16 Greatest Milling Machine Vises

 

Milling Machine Chip Guard for 5in or 6in vise 3 piece shield

Milling Machine Chip Guard for 5in or 6in vise, 3 piece shield

Milling Machine Chip Guard for 5in or 6in vise, 3 piece shield - I also include 2, m10 x 1. If you plan to not use this for a milling machine vise, but instead on a table, let me know. It will be a awesome addition to any hobbyist or shop mill vice to help control the spray of chips. The chip guard stands 6 inches tall and each piece is 6 inches wide. It will fit almost all 5 inch or 6 inch vise’s with threaded holes in the rear of the vise. Please contact me if you have any questions. The total length of the guard is about 19 inches wide and the chip guard is made out of 3/16″ thick acrylic. Sorry, the dirty vise in the picture is not included in the sale. This is a made in the usa chip shield for a milling machine vise. I can build one to your spec’s or i can add in a l bracket so you can clamp it down. 5 bolts, if your bolts are diffrent, please let me know and i will swap out for the correct bolts.

 

HFS R 4 SELF CENTERING MILLING MACHINE VISE ROUND HARDENED

HFS (R) 4″ SELF CENTERING MILLING MACHINE VISE ROUND HARDENED

HFS (R) 4″ SELF CENTERING MILLING MACHINE VISE ROUND HARDENED - 0005″ jaw plate threads 3/8″-16 jaw plate threads spacing 2. 25″ jaw plate height 1-1/2″ jaw plate thickness 0. 50″ overall length 15. According to the diameters ofits holding part,thedouble side v-block can be placed reversiblly. Fitted on the table of the machine as uprightand horizontal,the bottom of upright and horizotional is vertical. 95″ clamping repeatability +/-0. 590″ center of jaw plate thread hole to vise bed 0. The vice is fitted with a stop for location of the parts. Jaw width 4″ jaw opening (double station) 3. 689″ bed height 2. 50″ +/-0. 54″ jaw opening (single station) 9. Centered clamping of workpieces is pressured on the v-block by two wobbing movable jaws. Used to help machines in making some kinds of slots,holes and faces,suitable fo holding the workpieces of cylinder. 0002″ weight 50 lbs made of high-quality cast iron.

 

Vise Speed Handle For Kurt Style Milling Machine Vise Fits 4 Vise 916 Hex 1 Each

Vise Speed Handle, For Kurt Style Milling Machine Vise, Fits 4″ Vise (9/16″ Hex) (1 Each)

Vise Speed Handle, For Kurt Style Milling Machine Vise, Fits 4″ Vise (9/16″ Hex) (1 Each) - Durable construction with fine grain cast iron castings and hardened steel vise jaws. General purpose vise for both milling and grinding applications. Ground vise bed for smooth, consistent, and precise jaw movement.

 

Jet 384508K-200 Milling Machine Vise

Jet 384508/K-200 Milling Machine Vise

Jet 384508/K-200 Milling Machine Vise - The jet vise has an 8-inch jaw width, 5-7/8-inch jaw opening, a 2-1/4 inch jaw depth, and is 24-7/16-inches overall. The jet 384508/k-200 milling machine vise secures workpiece that need to be milled with removeable jaws and a base for a direct mount. The vise’s base swivels 180 degrees for flexibility and ease.

 

5 Milling Machine Accu-Lock Vise Without Base

5″ Milling Machine Accu-Lock Vise Without Base

5″ Milling Machine Accu-Lock Vise Without Base - This lock-tite precision machine vise has jaw width of 5″, jaw opening of 4-1/2″, jaw height of 1-3/8″, lock down jaw provides 1/2 pound of force vertically for each pound of horizontal force. This tool is without base, lock down type eliminates tilt and hammering. It features better clamping pressure, removed hinged handle, fast locking and the color is available in black or blue.

 

Clamps For 8 Vise Precision Milling Machine Vise

Clamps For 8″ Vise Precision Milling Machine Vise

Clamps For 8″ Vise Precision Milling Machine Vise - Durable construction with fine grain cast iron castings and hardened steel vise jaws. General purpose vise for both milling and grinding applications. Ground vise bed for smooth, consistent, and precise jaw movement.

 

ECO LLC Multifunction Milling Machine Vise Fixture Adjustable Work Table High Precision Compound Workbench for Bench Drill

ECO LLC Multifunction Milling Machine Vise Fixture Adjustable Work Table High Precision Compound Workbench for Bench Drill

ECO LLC Multifunction Milling Machine Vise Fixture Adjustable Work Table High Precision Compound Workbench for Bench Drill - The bench is made up of several adjustable dovetail aluminum alloy. The table applies to mini bench drill and drill bracket series. We can guarantee a minimum of space and to ensure accuracy. It is applied to other suitable machine.

 

VS-K4 4 K Type Milling Machine Vise

VS-K4 4″ K Type Milling Machine Vise

VS-K4 4″ K Type Milling Machine Vise - Large acme screw. Good quality medium duty vise. With swivel base, graduated in 180 degree. Replacement jaws.

 

Wilton 11615 Low Profile Milling Machine Vise with Base - 4-12 in Jaw Width 4 in Jaw Opening 1-14 in Jaw Depth

Wilton 11615 Low Profile Milling Machine Vise with Base – 4-1/2 in. Jaw Width, 4 in. Jaw Opening, 1-1/4 in. Jaw Depth

Wilton 11615 Low Profile Milling Machine Vise with Base – 4-1/2 in. Jaw Width, 4 in. Jaw Opening, 1-1/4 in. Jaw Depth - Wilton 11615 low profile milling machine vise with base, 4-1/2 in jaw width, 4 in jaw opening, 1-1/4 in jaw depth. Chassis two set groove center distances 200mm. External dimensions 337191118mm(lwh) weight 14kg. Biggest clamping force 19kn localization width of key 14mm. Mouth of the tongs width 100mm mouth of the tongs altitude 32mm.

 

TOTOOL 6 Precision Milling Machine Vises ACCU Lock Vise Jaw Opening 59inch Milling Drilling Machine Lock Down Vise Bench Clamp Multiple Vise Setups 6 Precision Milling Vise

TOTOOL 6″ Precision Milling Machine Vises ACCU Lock Vise Jaw Opening 5.9inch Milling Drilling Machine Lock Down Vise Bench Clamp Multiple Vise Setups (6″ Precision Milling Vise)

TOTOOL 6″ Precision Milling Machine Vises ACCU Lock Vise Jaw Opening 5.9inch Milling Drilling Machine Lock Down Vise Bench Clamp Multiple Vise Setups (6″ Precision Milling Vise) - Lock down design up to 80% deflection,all sides flattened. For small to intermediate manual milling, grinding, tapping operations in multiple vise set-ups with or without sub plates. The vise can be mounted on its base/bottom, on either side or upright it can also be mounted back to back to create a fast, easy and economical vise tombstone. 6” accu lock vise jaw width 6″ jaw opening 59″ jaw height 1-3/4″. Made from the highest quality ductile iron 80000 psi for minimum bending,chips cover protect leadscrew from damage vise body has a premium polychrommatic finish which is scratch and rust proof.

 

Wilton 11614 4-12-Inch Low Profile Milling Machine Vise

Wilton 11614 4-1/2-Inch Low Profile Milling Machine Vise

Wilton 11614 4-1/2-Inch Low Profile Milling Machine Vise - Ideal for applications where low overall height is necessary. Durable construction with fine grain cast iron castings and hardened smooth vise jaws. General purpose vise for both milling and grinding applications.

 

6 660U CNC MILLING MACHINE VISE 00004

6″ 660U CNC MILLING MACHINE VISE 0.0004″

6″ 660U CNC MILLING MACHINE VISE 0.0004″ - Unibody design of vise bed and stationary jaws improves clamping accuracy by eliminating jaw flex and provides greater strength than the conventional milling vise. Unlike other less expensive import vises, 660u offers key improvements to prevent jaw lifting by using a 45 degree wedge and a pivoting ground finished steel hemisphere in a milled pocket to hold down the movable jaw.

 

Wilton 11604 6-Inch Milling Machine Vise

Wilton 11604 6-Inch Milling Machine Vise

Wilton 11604 6-Inch Milling Machine Vise - General purpose vise for both milling and grinding applications. Durable construction with fine grain cast iron castings and hardened steel vise jaws. Ground vise bed for smooth, consistent, and precise jaw movement.

 

Wilton 12370 Milling Machine Vise

Wilton 12370 Milling Machine Vise

Wilton 12370 Milling Machine Vise - 1 7/8″ jaw depth. 4 3/8″ jaw opening. 63 pounds. 6″ jaw width. 5 9/16″ overall length.

 

Milling Machine Vise 6 In

Milling Machine Vise, 6 In

Milling Machine Vise, 6 In - Ground vise bed for smooth, consistent, and precise jaw movement. Durable construction with fine grain cast iron castings and hardened steel vise jaws. General purpose vise for both milling and grinding applications.

 

6 ANG-DOWN-LOCK MILLING MACHINE VISE w swivel base 850-600

6″ ANG-DOWN-LOCK MILLING MACHINE VISE w. swivel base #850-600

6″ ANG-DOWN-LOCK MILLING MACHINE VISE w. swivel base #850-600 - Fits the most popular machine vises. Patented griplock principle eliminates tilt of moveable jaw when it is clamped and also takes up wear four jaw plate positions allow extra capacity with jaw plates in the outside position all important surfaces precision ground max jaw opening 6″ jaw width 6″ jaw height 1-5/8″ oal 18″ overall height 6-1/2″ wt 105 lbs. Will work in left or right hand location. Bolt-on design, requires no modification to vise.





We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.