12 Best Whitney Tools

 

Whitney Tool 108070M42 Keyseat Milling Cutter Style 100 807 A 78 Cutting Diameter 14 Cutting Width M-42

Whitney Tool 108070M42 Keyseat Milling Cutter, Style 100 #807 (A), 7/8″ Cutting Diameter, 1/4″ Cutting Width, M-42

Whitney Tool 108070M42 Keyseat Milling Cutter, Style 100 #807 (A), 7/8″ Cutting Diameter, 1/4″ Cutting Width, M-42 - Key seat milling cutter style 100 #507 (10) 7/8″ x 5/32″ , m-42. Whitney tool woodruff keyseat cutters. Superior red hardness compared to conventional high speed steels. Compared to carbide, m42 is less prone to chipping when used for interrupted cuts. M42 permits shorter cycle times and higher feed rates in production environments.

 

Whitney Tool 103040 Keyseat Milling Cutter Style 100 304 2 12 Cutting Diameter 332 Cutting Width

Whitney Tool 103040 Keyseat Milling Cutter, Style 100, #304 (2), 1/2″ Cutting Diameter, 3/32″ Cutting Width

Whitney Tool 103040 Keyseat Milling Cutter, Style 100, #304 (2), 1/2″ Cutting Diameter, 3/32″ Cutting Width - Whitney tool key seat cutters are made to demanding tolerances to produce the most accurately sized slots and keyways. Key seat milling cutter style 100 #303 (212) 3/8″ x 3/32″. Key seat cutters have a 1/2” x 2” straight shank. Whitney tool woodruff keyseat cutters.

 

Whitney Tool 106050 Keyseat Milling Cutter Style 100 605 61 58 Cutting Diameter 316 Cutting Width

Whitney Tool 106050 Keyseat Milling Cutter, Style 100, #605 (61), 5/8″ Cutting Diameter, 3/16″ Cutting Width

Whitney Tool 106050 Keyseat Milling Cutter, Style 100, #605 (61), 5/8″ Cutting Diameter, 3/16″ Cutting Width - Whitney tool woodruff keyseat cutters. Key seat milling cutter style 100 #305 (4) 5/8″ x 3/32″. Whitney tool key seat cutters are made to demanding tolerances to produce the most accurately sized slots and keyways. Key seat cutters have a 1/2” x 2” straight shank.

 

Whitney Tool 96025 Series 3 Drill Extension Collet 14 Drill Size for Series 3 Drill Extension Body

Whitney Tool 96025 Series 3 Drill Extension Collet, 1/4″ Drill Size for Series 3 Drill Extension Body

Whitney Tool 96025 Series 3 Drill Extension Collet, 1/4″ Drill Size for Series 3 Drill Extension Body - Slim profile reaches areas other extensions cannot accommodate. Whitney tool collet type drill extension collets. Series 3 drill extension collet 1/4″ drill size (2500) for series 3 drill extension body. Requires series 3 extension body (sold separately) for use.

 

Whitney Tool 607506 Keyseat Milling Cutter Style 110 34 Cutter Diameter 332 Cutting Width

Whitney Tool 607506 Keyseat Milling Cutter, Style 110, 3/4″ Cutter Diameter, 3/32″ Cutting Width

Whitney Tool 607506 Keyseat Milling Cutter, Style 110, 3/4″ Cutter Diameter, 3/32″ Cutting Width - Key seat cutters have a 1/2” x 2” straight shank. Whitney tool narrow width slotting cutters. Whitney tool key seat cutters are made to demanding tolerances to produce the most accurately sized slots and keyways. Key seat milling cutter style 110, 3/4″ x 3/32″.

 

Whitney Tool 96012 Series 1 Drill Extension Collet 18 Drill Size for Series 1 Drill Extension Body

Whitney Tool 96012 Series 1 Drill Extension Collet, 1/8″ Drill Size for Series 1 Drill Extension Body

Whitney Tool 96012 Series 1 Drill Extension Collet, 1/8″ Drill Size for Series 1 Drill Extension Body - Series 1 drill extension collet 1/8″ drill size (1250) for series 1 drill extension body. Slim profile reaches areas other extensions cannot accommodate. Whitney tool collet type drill extension collets. Requires series 1 extension body (sold separately) for use.

 

Whitney Tool 602501 Keyseat Milling Cutter Style 110 14 Cutter Diameter 164 Cutting Width

Whitney Tool 602501 Keyseat Milling Cutter, Style 110, 1/4″ Cutter Diameter, 1/64″ Cutting Width

Whitney Tool 602501 Keyseat Milling Cutter, Style 110, 1/4″ Cutter Diameter, 1/64″ Cutting Width - Whitney tool narrow width slotting cutters. Key seat milling cutter style 110, 1/4″ x 1/64. Key seat cutters have a 1/2” x 2” straight shank. Whitney tool key seat cutters are made to demanding tolerances to produce the most accurately sized slots and keyways.

 

Whitney Tool CE-33-2 Burr-Zit Deburring Tool System II 3364 Hole Size

Whitney Tool CE-33-2 Burr-Zit Deburring Tool, System II, 33/64″ Hole Size

Whitney Tool CE-33-2 Burr-Zit Deburring Tool, System II, 33/64″ Hole Size - Up to 5,000 holes can be deburred before re-sharpening tools can be reground 6 to 20 times depending on size. Whitney tool burr-zit system ii fractional. Burr-zit deburring tool, system ii 33/64″ hole size. Constructed entirely of a single piece of m2 high speed steel integral cutting edges prevent obstruction by dirt or chips. Deburrs back side only for ferrous metals.

 

Whitney Tool 103030M42 Keyseat Milling Cutter Style 100 303 212 38 Cutting Diameter 332 Cutting Width M-42

Whitney Tool 103030M42 Keyseat Milling Cutter, Style 100 #303 (212), 3/8″ Cutting Diameter, 3/32″ Cutting Width, M-42

Whitney Tool 103030M42 Keyseat Milling Cutter, Style 100 #303 (212), 3/8″ Cutting Diameter, 3/32″ Cutting Width, M-42 - Superior red hardness compared to conventional high speed steels. Key seat milling cutter style 100 #2025 (206) 5/16″ x 1/16″ , m-42. Compared to carbide, m42 is less prone to chipping when used for interrupted cuts. Whitney tool woodruff keyseat cutters. M42 permits shorter cycle times and higher feed rates in production environments.

 

Whitney Tool 610006 Keyseat Milling Cutter Style 110 1 Cutting Diameter 332 Cutting Width

Whitney Tool 610006 Keyseat Milling Cutter, Style 110, 1″ Cutting Diameter, 3/32″ Cutting Width

Whitney Tool 610006 Keyseat Milling Cutter, Style 110, 1″ Cutting Diameter, 3/32″ Cutting Width - Key seat milling cutter style 110, 1″ x 3/64″. Whitney tool narrow width slotting cutters. Whitney tool key seat cutters are made to demanding tolerances to produce the most accurately sized slots and keyways. Key seat cutters have a 1/2” x 2” straight shank.

 

Whitney Tool 96024 Series 2 Drill Extension Collet 14 Drill Size for Series 2 Drill Extension Body

Whitney Tool 96024 Series 2 Drill Extension Collet, 1/4″ Drill Size for Series 2 Drill Extension Body

Whitney Tool 96024 Series 2 Drill Extension Collet, 1/4″ Drill Size for Series 2 Drill Extension Body - Whitney tool collet type drill extension collets. Slim profile reaches areas other extensions cannot accommodate. Requires series 2 extension body (sold separately) for use. Series 2 drill extension collet 1/4″ drill size (2500) for series 2 drill extension body.

 

Whitney Tool 30328 Keyseat Milling Cutter Solid Carbide 38 Cutting Diameter 332 Cutting Width

Whitney Tool 30328 Keyseat Milling Cutter, Solid Carbide, 3/8″ Cutting Diameter, 3/32″ Cutting Width

Whitney Tool 30328 Keyseat Milling Cutter, Solid Carbide, 3/8″ Cutting Diameter, 3/32″ Cutting Width - Key seat milling cutter solid carbide, 3/8″ x 3/64″. Whitney tool small solid carbide keyseat. Solid carbide key seat cutters offer improved edge retention and rigidity in most applications. Whitney carbide milling cutters provide shorter cycle times and higher feed rates in production environments.