, Ace Glass Incorporated #ad - The bottom is uncoated so the bath can be put on any popular magnetic stirrer for stirring while heating. ” High form, borosilicate glass open vessels coated with ace instatherm®. Designed to operate up to 250°c, heating response time is very rapid, (5° per minute), with very low thermal lag. A thermocouple well is imbedded in the insulation in this series. Caution never run instatherm® baths dry or breakage can occur, especially at higher temperatures. Baths are designed to run with oil or a heating media. If using another type temperature controller, voltage should not exceed the rated voltage (stated below). Accommodates larger and taller vessels. “. Available as bath alone (with integral six-foot controller cord) or complete with clip for sensor and/or thermometer. Three-prong connector plug is designed to work with ace temperature controllers where the output voltage can be automatically limited to match the bath. Bath can also be matched with ace temperature thermocouple sensors for complete automatic operation. Ordering information ace temperature controller is not included and sold separately, contact your vwr representative for more information.

 

Instatherm Addition Funnel Ace Glass Incorporated #ad

Instatherm Addition Funnel, Ace Glass Incorporated

Instatherm Addition Funnel, Ace Glass Incorporated #ad - The funnel can be hooked to an ace temperature controller and heated for liquefying solids or keeping liquids at a set temperature for addition to system or a reactor. Integral six-foot controller cord. The funnel has a bottom inner standard taper joint (with ptfe stopcock) and an outer standard taper joint on top. Caution never run instatherm® funnel dry or breakage can occur, especially at higher temperatures. Designed to operate up to 250ºc, heating response time is very rapid, (5° per minute), with very low thermal lag. Three-pronged plug for insertion into ace temperature controllers. Graduated addition funnel with instatherm® coating for critical heating.

 

Drying Tube only for Instatherm Vacuum Drying Apparatus - Instatherm Vacuum Drying Apparatus Abderhalden Ace Glass Incorporated #ad

Drying Tube (only) for Instatherm Vacuum Drying Apparatus – Instatherm Vacuum Drying Apparatus, Abderhalden, Ace Glass Incorporated

Drying Tube (only) for Instatherm Vacuum Drying Apparatus – Instatherm Vacuum Drying Apparatus, Abderhalden, Ace Glass Incorporated #ad - Instantly variable jacket temperature, to 200°c, enables programmed drying. Instatherm coated jacket with a viewing strip for monitoring temperatures by means of an adjustable depth thermometer inserted into end, or a thermowell (6-7 mm od) may be substituted for the purpose of employing a thermister, controller probe, etc. The heater operates on ac or dc up to 40v, 3 amps. The 40/35 joint is ptfe-clad, the outer member polished, thus avoiding the use of grease. The desiccant tube is improved with joint reversed.

 

Instatherm Vacuum Drying Apparatus Abderhalden Complete - Instatherm Vacuum Drying Apparatus Abderhalden Ace Glass Incorporated #ad

Instatherm Vacuum Drying Apparatus, Abderhalden, Complete – Instatherm Vacuum Drying Apparatus, Abderhalden, Ace Glass Incorporated

Instatherm Vacuum Drying Apparatus, Abderhalden, Complete – Instatherm Vacuum Drying Apparatus, Abderhalden, Ace Glass Incorporated #ad - Instatherm coated jacket with a viewing strip for monitoring temperatures by means of an adjustable depth thermometer inserted into end, or a thermowell (6-7 mm od) may be substituted for the purpose of employing a thermister, controller probe, etc. Instantly variable jacket temperature, to 200°c, enables programmed drying. The 40/35 joint is ptfe-clad, the outer member polished, thus avoiding the use of grease. The heater operates on ac or dc up to 40v, 3 amps. The desiccant tube is improved with joint reversed.

 

Instatherm High-Form Oil Bath only - Instatherm High-Form Oil Bath Ace Glass Incorporated #ad

Instatherm High-Form Oil Bath (only) – Instatherm High-Form Oil Bath, Ace Glass Incorporated

Instatherm High-Form Oil Bath (only) – Instatherm High-Form Oil Bath, Ace Glass Incorporated #ad - Ordering information ace temperature controller is not included and sold separately, contact your vwr representative for more information. Caution never run instatherm® baths dry or breakage can occur, especially at higher temperatures. ” High form, borosilicate glass open vessels coated with ace instatherm®. A thermocouple well is imbedded in the insulation in this series. “. Available as bath alone (with integral six-foot controller cord) or complete with clip for sensor and/or thermometer. If using another type temperature controller, voltage should not exceed the rated voltage (stated below). Bath can also be matched with ace temperature thermocouple sensors for complete automatic operation. The bottom is uncoated so the bath can be put on any popular magnetic stirrer for stirring while heating. Designed to operate up to 250°c, heating response time is very rapid, (5° per minute), with very low thermal lag. Baths are designed to run with oil or a heating media. Three-prong connector plug is designed to work with ace temperature controllers where the output voltage can be automatically limited to match the bath. Accommodates larger and taller vessels.

 

Instatherm Block System Complete - Instatherm Block System Complete Ace Glass Incorporated #ad

Instatherm Block System, Complete – Instatherm Block System, Complete, Ace Glass Incorporated

Instatherm Block System, Complete – Instatherm Block System, Complete, Ace Glass Incorporated #ad - This complete instatherm®/dynabloc system allows you to combine the precise heating provided by instatherm® with magnetic stirring. The turnkey solution includes one 89083-400 aluminum dynabloc for 16mm tubes, a 120v economy 89076-514 temperature controller with “j” type thermocouple, a 7×7-inch magnetic stirrer, 12-inch 89084-730 aluminum rod, and a 1,200ml instatherm® bath (89075-354), complete with clip.

 

Instatherm High-Form Oil Bath only - Instatherm High-Form Oil Bath Ace Glass Incorporated #ad

Instatherm High-Form Oil Bath (only) – Instatherm High-Form Oil Bath, Ace Glass Incorporated

Instatherm High-Form Oil Bath (only) – Instatherm High-Form Oil Bath, Ace Glass Incorporated #ad - Baths are designed to run with oil or a heating media. Available as bath alone (with integral six-foot controller cord) or complete with clip for sensor and/or thermometer. ” High form, borosilicate glass open vessels coated with ace instatherm®. The bottom is uncoated so the bath can be put on any popular magnetic stirrer for stirring while heating. “. Designed to operate up to 250°c, heating response time is very rapid, (5° per minute), with very low thermal lag. Accommodates larger and taller vessels. Ordering information ace temperature controller is not included and sold separately, contact your vwr representative for more information. Three-prong connector plug is designed to work with ace temperature controllers where the output voltage can be automatically limited to match the bath. If using another type temperature controller, voltage should not exceed the rated voltage (stated below). A thermocouple well is imbedded in the insulation in this series. Bath can also be matched with ace temperature thermocouple sensors for complete automatic operation. Caution never run instatherm® baths dry or breakage can occur, especially at higher temperatures.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.