17 Coolest Pners

 

PFERD 48492 POLINOX PNER Unitized Non-Woven Abrasive Disc Silicon Carbide 4-12 Diameter x 12 Width 58-11 Arbor Hole Fine Grit 10000 rpm #ad

PFERD 48492 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon Carbide, 4-1/2″ Diameter x 1/2″ Width, 5/8-11 Arbor Hole, Fine Grit, 10000 rpm

PFERD 48492 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon Carbide, 4-1/2″ Diameter x 1/2″ Width, 5/8-11 Arbor Hole, Fine Grit, 10000 rpm #ad - Comfortable working with reduced vibration. The pner discs are recommended for working larger areas on stainless steel (inox) components. Rpm 6000 max. Rpm 10000. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. Polinox pner unitized discs achieve their best performance on variable-speed angle grinders at a cutting speed of about 6,900 sfpm. Specification diameter x width (inches) 4-1/2 x 1/2 arbor hole 5/8-11 abrasive silicon carbide grit fine grade mw density medium-soft spec. Pferd polinox pner unitized disc is used for end grinding on angle grinders. 3sf recom. The unitized fleece is bonded to a glass woven base.

 

PFERD 48504 POLINOX PNER Unitized Non-Woven Abrasive Disc Silicon Carbide 5 Diameter x 12 Width 58-11 Arbor Hole Fine Grit 10000 rpm #ad

PFERD 48504 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon Carbide, 5″ Diameter x 1/2″ Width, 5/8-11 Arbor Hole, Fine Grit, 10000 rpm

PFERD 48504 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon Carbide, 5″ Diameter x 1/2″ Width, 5/8-11 Arbor Hole, Fine Grit, 10000 rpm #ad - Pferd polinox pner unitized disc is used for end grinding on angle grinders. Polinox pner unitized discs achieve their best performance on variable-speed angle grinders at a cutting speed of about 6,900 sfpm. Specification diameter x width (inches) 5 x 1/2 arbor hole 5/8-11 abrasive silicon carbide grit fine grade mh density medium-hard spec. The pner discs are recommended for working larger areas on stainless steel (inox) components. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. 6sf recom. Rpm 10000. Comfortable working with reduced vibration. Rpm 5400 max. The unitized fleece is bonded to a glass woven base.

 

PFERD 48311 POLINOX PNER Non-Woven Abrasive Unitized Wheel Aluminum Oxide Soft 3 Diameter x 12 Width 15100 Maximum rpm #ad

PFERD 48311 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Soft, 3″ Diameter x 1/2″ Width, 15100 Maximum rpm

PFERD 48311 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Soft, 3″ Diameter x 1/2″ Width, 15100 Maximum rpm #ad - This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Rpm 6,400 max. 2am suitable drive arbor edp 69029 recom. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys. Pferd polinox pner unitized wheel have been designed for straight grinders and flexible shaft drives. Rpm 15100. Specification diameter x width (inches) 3 x 1/2 arbor hole 1/4 abrasive aluminum oxide grit medium grade w density soft spec.

 

PFERD 48313 POLINOX PNER Non-Woven Abrasive Unitized Wheel Aluminum Oxide Medium-Soft 3 Diameter x 12 Width 15100 Maximum rpm #ad

PFERD 48313 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Medium-Soft, 3″ Diameter x 1/2″ Width, 15100 Maximum rpm

PFERD 48313 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Medium-Soft, 3″ Diameter x 1/2″ Width, 15100 Maximum rpm #ad - Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. Rpm 15100. Pferd polinox pner unitized wheel have been designed for straight grinders and flexible shaft drives. Rpm 6,400 max. Specification diameter x width (inches) 3 x 1/2 arbor hole 1/4 abrasive aluminum oxide grit fine grade mw density medium-soft spec. 3af suitable drive arbor edp 69029 recom. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys.

 

PFERD 48362 POLINOX PNER Unitized Non-Woven Abrasive Wheel Aluminum oxide 6 Diameter x 18 Width 1 Arbor Hole Fine Grit 5100 rpm #ad

PFERD 48362 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Aluminum oxide, 6″ Diameter x 1/8″ Width, 1″ Arbor Hole, Fine Grit, 5100 rpm

PFERD 48362 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Aluminum oxide, 6″ Diameter x 1/8″ Width, 1″ Arbor Hole, Fine Grit, 5100 rpm #ad - Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys. Rpm 5100. Specification diameter x width (inches) 6 x 1/8 arbor hole 1 abrasive aluminum oxide grit fine grade h density hard spec. Rpm 3800 max. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. Polinox® unitized wheels achieve their best performance on special electronic fillet weld grinders. Comfortable working with reduced vibration. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Pferd polinox pner unitized wheels have been designed for variable-speed angle grinders and fillet weld grinders. It is recommended for working fillet welds and slots that are difficult to access or indentations in stainless steel (inox) components. 6am recom.

 

PFERD 48494 POLINOX PNER Unitized Non-Woven Abrasive Disc Silicon Carbide 4-12 Diameter x 12 Width 58-11 Arbor Hole Fine Grit 10000 rpm #ad

PFERD 48494 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon Carbide, 4-1/2″ Diameter x 1/2″ Width, 5/8-11 Arbor Hole, Fine Grit, 10000 rpm

PFERD 48494 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon Carbide, 4-1/2″ Diameter x 1/2″ Width, 5/8-11 Arbor Hole, Fine Grit, 10000 rpm #ad - The pner discs are recommended for working larger areas on stainless steel (inox) components. Rpm 6000 max. Specification diameter x width (inches) 4-1/2 x 1/2 arbor hole 5/8-11 abrasive silicon carbide grit fine grade mh density medium-hard spec. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. Pferd polinox pner unitized disc is used for end grinding on angle grinders. Polinox pner unitized discs achieve their best performance on variable-speed angle grinders at a cutting speed of about 6,900 sfpm. Comfortable working with reduced vibration. 6sf recom. Rpm 10000. The unitized fleece is bonded to a glass woven base.

 

PFERD 48358 POLINOX PNER Unitized Non-Woven Abrasive Wheel Aluminum Oxide 5 Diameter x 14 Width 78 Arbor Hole Medium Grit 6100 rpm #ad

PFERD 48358 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Aluminum Oxide, 5″ Diameter x 1/4″ Width, 7/8″ Arbor Hole, Medium Grit, 6100 rpm

PFERD 48358 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Aluminum Oxide, 5″ Diameter x 1/4″ Width, 7/8″ Arbor Hole, Medium Grit, 6100 rpm #ad - 8am recom. Specification diameter x width (inches) 5 x 1/4 arbor hole 7/8 abrasive aluminum oxide grit medium grade h density hard spec. Pferd polinox pner unitized wheels have been designed for variable-speed angle grinders and fillet weld grinders. Polinox® unitized wheels achieve their best performance on special electronic fillet weld grinders. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. Rpm 4500 max. It is recommended for working fillet welds and slots that are difficult to access or indentations in stainless steel (inox) components. Comfortable working with reduced vibration. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Rpm 6100. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system.

 

PFERD 48293 POLINOX PNER Non-Woven Abrasive Unitized Wheel Aluminum Oxide Medium-Soft 3 Diameter x 14 Width 15100 Maximum rpm #ad

PFERD 48293 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Medium-Soft, 3″ Diameter x 1/4″ Width, 15100 Maximum rpm

PFERD 48293 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Medium-Soft, 3″ Diameter x 1/4″ Width, 15100 Maximum rpm #ad - Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. 3af suitable drive arbor edp 69029 recom. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys. Specification diameter x width (inches) 3 x 1/4 arbor hole 1/4 abrasive aluminum oxide grit fine grade mw density medium-soft spec. Rpm 6,400 max. Rpm 15100. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Pferd polinox pner unitized wheel have been designed for straight grinders and flexible shaft drives.

 

PFERD 48291 POLINOX PNER Non-Woven Abrasive Unitized Wheel Aluminum Oxide Soft 3 Diameter x 14 Width 15100 Maximum rpm #ad

PFERD 48291 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Soft, 3″ Diameter x 1/4″ Width, 15100 Maximum rpm

PFERD 48291 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Soft, 3″ Diameter x 1/4″ Width, 15100 Maximum rpm #ad - Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. Specification diameter x width (inches) 3 x 1/4 arbor hole 1/4 abrasive aluminum oxide grit medium grade w density soft spec. Rpm 6,400 max. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. 2am suitable drive arbor edp 69029 recom. Pferd polinox pner unitized wheel have been designed for straight grinders and flexible shaft drives. Rpm 15100.

 

PFERD 48353 POLINOX PNER Unitized Non-Woven Abrasive Wheel Aluminum Oxide 5 Diameter x 14 Width 78 Arbor Hole Fine Grit 6100 rpm #ad

PFERD 48353 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Aluminum Oxide, 5″ Diameter x 1/4″ Width, 7/8″ Arbor Hole, Fine Grit, 6100 rpm

PFERD 48353 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Aluminum Oxide, 5″ Diameter x 1/4″ Width, 7/8″ Arbor Hole, Fine Grit, 6100 rpm #ad - Rpm 6100. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. Polinox® unitized wheels achieve their best performance on special electronic fillet weld grinders. Comfortable working with reduced vibration. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Pferd polinox pner unitized wheels have been designed for variable-speed angle grinders and fillet weld grinders. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. Rpm 4500 max. Specification diameter x width (inches) 5 x 1/4 arbor hole 7/8 abrasive aluminum oxide grit fine grade mw density medium-soft spec. 3af recom. It is recommended for working fillet welds and slots that are difficult to access or indentations in stainless steel (inox) components. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys.

 

PFERD 48470 POLINOX PNER Unitized Non-Woven Abrasive Disc Silicon carbide 4-12 Diameter x 12 Width 78 Arbor Hole Fine Grit 10000 rpm #ad

PFERD 48470 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon carbide, 4-1/2″ Diameter x 1/2″ Width, 7/8″ Arbor Hole, Fine Grit, 10000 rpm

PFERD 48470 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon carbide, 4-1/2″ Diameter x 1/2″ Width, 7/8″ Arbor Hole, Fine Grit, 10000 rpm #ad - Polinox pner unitized discs achieve their best performance on variable-speed angle grinders at a cutting speed of about 6,900 sfpm. Comfortable working with reduced vibration. Rpm 6000 max. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. The unitized fleece is bonded to a glass woven base. 2sf recom. The pner discs are recommended for working larger areas on stainless steel (inox) components. Specification diameter x width (inches) 4-1/2 x 1/2 arbor hole 7/8 abrasive silicon carbide grit fine grade w density soft spec. Rpm 10000. Pferd polinox pner unitized disc is used for end grinding on angle grinders.

 

PFERD 48480 POLINOX PNER Unitized Non-Woven Abrasive Disc Silicon Carbide 5 Diameter x 12 Width 78 Arbor Hole Fine Grit 10000 rpm #ad

PFERD 48480 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon Carbide, 5″ Diameter x 1/2″ Width, 7/8″ Arbor Hole, Fine Grit, 10000 rpm

PFERD 48480 POLINOX PNER Unitized Non-Woven Abrasive Disc, Silicon Carbide, 5″ Diameter x 1/2″ Width, 7/8″ Arbor Hole, Fine Grit, 10000 rpm #ad - Pferd polinox pner unitized disc is used for end grinding on angle grinders. Rpm 5400 max. The pner discs are recommended for working larger areas on stainless steel (inox) components. Specification diameter x width (inches) 5 x 1/2 arbor hole 7/8 abrasive silicon carbide grit fine grade w density soft spec. 2sf recom. The unitized fleece is bonded to a glass woven base. Comfortable working with reduced vibration. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. Rpm 10000. Polinox pner unitized discs achieve their best performance on variable-speed angle grinders at a cutting speed of about 6,900 sfpm.

 

PFERD 48425 POLINOX PNER Non-Woven Abrasive Unitized Wheel Aluminum Oxide Medium-Hard 6 Diameter x 1 Width 5100 Maximum rpm #ad

PFERD 48425 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Medium-Hard, 6″ Diameter x 1″ Width, 5100 Maximum rpm

PFERD 48425 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Medium-Hard, 6″ Diameter x 1″ Width, 5100 Maximum rpm #ad - This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Pferd polinox pner unitized wheel have been designed for straight grinders and flexible shaft drives. Rpm 5100. 6af suitable drive arbor edp 45714 recom. Rpm 3,200 max. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. Specification diameter x width (inches) 6 x 1 arbor hole 1 abrasive aluminum oxide grit fine grade mh density medium-hard spec. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys.

 

PFERD 48299 POLINOX PNER Non-Woven Abrasive Unitized Wheel Aluminum Oxide Hard 3 Diameter x 14 Width 18100 Maximum rpm #ad

PFERD 48299 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Hard, 3″ Diameter x 1/4″ Width, 18100 Maximum rpm

PFERD 48299 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Hard, 3″ Diameter x 1/4″ Width, 18100 Maximum rpm #ad - Rpm 18100. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys. Pferd polinox pner unitized wheel have been designed for straight grinders and flexible shaft drives. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. 8ac suitable drive arbor edp 69029 recom. Specification diameter x width (inches) 3 x 1/4 arbor hole 1/4 abrasive aluminum oxide grit coarse grade h density hard spec. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Rpm 6,400 max.

 

PFERD 48352 POLINOX PNER Unitized Non-Woven Abrasive Wheel Silicon Carbide 5 Diameter x 14 Width 78 Arbor Hole Fine Grit 6100 rpm #ad

PFERD 48352 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Silicon Carbide, 5″ Diameter x 1/4″ Width, 7/8″ Arbor Hole, Fine Grit, 6100 rpm

PFERD 48352 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Silicon Carbide, 5″ Diameter x 1/4″ Width, 7/8″ Arbor Hole, Fine Grit, 6100 rpm #ad - This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. 3sf recom. Pferd polinox pner unitized wheels have been designed for variable-speed angle grinders and fillet weld grinders. It is recommended for working fillet welds and slots that are difficult to access or indentations in stainless steel (inox) components. Rpm 4500 max. Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. Comfortable working with reduced vibration. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys. Specification diameter x width (inches) 5 x 1/4 arbor hole 7/8 abrasive silicon carbide grit fine grade mw density medium-soft spec. Rpm 6100. Polinox® unitized wheels achieve their best performance on special electronic fillet weld grinders.

 

PFERD 48315 POLINOX PNER Non-Woven Abrasive Unitized Wheel Aluminum Oxide Medium-Hard 3 Diameter x 12 Width 18100 Maximum rpm #ad

PFERD 48315 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Medium-Hard, 3″ Diameter x 1/2″ Width, 18100 Maximum rpm

PFERD 48315 POLINOX PNER Non-Woven Abrasive Unitized Wheel, Aluminum Oxide, Medium-Hard, 3″ Diameter x 1/2″ Width, 18100 Maximum rpm #ad - 6af suitable drive arbor edp 69029 recom. Rpm 6,400 max. Specification diameter x width (inches) 3 x 1/2 arbor hole 1/4 abrasive aluminum oxide grit fine grade mh density medium-hard spec. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. Rpm 18100. Pferd polinox pner unitized wheel have been designed for straight grinders and flexible shaft drives. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys.

 

PFERD 48359 POLINOX PNER Unitized Non-Woven Abrasive Wheel Aluminum Oxide 5 Diameter x 14 Width 78 Arbor Hole Coarse Grit 6100 rpm #ad

PFERD 48359 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Aluminum Oxide, 5″ Diameter x 1/4″ Width, 7/8″ Arbor Hole, Coarse Grit, 6100 rpm

PFERD 48359 POLINOX PNER Unitized Non-Woven Abrasive Wheel, Aluminum Oxide, 5″ Diameter x 1/4″ Width, 7/8″ Arbor Hole, Coarse Grit, 6100 rpm #ad - Ergonomically optimized products and power tools that contribute to greater safety and working comfort, and thus to health protection. It is recommended for working fillet welds and slots that are difficult to access or indentations in stainless steel (inox) components. Pner non-woven tools consist of multiple layer, strongly compressed non-woven material, bonded in a special grit resin system. Polinox® unitized wheels achieve their best performance on special electronic fillet weld grinders. Rpm 6100. This bonding system produces non-woven tools with excellent surface finishes, high stock removal and long tool life. 8ac recom. Rpm 4500 max. Provide medium flexibility when working on soft metals, alloys, high-alloy steels and titanium alloys. Specification diameter x width (inches) 5 x 1/4 arbor hole 7/8 abrasive aluminum oxide grit coarse grade h density hard spec. Comfortable working with reduced vibration. Pferd polinox pner unitized wheels have been designed for variable-speed angle grinders and fillet weld grinders.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.